Software Development [CLOSED] [ROM] [CUSTOM] [INTEL JOYING] GTX joying ROM V9a3 2018-04-22
- Thread starter gtxaspec
- Start date
- Status
I mentioned before that I have the exact same device and it works.
it's restarting because of high temperature.
after flashing the rom. take of the key fob from ignition and let it off for a while then try again.
do a checkdisk or reformat of your usb-stick. It is corrupt and therefore the zip is corrupt.
Umieściłem pliki na karcie SD
jak zrobić dysk kontrolny możesz mi opisać krok po kroku
Attachments
Last edited:
it comes to this point and resets itself and so on
Attachments
Your photo of the CPU heat shield says that it is a FYT 6023, which is indeed a Sofia 3GR.
It gets too hot. This is one of the weak spots of these older units. It has been mentioned many times before in this thread.
Use something to cool it when you flash it. So use a hair dryer (on cold) or a fan to blow cool air onto this heat shield while doing the flashing and hope it comes through.
It is terribly old and slow by now.You can't get any higher than Android 6.0.
You better look out for another FYT model: either the somewhat slower and cheaper uis8581a (sc9863), but much faster than that old Sofia 3GR, or the fastest option possible which is a uis7862.
For 170~210 euros you buy a Mekede uis8581a with 4GB/64GB. The Mekede uis7862 4GB/64GB start by 210 euros, unless you go for a M6Pro which are also starting at around 400 euro.
There are also other brands to considere. This would simply be a good choice. Joying is slightly better but also on avarage 200 euros more expensive.
Buy T'eyes if you really want such a unit. Otherwise don't as it contains too much closed software.
For this Sofia unit? There is no software at all anymore. It is so old that it has long gone out of support.
No, that is what I said. There is no software to download at all. Only this GTX-rom. Not one single reseller has it anymore available for download.
If it was up to me I would ask a moderator to close this thread and remove the download links.
Edit: I just asked the moderators to close this thread and remove the downloadable links from the first posts. The OP/creator also left this forum years ago. The last 3 users only ended up having unrecoverable issues. Why support a completely outdated, not reseller supported T-Ford when you can drive an electric car?
Last edited:
- Status
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
51========================================ACHTUNG===================
=================WARNING==========================================
=====================================================PELIGRO=======
AS WITH ANY UNSUPPORTED SYSTEM MODIFICATIONS, USING THIS MAY LEAD TO A BRICK
IF YOU DON'T KNOW WHAT YOU ARE DOING ( HAVEN'T BRICKED MY SYSTEM YET! ) PLEASE
BE AWARE THAT NO ONE ON THE INTERNET IS RESPONSIBLE FOR ANY DAMAGE TO YOUR
UNIT. ANY PROBLEMS WILL BE CONSIDERED ACTS OF WHATEVER GOD YOU BELIEVE IN.
======PELIGRO=======================================================
================================WARNING============================
===ACHTUNG=========================================================
For FYT SoM (5009/6011/6021/6022/6023) based JOYING / Intel SoFIA units ONLY!
Hello, here is a custom rom based on the SYU Stock Build [sofia3gr_car_64-userdebug 6.0.1 MMB29M eng.bsp.20180110.181524 release-keys]
Your Head Unit MUST ALREADY BE ROOTED! You must be able to obtain Super User access within Android!
Due to Bluetooth, WiFi, and as well as nvram patches in the ROM and bootloader, you must be running Joying 6.0 firmware dated 2017_12_15 or later to install this ROM.
Why this ROM? Simple answer: It's makes your Head Unit faster than running the stock ROM's, has updated Google Apps, and has the bloat removed! It's pre-rooted also!
INSTALLATION INSTRUCTIONS:
Step 1: Unzip the contents to the root of your USB flash drive on your computer, then plug the flash drive into the Joying unit via USB.
