I really don't understand you. It is in post #1 and #2.
If you did not use the GTX-ROM, then with what did you try to flash your unit? And why do you use this thread?
Software Development [CLOSED] [ROM] [CUSTOM] [INTEL JOYING] GTX joying ROM V9a3 2018-04-22
- Thread starter gtxaspec
- Start date
- Status
If you did not use the GTX-ROM, then with what did you try to flash your unit? And why do you use this thread?
I think you hijacked this thread and therefore put me on the wrong foot.
Let's start again.
Did you try to flash a firmware?
Or did your unit just starting to do this "at some moment"?
Buy a new one.
It is so old that it even has a tattoo on its chest: "do not resuscitate"
Well in that case you might need to do a teardown and replace/upgrade the thermal paste on the processor. It sounds like these units suffer from heat issues so if you wish to revive it start with the hardware side.....clean the boards of dust etc and repaste the heatsink/processor.
Not only that. Those Sofia's were "cold soldered". The CPU and also other chips suffered from heat strain (hot-cold-hot-cold) and some of the soldering points break loose. That means that you might need to resolder as well.
it will heat it in the FYT6023 oven
still the same thing comes to this place and resets with a cold air cools
when i try to install another rom i get this message
ota package and app package must update same time
Last edited:
I will change the SD card from 16 to 8 maybe it will help
but why did it install once only after a while it reset
Last edited:
Did you make sure your usb-stick is correct? Did you really do a checkdisk or reformat to FAT32 on the usb-disk?
The newer firmwares check for correct CRC via the signed key. The old ones did not do this yet.
Last edited:
MOD ACTION:
Thread closed as abandoned and also since the software doesn't seem to work satisfactorily on the old hardware as is evident from the thread itself. The OP hasn't posted after Aug. 2022.
Thread closed as abandoned and also since the software doesn't seem to work satisfactorily on the old hardware as is evident from the thread itself. The OP hasn't posted after Aug. 2022.
- Status
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
51========================================ACHTUNG===================
=================WARNING==========================================
=====================================================PELIGRO=======
AS WITH ANY UNSUPPORTED SYSTEM MODIFICATIONS, USING THIS MAY LEAD TO A BRICK
IF YOU DON'T KNOW WHAT YOU ARE DOING ( HAVEN'T BRICKED MY SYSTEM YET! ) PLEASE
BE AWARE THAT NO ONE ON THE INTERNET IS RESPONSIBLE FOR ANY DAMAGE TO YOUR
UNIT. ANY PROBLEMS WILL BE CONSIDERED ACTS OF WHATEVER GOD YOU BELIEVE IN.
======PELIGRO=======================================================
================================WARNING============================
===ACHTUNG=========================================================
For FYT SoM (5009/6011/6021/6022/6023) based JOYING / Intel SoFIA units ONLY!
Hello, here is a custom rom based on the SYU Stock Build [sofia3gr_car_64-userdebug 6.0.1 MMB29M eng.bsp.20180110.181524 release-keys]
Your Head Unit MUST ALREADY BE ROOTED! You must be able to obtain Super User access within Android!
Due to Bluetooth, WiFi, and as well as nvram patches in the ROM and bootloader, you must be running Joying 6.0 firmware dated 2017_12_15 or later to install this ROM.
Why this ROM? Simple answer: It's makes your Head Unit faster than running the stock ROM's, has updated Google Apps, and has the bloat removed! It's pre-rooted also!
INSTALLATION INSTRUCTIONS:
Step 1: Unzip the contents to the root of your USB flash drive on your computer, then plug the flash drive into the Joying unit via USB.
Step 2. Use the Android helper application "custom" to install. Download from link below, either on the Head Unit itself, OR on PC and transfer using ADB. Once installed, open the program, and grant superuser privileges when prompted, you'll be presented with screen as here:
![URL]](/proxy.php?image=http%3A%2F%2F%5BURL%5Dhttp%3A%2F%2Fmirrors.gtxlabs.com%2Fjoying%2F1_Firmware%2Fjoying_gtx%2Fcustom_4_6.png%5B%2FURL%5D&hash=98a476398fd5c82d425e750fb17521b1)
Step 3: Click INSTALL CUSTOM. Wait for output to say recovery successfully installed!
