CM 14.1 - android 7.1 - Unofficial - for LeTV X800+ CN

[natalleos]

Propably solution for camera bug(large bricks at edges of pix) https://forum.xda-developers.com/android/apps-games/piximod-camera-mod-devices-kk-lp-mm-n-t3401517 i testing now is not bad i try with RR Mark -IV mod . My camera got second life

 

[123Bart]

@ABM30:

Regarding Crisbals kernels for US-Model, I checked his posts at leeco.re. You can see his screenshots there regarding kernels. Maybe you already checked it before .

One was MIUI, other one was from his EUI 18S for US
Both have the "no sound issue".
(I can not post the links, because I have less than 10 posts yet)

Kernel version is 3.10.84-perf-gf8947f0 (for both)

 

[ABM30]

@ABM30:

Regarding Crisbals kernels for US-Model, I checked his posts at leeco.re. You can see his screenshots there regarding kernels. Maybe you already checked it before .

One was MIUI, other one was from his EUI 18S for US
Both have the "no sound issue".
(I can not post the links, because I have less than 10 posts yet)

Kernel version is 3.10.84-perf-gf8947f0 (for both)

Thank you.
Meantime I have learnt how to extract kernel config from kernels and I have compared them.
I allready compiled a kernel also for US ROM.
In weekend I will post the new US ROM based on it.

I also solved the tethering problem for CN version (for US to be tested), so in weekend will be new toys for you !:fingers-crossed:

 

[eternality.pl]

Astonishing news ABM30!

Will you include hifi option in your rom please? Like in original leeco eui - so that we can utilize the ess dac for audio?
And what about gps? Will it work?

Anyway, amaizng work! Much appreciated!

 

[ABM30]

Astonishing news ABM30!

Will you include hifi option in your rom please? Like in original leeco eui - so that we can utilize the ess dac for audio?
And what about gps? Will it work?

Anyway, amaizng work! Much appreciated!

For hi-fi option: maybe a bit later, it is not so easy. Sincerely I am more than satisfied with Dolby sound quality at this moment.
For GPS: download the GPSTest, go to Settings-AGPS-Clear and Update and try in this way. Try also STOP a bit and RESTART the gps from location settings.

AND.....YES!!!! NEW ROM ON FIRST PAGE........TETHERING WORKS!

 

[teorouge]

Thanks, is it US compatible?

Inviato dal mio LeTv 1 Pro utilizzando Tapatalk

 

[Mhamed32]

Hello, FingerPrint Working with X900 ?

 

[ABM30]

Thanks, is it US compatible?

Inviato dal mio LeTv 1 Pro utilizzando Tapatalk

For US test ROM a bit more ours, now I am recompiling the kernel again, at least tomorrow will be UP.
The kernel is based on original config taken from 5.5.11s US version, with some improvements. Build on Flou_Mo's sourcecod.
I hope it will boot.

 

[ABM30]

Hello, FingerPrint Working with X900 ?

For the moment the ROM posted is for X800 CN variant.
But after I finish also the US ROM I will try to add also finger print and nfc and buid a kernel and ROM for X900 Max 1.
A bit patience and it will come. Till then is good if you can try out the x800CN variant and see if camera is working, wifi, BT, tethering on X900.
Good luck! :fingers-crossed:

 

[ABM30]

:good::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:

X800_RR584_US_wlan_ABM30_9sep17-01.zip IS ALLREADY ON FIRST PAGE!!! Finger crossed on testing!
Finaly the WIFI module has built without errors so lets try out the results.
JUST REMEMBER IF YOU WANT TO TRY OUT US ROM VARIANT:

I can not test it so all responsability is on you (even is not booting, worst thing that can happen is to get in blue led blank screen. Normaly you can get back to RECOVERY pressing vol up+power. BUT BACKUP< BACKUP< BACKUP before is a good idea to
If we get luck and it boot up then I have a good chance to solve sound and charging bug (when it not already solved!) that was before in other custom US ROMs

 

[123Bart]

:good::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:

