it works fine. Just flash A11 xiaomi.eu rom firstDoesn't work for 9T Lime Global version. I tried everything. Does the base ROM have to be android 11?
it works fine. Just flash A11 xiaomi.eu rom firstDoesn't work for 9T Lime Global version. I tried everything. Does the base ROM have to be android 11?
What do you mean when you say a11? I bought this phone in Taiwan. Is it okay for me to flash the Taiwan redmi from the link? It's Android 10
you need android 11 firmware to flash custom ROM.What do you mean when you say a11? I bought this phone in Taiwan. Is it okay for me to flash the Taiwan redmi from the link? It's Android 10
Okay. So I borked my system and was able to re install the stock ROM! Thank you for posting the steps . I ended up trying an easier method which was using the tool that Francesco Tescari developed.
Thanks for posting steps!!! It got me started down the road to my solution. I used the tool by Francesco Tescari for flashing Xiaomi and it worked!Okay, so you need:
- MiFlash, for example this version: https://www.mediafire.com/file/md2c3alvuj5zlol/MiFlash2018-5-28-0.zip/file
- Fastboot and ADB: https://www.xda-developers.com/google-releases-separate-adb-and-fastboot-binary-downloads/
- Some recovery, for example OrangeFox: https://xdaforums.com/t/recovery-un...dmi-note-9-4g-redmi-9t-poco-m3.4257459/unread
- Latest stock: https://xiaomifirmwareupdater.com/miui/lime/ (depends which region you have)
- Miui 21.x.xx using Android 11.0 (depends on your region and codename again)
- A custom ROM zip.
Soooo, lets go.
Turn off your phone, wait for 3 seconds, then press volume down and power buttons simultaneously until you see the fastboot logo (you won't miss it)
Connect the phone to the computer (do it fast, because the phone will turn off after a few seconds without being connected to the computer)
Back up all of the data on your phone if possible, then open MiFlash app, click refresh. Make sure your device is showing up.
Select your unpacked 12.0.90 or smething like that (miui 12, android 10) and flash it. Make sure you have ticked the clean all, not clean all and lock. Your bootloader should be unlocked.
Click flash.
Wait for the process to be finished
Flash the custom ROM
After your phone has rebooted successfully, turn it off and go into the fastboot mode again. Connect the phone to the computer
Launch the command line and go to the folder where you put your recovery.img from orangefox recovery, and boot it. (https://wiki.orangefox.tech/en/guides/installing_orangefox)
You will see the recovery on your phone, probably prompting to enter the password. Choose "Cancel"
In the main menu, choose "Wipe", then tap "Format Data". Type "yes".
On your computer, copy all the ZIPs you've downloaded earlier to your phone.
wipe dalvik cache, cache and data.
Go to wipe > format data, type "yes" then click to proceed.
reboot to recovery, and flash xiaomi rom using miui 21.x.xx, based on android 11.
After flash, wipe cache, and boot your miui.
When booted, go to recovery, wipe dalvik cache, cache and data.
Flash your rom, and optional gapps and magisk.
Then reboot, that's all.
android11 xiaomi eu 12.5 or 12.6What do you mean when you say a11? I bought this phone in Taiwan. Is it okay for me to flash the Taiwan redmi from the link? It's Android 10
Do I need to install the miui os again? I'm at the point now where if I boot to system it's the setup for installing miui 12.xx onto my phone. If I install it, will it lock my phone?Okay, so you need:
- MiFlash, for example this version: https://www.mediafire.com/file/md2c3alvuj5zlol/MiFlash2018-5-28-0.zip/file
- Fastboot and ADB: https://www.xda-developers.com/google-releases-separate-adb-and-fastboot-binary-downloads/
- Some recovery, for example OrangeFox: https://xdaforums.com/t/recovery-un...dmi-note-9-4g-redmi-9t-poco-m3.4257459/unread
- Latest stock: https://xiaomifirmwareupdater.com/miui/lime/ (depends which region you have)
- Miui 21.x.xx using Android 11.0 (depends on your region and codename again)
- A custom ROM zip.
Soooo, lets go.
Turn off your phone, wait for 3 seconds, then press volume down and power buttons simultaneously until you see the fastboot logo (you won't miss it)
Connect the phone to the computer (do it fast, because the phone will turn off after a few seconds without being connected to the computer)
Back up all of the data on your phone if possible, then open MiFlash app, click refresh. Make sure your device is showing up.
Select your unpacked 12.0.90 or smething like that (miui 12, android 10) and flash it. Make sure you have ticked the clean all, not clean all and lock. Your bootloader should be unlocked.
Click flash.