Step 2. Use the Android helper application "custom" to install. Download from link below, either on the Head Unit itself, OR on PC and transfer using ADB. Once installed, open the program, and grant superuser privileges when prompted, you'll be presented with screen as here:
![URL]](/proxy.php?image=http%3A%2F%2F%5BURL%5Dhttp%3A%2F%2Fmirrors.gtxlabs.com%2Fjoying%2F1_Firmware%2Fjoying_gtx%2Fcustom_4_6.png%5B%2FURL%5D&hash=98a476398fd5c82d425e750fb17521b1)
Step 3: Click INSTALL CUSTOM. Wait for output to say recovery successfully installed!
If you wish to preserve your /data, AKA dirty-flash, click on "Do not wipe data" at this point to prevent your data partition from being wiped.
ALL EXISTING DATA ON UNIT WILL BE ERASED. THIS IS A CLEAN INSTALLATION!
Step 4: click REBOOT TO INSTALL GTX ROM - Your Joying unit will reboot, and installation will automatically proceed through TWRP.
(NOTE! The ROM automatically re-installs stock recovery during installation, so if something goes wrong, you can always restore to the original JOYING firmware.)
Recovery options:
RESTORE STOCK - Restores the original stock recovery
INSTALL CUSTOM - Installs superdave's custom recovery (needed to install this ROM)
VERIFY RECOVERY - tells you which recovery you have installed
Rom Utilities:
(all options on this menu work only if you have custom recovery installed)
"Do Not Wipe Data" Switch - enable this to prevent your /data partition from being wiped when installing the ROM. (Your results may vary. Works for me!)
REBOOT TO TWRP - Reboots to TWRP home screen allowing you to do things
INSTALL GTX ROM- installs joying_gtx stock rom from installation media
Exit - exit custom
note, this is a test release intended for developer users only. no support other than this post is offered. A final version will follow soon once initial testing has been completed.Code:====Includes==== xposed v87 x86 open gapps x86 Nano Feb 2018 ViPER4ANDROID FX precompiled dalvik cache (first boot 2 minutes) enabled eth0 at boot at 192.168.65.100 for debugging ADB enabled SeSuperuser built-in Included [custom] app to manage superdavex's custom recovery for easy installation and maintenance RightCamera (front cam app) modified APK AOSP android boot animation Interactive cpu governor: go_highspeed_load set at 70% CPU load titanium backup nova launcher GVC CallHandler 4 Joying Amaze File Manager Xposed modules: boot manager gravitybox no overlay warning immsersive mode forcer app settings fake wifi GPSSpeedFix ======Removed====== [I]Debug Services:[/I] usbactive sqldebug pekallfmrserver watchdog ap_logfs apk_logfs log-watch crashlogd adbusbmuxd adbec bootwatcher shcmd fmd [I]Removed Apps: [/I] BasicDreams BluetoothMidiService Exchange2 Galaxy4 HoloSpiralWallpaper LiveWallpapers LiveWallpapersPicker NoiseField OpenWnn PhaseBeam PrintSpooler GooglePinyinIME RKUpdateService CaptivePortalLogin WAPPushManager [I]removed from /system-priv-app [/I]ManagedProvisioning CallLogBackup OemTelephonyApp DeviceTest StressTest WallpaperCropper GoogleFeedback ProxyHandler CellBroadcastReceiver [I]Removed FYT APPS[/I] ( these slow the system down considerably, even when not in use ) SYU-1-C9-Calculator-V1.0 Sofia-1-C9-TV-V1.0 JY-1-C9-Video-V1.0 JY-1-C9-TimeWeather-V1.0 SYU-1-FileManager-V1.0 SYU-1-C9-Update-V1.0 Sofia-1-C9-ExDvr-V1.0 SYU-1-C5009-DVR-V1.0 Sofia-1-C9-Gallery-V1.0 JY-1-C9-MUSIC-V1.0 ZBox
Download Links
Installer ( unzip, this will help you install the ROM on a STOCK, un-rooted Head Unit ) :
xxxxx Mod Edit
custom V4_9
xxxxxxx Mod Edit
source code
Firmware Download:
V9 ALPHA 3
xxxxxx Mod Edit12Q / A:
Q: Do I need to worry about what MCU version I have before I use your rom?