X800_RR584_US_wlan_ABM30_9sep17-01.zip IS ALLREADY ON FIRST PAGE!!! Finger crossed on testing!
Finaly the WIFI module has built without errors so lets try out the results.
JUST REMEMBER IF YOU WANT TO TRY OUT US ROM VARIANT:

I can not test it so all responsability is on you (even is not booting, worst thing that can happen is to get in blue led blank screen. Normaly you can get back to RECOVERY pressing vol up+power. BUT BACKUP< BACKUP< BACKUP before is a good idea to
If we get luck and it boot up then I have a good chance to solve sound and charging bug (when it not already solved!) that was before in other custom US ROMs

@ABM30: Le1Pro US

I tried it .

Flash procedure was without error message,
device did not boot through within 10 Minutes. Stucked in LeEco "Breaking boundaries fro freedom"
second boot stucked in LeEco "Superpowered by Ecosystem"
third boot stucked in LeEco "I am not a phone blablabla"

Went back to TWRP and tried to restore my backup of CM12.1, but device is not booting anymore. same as above
At least TWRP is still accessible. ( Need some help I think)

Edit: could flash and boot successfully my initial clean backup (EUI Stock-ROM 11S) from first TWRP. Phone is still alive, but later backups can not boot as already written above.
Also CM14.1 flash over clean Stock-ROM is not booting.

 

[Credomo]

Testing on X800+ CN

Install ok! Well done ABM30!
I'm testing this ROM and I will update this post. I previously tested all ABM30 ROMS on X800+ CN.

Additionnal packages to be installed from recovery:

• Take care, there is no google apps! Go to http://opengapps.org/ and install from recovery one packages for ARM64 / Android 7.1
• Root : Install from recovery Magisk from https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445. SuperSU works fine too : http://www.supersu.com/download

Software / System :

• There is 2 launchers, Nova and a new one, Lawchair. I've tested Lawchair. It's a great one. A lot of simple parameters to match our use.
• Titanium Backup is embeded. But I had problem with it, couldn't read my backup and couldn't update the app. I had to remove it with /system/app mover app. Reinstall and now it's ok. Maybe you could remove Titanium Backup from this Build?
• Tethering is ok ! Well done !
• GPS seems to have problems. Tested on a car and during a walk. The signal is week and it takes a long time to have the position. Latest test outside (walking in a street) : 3 GPS + 3 GLONAS after 5 min. To fix the GPS according to your country follow these steps : https://forum.xda-developers.com/showpost.php?p=73849995&postcount=432
• The BlueGold Sidebar configuration request is always visible in the notifications. You can't remove this request except you disable the app in it's config panel. But after that impossible to have it back. The launchers are really good and full of options. Is the BlueGold Sidebarbar useful in this Build?
• Bluetooth: Unable to put it on
• Camera: Ok but I had some crash.
• Cell phone: Ok
• Wifi: Ok
• IR remote: Ok

To be tested: Battery management

 

[RoyalCasino]

@ABM30:

I tried it .

Flash procedure was without error message,
device did not boot through within 10 Minutes. Stucked in LeEco "Breaking boundaries fro freedom"
second boot stucked in LeEco "Superpowered by Ecosystem"
third boot stucked in LeEco "I am not a phone blablabla"

Went back to TWRP and tried to restore my backup of CM12.1, but device is not booting anymore. same as above
At least TWRP is still accessible. ( Need some help I think)

Did you wipe all partitions before flashing a new android system on the phone?

@ABM30 first of all thanks for u great work,WiFi seems working better too. But I do have huge overheating on my phone, even doing simple operation. Am I the only one?

Inviato dal mio MI 5 utilizzando Tapatalk

 

[123Bart]

Yes I wiped dalvik, cache, system and data.

Also please check my "Edit" in my last post two posts above.

 

[ABM30]

Install ok! Well done ABM30!
I'm just starting with this ROM (previously tested all ABM30 ROMS on X800+ CN).
There is 2 launchers, Nova and a new one. I'm testing them.
Take care, there is no google apps ! Where can I get them ?
I'm going to update this post to give you some informations. Cross finger for the tethering !

