[CLOSED][ROM][STABLE][N][7.0][AQF7][11.07.17][SM-G950F/FD/N] BatMan-Rom V1.1.1

[azztech30]

Hi,
Can I dirty flash this over v1.0.0 Batman-Rom?? this would save me doing the usual procedure back up etc if not I'll get on with a backup etc

 

[McHerold]

Anyone has problems with mounting?
Yesterday I have updated to the newest BatMan Rom with a clean flash.
Everything works fine so far, OTG works and all the mods, but actually I am not able to mount an ext4 partition, encrypted container via the EDS app or bind folders from the internal to the external SD card.
Neither by App2SD/FolderMount app nor by terminal or adb commands, the command succeeds and the mount is listet in /proc/mounts, but when I open the appropriate folder it's empty.

 

[Tkkg1994]

I did but it doesn't show (Do I have to choose a specific CSC ?)
Can you make it 4G/3G ??

In AUT csc it definitly works.
There is no csc or similar for 4G/3G sorry to tell :/

Hi,
Can I dirty flash this over v1.0.0 Batman-Rom?? this would save me doing the usual procedure back up etc if not I'll get on with a backup etc

Make a full backup in twrp and try it!
Should work in theory

 

[sielhadi]

good rom like supermanrom but it takes many ram and i didn't find bixby voice

Sent from my SM-G950F using XDA-Developers Legacy app

---------- Post added at 10:50 PM ---------- Previous post was at 10:44 PM ----------

It consumes a lot of ram

Sent from my SM-G950F using XDA-Developers Legacy app

 

[Leeum]

Hey mate thank you for the update. Just wandering if anyone else can send text messages while on a phone call. For some reason my texts won't get sent until i'm off the phone.

 

[Tkkg1994]

good rom like supermanrom but it takes many ram and i didn't find bixby voice

Sent from my SM-G950F using XDA-Developers Legacy app

---------- Post added at 10:50 PM ---------- Previous post was at 10:44 PM ----------

It consumes a lot of ram

Sent from my SM-G950F using XDA-Developers Legacy app

Bixby voice isn't enabled by samsung...

About ram; free ram = wasted ram!

Hey mate thank you for the update. Just wandering if anyone else can send text messages while on a phone call. For some reason my texts won't get sent until i'm off the phone.

Thanks man!
Are your calls made over 3G? Because I'm pretty sure that you can't send a sms at the same time as you call over 3G. Over 4G/VoLTE it should work though

Sent from my BatMan powered SM-G955F

 

[Leeum]

Bixby voice isn't enabled by samsung...

About ram; free ram = wasted ram!

Thanks man!
Are your calls made over 3G? Because I'm pretty sure that you can't send a sms at the same time as you call over 3G. Over 4G/VoLTE it should work though

Sent from my BatMan powered SM-G955F

It automatically connects to 3G while i am on a call. Any way to keep it on 4G?

 

[Tkkg1994]

It automatically connects to 3G while i am on a call. Any way to keep it on 4G?

Yes, having a carrier which supports VoLTE. I suggest to make some researches about it

 

[mikolol]

Hi, I have problems with Magisk v13.1. I can install but after I make reboot Magisk Manager stops recognizing root access. I've tried several times to reinstall Magisk via recovery, but unsuccessfuly. Anyone has similar problem?

And also Viper4Android is not working but I have not tried to find some workarounds yet.

 

[Tkkg1994]

Hi, I have problems with Magisk v13.1. I can install but after I make reboot Magisk Manager stops recognizing root access. I've tried several times to reinstall Magisk via recovery, but unsuccessfuly. Anyone has similar problem?

And also Viper4Android is not working but I have not tried to find some workarounds yet.

Both not related to something in my rom, my suggestion:

Write that in magisk thread here and on viper forums. Have fun and keep on rocking!

 

[TarekElsakka]

Can you do following: go to twrp, wipe, format data (a keyboard will pop up), with this keyboard write: "yes", swipe to wipe, reboot recovery, flash the rom. That will work

I was forced to do that when I installed TWRP using ODIN any ways, but it still didn't work. However after posting that, I decided to make another full wipe and install the ROM with different settings and again, Egypt CSC, but this time with Batman boot animation and splashscreen and it worked! Now it works flawlessly. Thanks for your help!