A: Maybe, GTX ROM doesn't touch the MCU, which shouldn't be re-flashed with each install anyway as it usually doesn't change. Whatever MCU version you have, this ROM will work for you, as long as you have an FYT based SoM unit. If you encounter errors, you might need to change the "ro.build.fytmanufacturer" property in /system/app/fyt.prop to match whatever your unit ORIGINALLY came with.
Q: I have a RK3066/RK3188/PX3/PX5 based head unit. Will this ROM work for me?
A: NO! This ROM ONLY works on FYT based head units. This means all Joying Intel units, as well as some from other brands.
Q: I like Live Wallpapers. How do I enable them?
A: Use the built in terminal. type su and hit enter. You now have root. then type in:
hit enter again, then reboot!Code:cp -R /system/vendor/oem/LiveWall* /system/app
Q: I don't want to use this ROM anymore, what do i do?
A: Use the helper application, custom, open the program, and click RESTORE STOCK. This will restore the STOCK RECOVERY. Go on Joying's website [link], download the firmware of your choice, and follow their instructions.
Q: Can I use google voice to make hands free calls?
A: You sure can. Use the "Voice Search" app to dial a number using your voice, once at the Google App screen, click on the hamburger menu, and then select GV CallHandler 4 Joying. Make sure your unit is set to a DPI of at least 161dpi or greater, and then clear data on the google app. After you reboot, you should be able to make calls.
Q: How do I view my front camera?
A: If you are using the analog RCA video input, on the back of the unit, you can use the RIGHT CAMERA app to view. Note, than unlike the AUX program, this one will NOT mute the system audio.
Q: How can I fix my GPS speed to calculate 1/kmh or 1/mph steps instead of the default 4 steps?
A: Go to XPOSED INSTALLER, and enable the GPSSpeedFix module. Reboot, and the steps will be fixed.
Q: How can I enable different DPI settings for each application?
A: Go to XPOSED INSTALLER, and enable the App Settings module. Exit the installer, and open the App Settings to make your adjustments. Reboot, and your changes will be visible.
Q: This ROM is fast, but I want more speed, what do I do?
A: Add a fan to your unit, preferably a FAN + Heatsink. Then download an app like SetCPU to lock your CPU to MAX speed. Be careful.
Q: How do I re-assign the hard keys on my unit? Joying says that DVD and EJECT don't work! Is this a lie?
A: Yes! There is a way to re-assign keys, and the DVD and EJECT keys do actually work, the software that comes with the unit is not very good. Check @surfer63's XSofiaTweaker thread for more info on how this works.
Q: I want to send and receive my text messages on my Joying unit...is this possible?
A: Sure! Use third party app like Pulse, or Pushbullet. Works like a charm. I personally use Pulse, it's got the look and feel of a stock SMS app.
Q: Installing the Joying Factory Rom takes like an hour...multiple reboots, then it starts over, then it reboots, then it optimizes apps, then it starts over, again. jeez. How long does your ROM take to install?
A: Installation is less than 4 minutes. First boot is timed at one minute 53 seconds, and there are no crashes or reboots. It just works.
Q: Xposed says there is an update available! Is it safe to update Xposed?
A: NO! Do NOT update Xposed, it will make your unit non-functional! Just say NO!
Q: Am I able to "upgrade" from an earlier version of the ROM to a newer without loosing my data and apps?
A: Yes, read the first post on what option to select in custom. Many others and I have tested, and it works for almost all people, still there is a chance that it could not work.
Q: I need to download the stock Joying firmware so I may use your ROM! Where do I get the latest updates?
A: See here: https://drive.google.com/open?id=1nF5Pgn95_WWGk8S2byb8rR5ko0ss5F_S
Q: is there a video where I can see you install the ROM?
A:8So with lots of testing, the GTX JY ROM will be moving to a v10 STABLE release very soon. v9 should be released within the next few days, with some V9 point releases in between for bug fixes. Thanks to everyone who has used, tested, broken, and is enjoying their head units! Please send lots of feedback to help move to V10 stable for more to enjoy.