Yes, sorry, I forget to mention: for Google app: I am using Open Gapps nano, Arm 64, android 7.1.
Instal it right after new ROM.
Can be downloaded from http://opengapps.org/
For root you can use magisk 1.3.3, use google play for it.

 

[RoyalCasino]

Install ok! Well done ABM30!
I'm just starting with this ROM (previously tested all ABM30 ROMS on X800+ CN).
There is 2 launchers, Nova and a new one. I'm testing them.
Take care, there is no google apps ! Where can I get them ?
I'm going to update this post to give you some informations. Cross finger for the tethering !

For Google play:
www. Opengapps. Org
Choose--> arm 64 --> android 7.1----> nano gapps

Inviato dal mio MI 5 utilizzando Tapatalk

 

[ABM30]

@ABM30: Le1Pro US

I tried it .

Flash procedure was without error message,
device did not boot through within 10 Minutes. Stucked in LeEco "Breaking boundaries fro freedom"
second boot stucked in LeEco "Superpowered by Ecosystem"
third boot stucked in LeEco "I am not a phone blablabla"

Went back to TWRP and tried to restore my backup of CM12.1, but device is not booting anymore. same as above
At least TWRP is still accessible. ( Need some help I think)

Edit: could flash and boot successfully my initial clean backup (EUI Stock-ROM 11S) from first TWRP. Phone is still alive, but later backups can not boot as already written above.
Also CM14.1 flash over clean Stock-ROM is not booting.

Thank you for trying opt.
I made some changes it boot image, let try out: http://www.mediafire.com/file/6btfaw93he4a2ia/X800_RR584_US_wlan_ABM30_9sep17-02mod.zip

AND DON'T FORGET: WIPE CACHE, DALVICK, SYSTEM, DATA before flashing (leave just internal storage unwiped!)
GOOD LUCK: :fingers-crossed:

 

[ABM30]

Did you wipe all partitions before flashing a new android system on the phone?

@ABM30 first of all thanks for u great work,WiFi seems working better too. But I do have huge overheating on my phone, even doing simple operation. Am I the only one?

Inviato dal mio MI 5 utilizzando Tapatalk

Yes, during flash procedure it will heat up a bit more. But afterwards I didn't feel more than usual.
But let test it a bit more and if it drain to quick I will lock for kernel power changes....

FOR X900 USERS: a few days more, and I will try also a new kernel and ROM, with Fingerprint and NFC, for you also!. A don't have to much spare time but it will come!

 

[123Bart]

Thank you for trying opt.
I made some changes it boot image, let try out: http://www.mediafire.com/file/6btfaw93he4a2ia/X800_RR584_US_wlan_ABM30_9sep17-02mod.zip

AND DON'T FORGET: WIPE CACHE, DALVICK, SYSTEM, DATA before flashing (leave just internal storage unwiped!)
GOOD LUCK: :fingers-crossed:

OK, I tried again: No boot yet

For very short time LeEco boot screen, then jump immediately to penguin and boot loop "LeEco/penguin/LeEco/penguin....."

Keep going abm30 :good:
as long as my Le1Pro is not hard bricked I can try

 

[ABM30]

OK, I tried again: No boot yet

For very short time LeEco boot screen, then jump immediately to penguin and boot loop "LeEco/penguin/LeEco/penguin....."

Keep going abm30 :good:
as long as my Le1Pro is not hard bricked I can try

Here are 2 more boot images:
1. http://www.mediafire.com/file/l3a3af1d1ghq33f/boot-US-withdt.img
2. http://www.mediafire.com/file/76rjw7g0t2ymdjy/boot-US-nodt.img
Try the folowing:
1. Open(not extract!) the ROM with 7zip
2. delete the existing boot.img from ROM
3. copy the new boot-US-width.img in ROM and rename it boot.img
4. close the ROM archaive
5. Proceed to install ROM with new boot image in it.
Repeat the procedure width the boot-US-nodt.img
Let me now what happened. GOOD LUCK! (in this way is more easy to do changes, less upload/download time needed)