Wait for the process to be finished
Flash the custom ROM
After your phone has rebooted successfully, turn it off and go into the fastboot mode again. Connect the phone to the computer
Launch the command line and go to the folder where you put your recovery.img from orangefox recovery, and boot it. (https://wiki.orangefox.tech/en/guides/installing_orangefox)
You will see the recovery on your phone, probably prompting to enter the password. Choose "Cancel"
In the main menu, choose "Wipe", then tap "Format Data". Type "yes".
On your computer, copy all the ZIPs you've downloaded earlier to your phone.
wipe dalvik cache, cache and data.
Go to wipe > format data, type "yes" then click to proceed.
reboot to recovery, and flash xiaomi rom using miui 21.x.xx, based on android 11.
After flash, wipe cache, and boot your miui.
When booted, go to recovery, wipe dalvik cache, cache and data.
Flash your rom, and optional gapps and magisk.
Then reboot, that's all.
If you have now custom recovery, just flash miui 12.x.5 (android 11), then reboot to recovery and flash custom rom:Do I need to install the miui os again? I'm at the point now where if I boot to system it's the setup for installing miui 12.xx onto my phone. If I install it, will it lock my phone?
Tried it. Getting errorIf you have now custom recovery, just flash miui 12.x.5 (android 11), then reboot to recovery and flash custom rom:
After flash, wipe cache, and boot your miui.
When booted, go to recovery, wipe dalvik cache, cache and data.
Flash your rom, and optional gapps and magisk.
Then reboot, that's all.
Ok. So I installed the MIUI and it didn't lock my phone. It erased my recovery so there's that, but now. I have MIUI version: Global 12.0.9 Stable.If you have now custom recovery, just flash miui 12.x.5 (android 11), then reboot to recovery and flash custom rom:
After flash, wipe cache, and boot your miui.
When booted, go to recovery, wipe dalvik cache, cache and data.
Flash your rom, and optional gapps and magisk.
Then reboot, that's all.
you should have MIUI 12.5.xx, then go to recovery and do all what you saidOk. So I installed the MIUI and it didn't lock my phone. It erased my recovery so there's that, but now. I have MIUI version: Global 12.0.9 Stable.
So I will re flash recovery. Then go to recovery, wipe dalvik, cache and data, and then flash from, happy and magisk. I think this should work?
Why is 12.5.xx needed? I don't understand. Previous ROMs I have used have not needed any MIUIyou should have MIUI 12.5.xx, then go to recovery and do all what you said
my rom doesn't uses custom vendor for now, so MIUI 12.5 is necessaryWhy is 12.5.xx needed? I don't understand. Previous ROMs I have used have not needed any MIUI
the base files on 12.0.x below is android 10 based. You need android 11 based since all the roms for this device seems to be on android 11Why is 12.5.xx needed? I don't understand. Previous ROMs I have used have not needed any MIUI
you can use the 12.6 no problem. its the one i used on mineHello, I want to try to flash and try your custom rom on my device, but before that I want to ask regarding the Xiaomi EU port, can I use the latest android 11 12.6.x version weekly build? or do I need to specifically use the 12.5.x version in order for this custom rom to wok?
I'll be maintaining other rom, more stable, more customisation and more features.
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
[LIST]
[U][B]STATUSBAR:[/B][/U]
[*]Statusbar icons.
[*]Traffic indicators.
[*]4G Icon Instead of LTE.
[*]VoLTE icon toggle.
[*]VoLTE & VoWiFi icon styles.
[*]Clock Customization.
[*]Battery Customization.
[*]Old mobile type indication.
[U][B]Navigation Bar:[/B][/U]
[*]Enable/Disable Navbar.
[*]Navbar Tuner.
[U][B]QUICK SETTINGS:[/B][/U]
[*]QS brightness slider position.
[*]Battery percentage selection.
[*]Auto brightness icon toggle.
[*]Brightness control buttons.
[*]Quick pulldown option.
[*]Vibrate on touch.
[U][B]LOCKSCREEN:[/B][/U]
[*]Charging info.
[*]Fingerprint Authentication Vibration.
[U][B]BUTTONS:[/B][/U]
[*]H/W keys customization.
[*]H/W buttons backlight customizations.
[*]Volume rocker wake.
[U][B]NOTIFICATIONS:[/B][/U]
[*]Incall Vibrations.
[*]Battery light customizations.
[*]Notifications light customizations.
[*]Less boring Headsup.
[*]Headsup snooze & timeout option.
[*]Ambient display customizations .
[U][B]MISC:[/B][/U]
[*]Three Finger Screenshot.
[*]Wake on plug.
[U][B]Others:[/B][/U]
[*]Advanced Reboot.
Lots more to come soon!..Stay Tuned!!![/LIST]
Known bug , has been fixed on derpfest , will be fixed soon on all roms igI used Redmi 9T. I flashed anh I have issue with Brightness bar. It don't work true. when I pull the minimum it is brightest