If you wish to preserve your /data, AKA dirty-flash, click on "Do not wipe data" at this point to prevent your data partition from being wiped.
ALL EXISTING DATA ON UNIT WILL BE ERASED. THIS IS A CLEAN INSTALLATION!
Step 4: click REBOOT TO INSTALL GTX ROM - Your Joying unit will reboot, and installation will automatically proceed through TWRP.
(NOTE! The ROM automatically re-installs stock recovery during installation, so if something goes wrong, you can always restore to the original JOYING firmware.)
Recovery options:
RESTORE STOCK - Restores the original stock recovery
INSTALL CUSTOM - Installs superdave's custom recovery (needed to install this ROM)
VERIFY RECOVERY - tells you which recovery you have installed
Rom Utilities:
(all options on this menu work only if you have custom recovery installed)
"Do Not Wipe Data" Switch - enable this to prevent your /data partition from being wiped when installing the ROM. (Your results may vary. Works for me!)
REBOOT TO TWRP - Reboots to TWRP home screen allowing you to do things
INSTALL GTX ROM- installs joying_gtx stock rom from installation media
Exit - exit custom
note, this is a test release intended for developer users only. no support other than this post is offered. A final version will follow soon once initial testing has been completed.Code:====Includes==== xposed v87 x86 open gapps x86 Nano Feb 2018 ViPER4ANDROID FX precompiled dalvik cache (first boot 2 minutes) enabled eth0 at boot at 192.168.65.100 for debugging ADB enabled SeSuperuser built-in Included [custom] app to manage superdavex's custom recovery for easy installation and maintenance RightCamera (front cam app) modified APK AOSP android boot animation Interactive cpu governor: go_highspeed_load set at 70% CPU load titanium backup nova launcher GVC CallHandler 4 Joying Amaze File Manager Xposed modules: boot manager gravitybox no overlay warning immsersive mode forcer app settings fake wifi GPSSpeedFix ======Removed====== [I]Debug Services:[/I] usbactive sqldebug pekallfmrserver watchdog ap_logfs apk_logfs log-watch crashlogd adbusbmuxd adbec bootwatcher shcmd fmd [I]Removed Apps: [/I] BasicDreams BluetoothMidiService Exchange2 Galaxy4 HoloSpiralWallpaper LiveWallpapers LiveWallpapersPicker NoiseField OpenWnn PhaseBeam PrintSpooler GooglePinyinIME RKUpdateService CaptivePortalLogin WAPPushManager [I]removed from /system-priv-app [/I]ManagedProvisioning CallLogBackup OemTelephonyApp DeviceTest StressTest WallpaperCropper GoogleFeedback ProxyHandler CellBroadcastReceiver [I]Removed FYT APPS[/I] ( these slow the system down considerably, even when not in use ) SYU-1-C9-Calculator-V1.0 Sofia-1-C9-TV-V1.0 JY-1-C9-Video-V1.0 JY-1-C9-TimeWeather-V1.0 SYU-1-FileManager-V1.0 SYU-1-C9-Update-V1.0 Sofia-1-C9-ExDvr-V1.0 SYU-1-C5009-DVR-V1.0 Sofia-1-C9-Gallery-V1.0 JY-1-C9-MUSIC-V1.0 ZBox
Download Links
Installer ( unzip, this will help you install the ROM on a STOCK, un-rooted Head Unit ) :
xxxxx Mod Edit
custom V4_9
xxxxxxx Mod Edit
source code
Firmware Download:
V9 ALPHA 3
xxxxxx Mod Edit12Q / A:
Q: Do I need to worry about what MCU version I have before I use your rom?