 

[McHerold]

Anyone has problems with mounting?
Yesterday I have updated to the newest BatMan Rom with a clean flash.
Everything works fine so far, OTG works and all the mods, but actually I am not able to mount an ext4 partition, encrypted container via the EDS app or bind folders from the internal to the external SD card.
Neither by App2SD/FolderMount app nor by terminal or adb commands, the command succeeds and the mount is listet in /proc/mounts, but when I open the appropriate folder it's empty.

Anyone?

 

[_BaTTi_]

Hi,
Can I dirty flash this over v1.0.0 Batman-Rom?? this would save me doing the usual procedure back up etc if not I'll get on with a backup etc

I have sucessfully dirty flashed batrom 1.1.1 over batstock 1.0.0 - no problems at all

Wysłane z mojego SM-G950F przy użyciu Tapatalka

 

[angelohb]

A logcat would help me alot, as I'm not going to waste 150 bucks for something I don't use

Good Morning!
I am having the same problem with BatMan 1.1.1
DEX only works with Stock System UI.
With the modified System UI, the system is prompted with the message "System UI stopped"
How do I generate a logcat for this error in the DEX system?
The error does not appear on the phone, it only appears on the monitor when it is connected to DEX.

 

[Tkkg1994]

I was forced to do that when I installed TWRP using ODIN any ways, but it still didn't work. However after posting that, I decided to make another full wipe and install the ROM with different settings and again, Egypt CSC, but this time with Batman boot animation and splashscreen and it worked! Now it works flawlessly. Thanks for your help!

As long as it works right now I'm very very happy to hear that!

Anyone?

Does this work on full stock? Because concerning this, nothing changed in the rom

I have sucessfully dirty flashed batrom 1.1.1 over batstock 1.0.0 - no problems at all

Wysłane z mojego SM-G950F przy użyciu Tapatalka

:highfive:

Good Morning!
I am having the same problem with BatMan 1.1.1
DEX only works with Stock System UI.
With the modified System UI, the system is prompted with the message "System UI stopped"
How do I generate a logcat for this error in the DEX system?
The error does not appear on the phone, it only appears on the monitor when it is connected to DEX.

connect it to a pc, adb logcat > log.txt during the connection on DEX. That may be very difficult. Otherwise you can simply reflash the rom with stock UI which will work for sure. As long as I don't know which mod is causing the mess I can't fix it

 

[McHerold]

As long as it works right now I'm very very happy to hear that!

Does this work on full stock? Because concerning this, nothing changed in the rom

:highfive:

connect it to a pc, adb logcat > log.txt during the connection on DEX. That may be very difficult. Otherwise you can simply reflash the rom with stock UI which will work for sure. As long as I don't know which mod is causing the mess I can't fix it

Yes, already tested, it works on full stock and BatMan Rom 1.0.0, do you have this issue?
DId a clean flash, wiped/formatted the complete phone (internal sotrage, data, caches).
Never had issues with App2SD Folder Mount before.

 

[gege0202]

What is the difference between 1.1.0 and 1.1.1?

 

[Tripledrop]

Hi, I have problems with Magisk v13.1. I can install but after I make reboot Magisk Manager stops recognizing root access. I've tried several times to reinstall Magisk via recovery, but unsuccessfuly. Anyone has similar problem?

And also Viper4Android is not working but I have not tried to find some workarounds yet.

Yep, exactly the same issue with Magisk... Works sometimes, mostly doesn't, but other root apps still seem to be ok

---------- Post added at 02:24 PM ---------- Previous post was at 02:22 PM ----------

Anyone?

I had similar issue... Randomly about a week ago, overnight, the phone just went into bootloop. Re-flashing ROM didn't help, and in the end I determined the partition was screwed. I used TWRP to repair the partition as EXT4 and re-installed Bat-Man 1.0.0 and all appeared good from there.

Little bit worrying it happened in the first place though, as happened overnight when not using phone, only charging.

---------- Post added at 02:25 PM ---------- Previous post was at 02:24 PM ----------

What is the difference between 1.1.0 and 1.1.1?

Have you checked the changelog on the first page?!!

 

[gege0202]

Have you checked the changelog on the first page?!!

and you, changelog 1.0.0 and 1.1.1!!?
my question 1.1.0 and 1.1.1!!!!!

 

[Tkkg1994]

Yes, already tested, it works on full stock and BatMan Rom 1.0.0, do you have this issue?
DId a clean flash, wiped/formatted the complete phone (internal sotrage, data, caches).
Never had issues with App2SD Folder Mount before.

Have you tried to install the rom with stock systemui and check if this makes any difference?

What is the difference between 1.1.0 and 1.1.1?

On the s8 nothing, that was just to go from beta to official release on xda