CM 14.1 - android 7.1 - Unofficial - for LeTV X800+ CN

[borg79]

I just ported the ROM from OnePlus Two with kernel from Flour Mo's LeEco 1 pro Cm 14.1 ROM initialy released in december 2016.

Does that mean oneplus 2's device tree and vendor blobs (from github) works for Le1 Pro too (I mean at least the built rom will be able to boot into normal screen) ?

 

[_or_75]

Does that mean oneplus 2's device tree and vendor blobs (from github) works for Le1 Pro too (I mean at least the built rom will be able to boot into normal screen) ?

In this kernel (oneplus2) there is nothing from this phone, and there will be little work, so you need to recompile it , OR

1) Take kernel from stock eui
2) Remake eui to LinageOS (truncated)
3) Profit ?

 

[borg79]

In this kernel (oneplus2) there is nothing from this phone, and there will be little work, so you need to recompile it , OR

1) Take kernel from stock eui
2) Remake eui to LinageOS (truncated)
3) Profit ?

Actually I try using the stock kernel source released by Leeco, but that source seems has outdated, require lots of modifications in order to be successfully complied. For device tree and Vendor blobs, I use Flour Mo's CM13 device tree. But even I successfully build a Lineage OS 14.1 rom, after I install it, at the first boot, it just get to the TWRP recovery screen. Since it never boot up, I have no way trace the error. The only thing I can do is to test the system.img in the emulator and that proves to work.

 

[ABM30]

Actually I try using the stock kernel source released by Leeco, but that source seems has outdated, require lots of modifications in order to be successfully complied. For device tree and Vendor blobs, I use Flour Mo's CM13 device tree. But even I successfully build a Lineage OS 14.1 rom, after I install it, at the first boot, it just get to the TWRP recovery screen. Since it never boot up, I have no way trace the error. The only thing I can do is to test the system.img in the emulator and that proves to work.

On Github I found also this: https://github.com/choyutou/android_kernel_leeco_msm8994
It can help?

 

[_or_75]

Does that mean oneplus 2's device tree and vendor blobs (from github) works for Le1 Pro too (I mean at least the built rom will be able to boot into normal screen) ?

On Github I found also this: github . com/choyutou/android_kernel_leeco_msm8994
It can help?

Kernel from Letv One Max

Look at here
1) Kernel github . com/Silentlys/android_kernel_letv_msm8994
2) Vendor github . com/Silentlys/android_vendor_letv_msm8994

For official port LineageOS send this -> wiki.lineageos . org/submitting_device.html

Maybe they will fix everything

 

[Heavyfam]

Double tap

I'm with a Chinese Le one pro, 64GB.
And double tap for unlock o lock is not working for me.
Or I can't find some special adjust. Think, that all adjusts is well, but some hidden maybe.
Any ideas?
Thanks.

 

[啦啦秘密]

Thank you for your appreciation. Unfortunately I am not really using Facebook, I prefer email in communications. But you can send me an email on private message section.
I am a bit busy in last period but I am trying to port newer Android 7.1.2 ROM for OnePlus 2 to our LeECO Pro 1 (Resurrection Remix, AICP, LineageOS). But every one has some major problem (on RR - developer option not showing up, On AICP Developer option OK but no sound in phone calls..but sound on music,...). Casting is working but tethering not (any ROM I try tethering is not working.......maybe is also some Kernel problem...and tethering is something that I need to. therefore in daily use I am working with my last Lineage 13 where everything is working just the IR blaster not). So still need work on it.
When I have an enough stable ROM I will post it for sure.
Any help is welcome.

tkank you

 

[borg79]

Kernel from Letv One Max

Look at here
1) Kernel github . com/Silentlys/android_kernel_letv_msm8994
2) Vendor github . com/Silentlys/android_vendor_letv_msm8994

For official port LineageOS send this -> wiki.lineageos . org/submitting_device.html

Maybe they will fix everything

Thanks for your information, I have already go through them but having no succeed !

 

[patkor]

Is there any chance to disable root to pass SafetyNet and run PoGo/Pay ? Ive tried install Magisk 13.3 after flashing newest version from first post, and some errors occured with boot img i think (Will try to install it again tomorrow).