A: Maybe, GTX ROM doesn't touch the MCU, which shouldn't be re-flashed with each install anyway as it usually doesn't change. Whatever MCU version you have, this ROM will work for you, as long as you have an FYT based SoM unit. If you encounter errors, you might need to change the "ro.build.fytmanufacturer" property in /system/app/fyt.prop to match whatever your unit ORIGINALLY came with.
Q: I have a RK3066/RK3188/PX3/PX5 based head unit. Will this ROM work for me?
A: NO! This ROM ONLY works on FYT based head units. This means all Joying Intel units, as well as some from other brands.
Q: I like Live Wallpapers. How do I enable them?
A: Use the built in terminal. type su and hit enter. You now have root. then type in:
hit enter again, then reboot!Code:cp -R /system/vendor/oem/LiveWall* /system/app
Q: I don't want to use this ROM anymore, what do i do?
A: Use the helper application, custom, open the program, and click RESTORE STOCK. This will restore the STOCK RECOVERY. Go on Joying's website [link], download the firmware of your choice, and follow their instructions.
Q: Can I use google voice to make hands free calls?
A: You sure can. Use the "Voice Search" app to dial a number using your voice, once at the Google App screen, click on the hamburger menu, and then select GV CallHandler 4 Joying. Make sure your unit is set to a DPI of at least 161dpi or greater, and then clear data on the google app. After you reboot, you should be able to make calls.
Q: How do I view my front camera?
A: If you are using the analog RCA video input, on the back of the unit, you can use the RIGHT CAMERA app to view. Note, than unlike the AUX program, this one will NOT mute the system audio.
Q: How can I fix my GPS speed to calculate 1/kmh or 1/mph steps instead of the default 4 steps?
A: Go to XPOSED INSTALLER, and enable the GPSSpeedFix module. Reboot, and the steps will be fixed.
Q: How can I enable different DPI settings for each application?
A: Go to XPOSED INSTALLER, and enable the App Settings module. Exit the installer, and open the App Settings to make your adjustments. Reboot, and your changes will be visible.
Q: This ROM is fast, but I want more speed, what do I do?
A: Add a fan to your unit, preferably a FAN + Heatsink. Then download an app like SetCPU to lock your CPU to MAX speed. Be careful.
Q: How do I re-assign the hard keys on my unit? Joying says that DVD and EJECT don't work! Is this a lie?
A: Yes! There is a way to re-assign keys, and the DVD and EJECT keys do actually work, the software that comes with the unit is not very good. Check @surfer63's XSofiaTweaker thread for more info on how this works.
Q: I want to send and receive my text messages on my Joying unit...is this possible?
A: Sure! Use third party app like Pulse, or Pushbullet. Works like a charm. I personally use Pulse, it's got the look and feel of a stock SMS app.
Q: Installing the Joying Factory Rom takes like an hour...multiple reboots, then it starts over, then it reboots, then it optimizes apps, then it starts over, again. jeez. How long does your ROM take to install?
A: Installation is less than 4 minutes. First boot is timed at one minute 53 seconds, and there are no crashes or reboots. It just works.
Q: Xposed says there is an update available! Is it safe to update Xposed?
A: NO! Do NOT update Xposed, it will make your unit non-functional! Just say NO!
Q: Am I able to "upgrade" from an earlier version of the ROM to a newer without loosing my data and apps?
A: Yes, read the first post on what option to select in custom. Many others and I have tested, and it works for almost all people, still there is a chance that it could not work.
Q: I need to download the stock Joying firmware so I may use your ROM! Where do I get the latest updates?
A: See here: https://drive.google.com/open?id=1nF5Pgn95_WWGk8S2byb8rR5ko0ss5F_S
Q: is there a video where I can see you install the ROM?
A:8So with lots of testing, the GTX JY ROM will be moving to a v10 STABLE release very soon. v9 should be released within the next few days, with some V9 point releases in between for bug fixes. Thanks to everyone who has used, tested, broken, and is enjoying their head units! Please send lots of feedback to help move to V10 stable for more to enjoy.
