[CLOSED] [ROM][12.1][OnePlus6][OFFICIAL]Syberia Project
- Thread starter DennySPB
- Start date
- Status
I have updated directly from the updater and now my GApps are uninstalled.
I tried flashing again from the new AOSP recovery but I get an error. How should I proceed with installing gapps if I don't want to wipe my data again?
My data partition is still ext4 and not f2fs.
I tried flashing again from the new AOSP recovery but I get an error. How should I proceed with installing gapps if I don't want to wipe my data again?
My data partition is still ext4 and not f2fs.
After this, I backed up my data, flashed TWRP_3.6.0_11-0, Flashed Orangefox, Flashed GApps and rebooted. Et voila, update complete!
I've unlocked the bootloader and now trying to install TWRP from [this guide](https://forum.xda-developers.com/t/oneplus-6-unlock-bootloader-flash-twrp-root-nandroid-efs-backup.3792643/) using TWRP version 3.6.0 from [here](https://eu.dl.twrp.me/enchilada/). When I run `fastboot boot twrp.img`, the phone stays at the TWRP splash screen.
Any solution for installing TWRP?
Any solution for installing TWRP?
You need to install Twrp Nebrassy, boot into Twrp, then flash the latest TWRP.
Hey bud, perhaps you can assist with a question. Can I dirty flash Gapps over an existing gapps package? I seemed to have flashed Gapps with Google Go, but need the full Gapps package
So I use Twrp Nebrassy to boot into TWRP then flash the latest TWRP from https://eu.dl.twrp.me/enchilada/ (3.6 currently)?
So I use Twrp Nebrassy to boot into TWRP then flash the latest TWRP from https://eu.dl.twrp.me/enchilada/ (3.6 currently)?
Which twrp u r using previously?
fatsboot boot file name.IMG
If.its booted then go to advance and select falsh current twrp.
Now twrp is permanent.
If still it sticks at splash screen then do
fatsboot -w
This will wipe u r data
Then falsh twrp
fatsboot boot file name.IMG
Yep... It's been discussed somewhere on here, that Twrp Nebrassy will get you sorted.. then install your ROM, Gapps and flash the latest 3.6 version or whatever it is. After you have installed the latest TWRP, you should no longer be stuck on the splash screen
Never use full gapps they are causing system full issue .
U can falsh gapps over existing gapps package no issue
Hi, this didn't work.
I just unlocked my bootloader today and had no TWRP installed before this. This is the first time I'm trying to root this phone.
When you say `Then flash twrp` after fastboot -w, how exactly do we do that? And can we get back to a working device if after fastboot -w, TWRP doesn't install for some reason?
I'm on Android 11 OOS 11 (build number A6000_22_210805).
Did you try the Nebrassy flash route first via CMD? Put phone into fastboot mode then flash nebrassy
Cd downloads
Cd fastboot
Cd fastboot fastboot boot twrp.twrpnebrassy.img
This worked for me, as i had the same issue as you, where i flashed the latest twrp, and got stuck on the twrp splash screen
After nebrassy is loaded, you will be able to boot into twrp, and then be able to flash the latest twrp
TWRP-3.5.2-enchilada-Nebrassy-2.img | by Nebrassy for OnePlus 6
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
Trying this now.TWRP-3.5.2-enchilada-Nebrassy-2.img | by Nebrassy for OnePlus 6
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.androidfilehost.com
- Status
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
4┤Thread Closed for one week due to multiple GPL violations├┤OP may appeal this lock from 24 May 2022 10PM GMT onward├2
for me it is working without any problem - EUDoes it fix Mobile data bug..??
Signal bars with exclamation
symbol..??
I have to reboot to fix it.. but in current build it is so often it is annoying..
System>Gestures, there is the option to hide it
had the same problem. turn off phone press volume up and power until you boot into fastboot, select recovery. It didnt boot into twrp, but the syberia recover. Click wipe option and press format data/factory reset. That fixed the stuck boot animation
works for me
was looking for installation guide for this os and the description on first page got me a littl confused so here is one in case you are also from latest OOS11 locked bootloader
1. unlock bootloader -> this will wipe your data (do a backup)
2. flash twrp img and in twrp flash the zip
3. wipe your data in twrp just in case if you didn't had to unlock bootloader
4. flash syberia os
5. do a factory reset/format data/wipe in twrp or the recovery from syberia os (my twrp was gone after the flash)
6. enjoy
so far i didnt had any problems, everything works smooth after i used the OS for a while. First start of apps were kinda slow.
For me the Animationspeed for app launches were a little slow, i recommend to speed it up by adjusting the animation speed in the dev options.
I set it for my preference to 0.5, but 0.7-0.8 should do the trick1Hi! Since I installed this ROM I have been having issues with the Ringback tone.
Ringback tone - When you call someone, before they pick up the call, we get to hear a beeping or a ringing sound showing that the call is going through or not.
I am not able to hear that. It is just blank until someone picks up the call. Any solution to this please? It has been driving me crazy1I flashed this rom about a 2 months ago, it's working like a charm, it made me appreciate this phone again, Thank you so much.
I'm still on 5.2 I want to update to the latest version to get the new version but I'm afraid I may screw up something I don't want to risk since the phone is working perfectly right now.
I tried to follow the update instructions but once I reboot into recovery I only get the built in one not TWRP. is there something wrong and what's the best approach to update the rom?
Thank you. -
44
Code:/* * Your warranty is now void. * * Syberia Team not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications. */
Read the whole OP! Be respectful to each other and don't ask for ETAs, it's considered as being rude!
Syberia Project (aka Syberia OS) is a custom ROM for OnePlus 6 that implements various features. This project was designed by our "Syberia Team" from
scratch based on AOSP source code with some CAF fixes and improvements. Our team: @DennySPB, @blinoff82, @alexxxdev. Also many thanks to our designers @rlshukhov and
@a18h for logos, wallpapers and bootanimations.
If you like our work you can buy us a cup of coffee or a glass of beer
Here
Code:Monet VoLTE, VoWiFi LineageOS LiveDisplay MicroG support Pocket Judge Call recording Statusbar items switches Three finger swipe to screenshot Extended powermenu Scramble pin layout option Quick pin unlock option PowerOff torch on power button Volume rocker wakup option Volume key music controll More VoLTE/VoWifi statusbar icons Advanced gesture navigation options Lockscreen charging information DataSwitch tile Volume keys cursor control Statusbar clock/date customization Lockscreen visualizer Lockscreen media art toggle with blur options Statusbar battery styles Flipendo (extreme battery saver) tile Brightness slider in QS options Reboot QS tile Separate wifi/data QS tiles Caffein QS tile Sound tile Flash on call waiting option Network traffic monitor Battery/Notification LED lights customization NavBar inverse option ...Settings and features will be gradually added.
SyberiaOS ROM Download
Gapps Download (recommended)
Magisk Alpha Download
OOS 11 Firmware
First time clean installation:
Code:- Unlocked bootloader is required - Download ROM.zip, latest OOS 11 firmware (optional: Gapps, Magisk) and put to internal memory - Boot into TWRP - Once twrp booted go to "Install" -> choose ROM.zip - Reboot -> recovery - Go to "Install" -> choose OOS firmware.zip, Gapps.zip (optional Magisk, Gapps-Addons etc.) - Go to "Wipe" -> Swipe for factory reset, then Format data (via "yes") - Reboot -> System - Enjoy.
Updating:
Code:- Reboot into TWRP - Go to "Install" -> choose ROM.zip - Reboot -> recovery - Go to "Install" -> choose Gapps.zip (optional Magisk, Gapps-Addons etc.) - Reboot -> System
Code:Encryption may not work
Attention! We are not responsible for the operability of your device if you use third-party kernel, Xposed Framework or unverified Magisk modules.
Official website
Syberia Project Github
Syberia Project Gerrit
Syberia Project Kernel Source
Code:- LineageOS - AOSPA (aka Paranoid Android) - Nitrogen Project - Benzo Rom
14This is the sequence that I have used, and I have gotten it to start:
1 Orangefox recovery: disabled dm varity and forced encryption, reboot to recovery
2 Flash syberian 12 and orangefox recovery (marking the same options) and reboot to recovery
3 flash fw_op6.zip, flash gapps and magisk
4 format data
5 Reboot and enjoy android 12
New posts
-
How To Guide [GUIDE] [Magisk] [Unlock / ROOT / Keep Root] OOS 12-C.48- Latest: TheGhost1951
-