 

[ABM30]

Is there any chance to disable root to pass SafetyNet and run PoGo/Pay ? Ive tried install Magisk 13.3 after flashing newest version from first post, and some errors occurred with boot img i think (Will try to install it again tomorrow).

Try to open ROM zip file (make a backup first!) with 7zip (just open not extract!) and delete root and busybox folder.
Close 7zip and try to flash the new ROM zip file. After flashing ROM zip flash Magisk 13.3 and clear cache+dalvik and reboot.
Share with us what happen!

 

[xenoveni]

Nice Rom

Very nice rom, thank you

 

[AllInOneByte]

Since I'm using this ROM the phone uses to heat so much while doing simple tasks, or playing light games. This is not a big problem for me, but I suppose every feedback is wlecome, right?

Sidepart, I've found several problems:

-As other user said, the volume gets muted when closing some apps or other sounds interfere, and then I have to press one volume button to update it and make the music sound again. I imagine it's an Android version problem, not the ROM.
-In the LED settings, nothing I do affects the actual behavior of the light. It keeps working the same way as if I didn't change anything.
-While using VR apps, the image goes down when I look up and up when I look down. Actually, I solved this problem by editing two values in the /system/etc/sensors/sensor_def_letvdev.conf, changing them to be the same as in the sensor_def_qcomdev.conf file that is inside the Gyro_files.zip. I can share the files corrected if you want.
-Sometimes, the 3G/LTE icon disappears from the status bar. At this point, if I open the notifications window, the icon is there, but I'm not able to use the Internet. It's like the phone recognises the SIM and not, at the same time. My solution is to reboot everytime it happens, but it's kinda frustrating.

 

[xenoveni]

Cannot unlock screen

sometimes i cannot unlock my screen, it stays black and does nothing when i press the button. Only way i found was to connect the charger and then it unlocks. Any idea why this is happening? i am using the latest version of cm 14.1 (february) on letv x800 cn

 

[ABM30]

---NEW BUILD: RESURECTION REMIX by nicesoni_ash 5.8.4. [7.1.2] PORTED FROM ONEPLUS 2

NEW BUILD ON PAGE 1
---RESURECTION REMIX by nicesoni_ash 5.8.4. [7.1.2] PORTED by me FROM ONEPLUS 2 ---

 

[msgar]

NEW BUILD ON PAGE 1
---RESURECTION REMIX by nicesoni_ash 5.8.4. [7.1.2] PORTED by me FROM ONEPLUS 2 ---

Any chance to port this rom for US model?

Great work you are doing! Thank you!

 

[ABM30]

Any chance to port this rom for US model?

Great work you are doing! Thank you!

Unfortunately, just if I can get somehow another kernel, for Android 7.

 

[msgar]

Unfortunately, just if I can get somehow another kernel, for Android 7.

Thanks for trying! ?

 

[266APP]

Thank you very much!
Thank you very much!
Thank you very much!
I thank you on behalf of all Chinese LE1pro users.
I want to donate you.Alipay or Paypal.

 

[natalleos]

Camera Bug

in Resurection Remix 5.8.4.[7.1.2] by nicesoni_ash i set CAMERA 2 API and USE ALTERNATIVE FLASH METHOD . I have still bug , picture's have large blocks close edges . But rom workin nice , Good job ABM30

 

[psykoking]

Aug 14. ROM

Hey ABM30,
wanted to give you a quick review for your latest ROM. I installed it on my x900+ and it worked after my second try installing it.
After installing the phone ran quite hot ( CPU ~47°C) but i got that under control after rooting and using LSpeed.
I also flashed GreyLeshy's zip to add vulkan support on SD810 devices.
Standard camera app also works out of the box, both camera sensors are being recognized. Only downside I came across so far is when taking a picture, the picture will be saved but after that it remains on the screen and the camera app crashes.
Open Camera on the other hand works great, no issues so far.
Wifi works without problems as well as Bluetooth.
Fingerprint and NFC are missing as expected.
So far so good, thank you very much for your work. :good: