[CM11][4.4.2][N9005][ROM][KERNEL v3.00-b3][MAR02] temasek's UNOFFICIAL Build - V50.1

Status
Not open for further replies.
Search This thread

temasek

Senior Member
Feb 2, 2010
23,624
85,271
Singapore
temasek's UNOFFICIAL CM11 BUILD


NOTE

This can be used on ANY bootloader.

This is an UNOFFICIAL build of CM11 ( CyanogenMod 11 ) for hltexx (N9005) and by NO means this is my ROM. I am just compiling from CM Source and 100% credits goes to TeamDouche, the device maintainers of NOTE 3 -> Shareef Ali,Tony Layher, Drew Suarez and all other coders who contributed to CyanogenMod.

This is similar to a nightly from CM but has some extra goodies baked in. If you can't handle some things possible being broken, please don't use this and then complain to me for building it.


DISCLAIMER
Code:
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
 */

Remember to VOTE this thread if you like it.


iG8B7ZZRLZ5al.png



  • Do NOT expect daily builds. I'll build when I'm free.
  • Do NOT ask for support in this thread.
  • Do NOT use this unofficial build and ask for support at the official threads.
  • Do NOT be rude.
  • Respect all users
  • If u see a NOOB question and u don't feel like replying, DON'T, just ignore that post. If u do reply, good for u.....and be nice in your reply.


Latest official CWM recommended but not required.

Read this first -> CLICK ME

1st Time Installing
  • Download the zip
  • Download Gapps
  • WIPE DATA/FACTORY RESET
  • WIPE SYSTEM
  • Install the update zip from recovery
  • Install gapps
  • Reboot

Already installed CM11.0
  • Download the zip
  • Install the update zip from recovery
  • Reboot



  • WIP







MIRROR LINK:
Mega - By @elroy944


CREDITS

Shareef Ali,Tony Layher, Drew Suarez (cm maintainers of note 3)
SlimROM
OmniROM
AOKP
CarbonROM
ChameleonOS
ParanoidAndroid
DerTeufel
Faux123
Wootever
franciscofranco
PartimusPrime (bootanimation for temasek builds)
Cristiano Matos
SleepinDevil (his assistance to troubleshoot/fix bugs)
Vadonka (sponsor of temasek.hopto.org server)
powwow88 (creator of my custom cm10 bootanimation)
paour (contributor to github sources)
All other coders for making CM possible!


A donation to our note 3 cm maintainers to show your appreciation. Thanks!

iOuhg2EbgEMlw.jpg
 
Last edited:

triad88

Senior Member
Nov 17, 2007
233
50
Now I can stalk you.been stalking u from the samsung s3 from the early builds:p
 

Steve Lazarus

Senior Member
May 20, 2013
1,126
732
Port Orchard, WA
Don't ask for changelogs yet. Also point builds will never have changelogs.

V27 expected next week.

Point builds anytime.

Another note to myself. I hate writing changelogs :p

What launcher do you recommend for the current build? Just a follow up on my question in the other thread.. As you stated you don't use the stock launcher... Thanks in advance!

Sent from my SM-N9005 using XDA Premium 4 mobile app
 

LNKNPRKFN

Senior Member
Dec 16, 2010
318
51
BRAMPTON
excellent! your builds are running great on the hltecan SM-N900W8 Canadian note 3 m8 :good::good: glad to see this thread also :D

Im also a SM-N900W8 user, have you experienced any issues? or glitchez? everything work for you so far? How is the camera? i get FC on every rom i flashed on this phone...

THX in advanced...
 

turilo

Senior Member
Jun 17, 2007
3,531
1,563
Hamilton,Ont
Im also a SM-N900W8 user, have you experienced any issues? or glitchez? everything work for you so far? How is the camera? i get FC on every rom i flashed on this phone...

THX in advanced...

Everything runs perfect for me, no glitches, fc nada. There must be something you're probably not doing correctly perhaps? I always full wipe before in flash any rom

Sent from my SM-N900W8 using Tapatalk
 
  • Like
Reactions: LNKNPRKFN

LNKNPRKFN

Senior Member
Dec 16, 2010
318
51
BRAMPTON
Everything runs perfect for me, no glitches, fc nada. There must be something you're probably not doing correctly perhaps? I always full wipe before in flash any rom

Sent from my SM-N900W8 using Tapatalk

I always do a full wipe before flashing...Golden rule #2. Being #1 is NAND... :) ok looks like ima giver her a go!!!
 

temasek

Senior Member
Feb 2, 2010
23,624
85,271
Singapore
*** NOTICE ***

Pls note I've remove assert check since V26.2 and thus users able to flash my builds in other note 3 devices. Any idiot who flash my hltexx build on NON-note3 devices, I won't feel sorry for them.

Also pls note at this moment I am not sure any issues whatsoever in flashing my hltexx build onto other note 3 sister devices. If there are, I will feel sorry but pls do NOT blame me.

My build naming convention is basically towards my github sources across all my supported devices. Note 3 started with V26.1 was because my latest build release across my devices is V26.

I am supporting the following devices in ROM/Kernel thus my time is not exactly in my favour. Pls do understand if I don't reply your querries.

hltexx - ROM
i9300 - ROM + Kernel
tilapia - ROM
grouper - ROM


Regards
Temasek
 
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 206
    temasek's UNOFFICIAL CM11 BUILD


    NOTE

    This can be used on ANY bootloader.

    This is an UNOFFICIAL build of CM11 ( CyanogenMod 11 ) for hltexx (N9005) and by NO means this is my ROM. I am just compiling from CM Source and 100% credits goes to TeamDouche, the device maintainers of NOTE 3 -> Shareef Ali,Tony Layher, Drew Suarez and all other coders who contributed to CyanogenMod.

    This is similar to a nightly from CM but has some extra goodies baked in. If you can't handle some things possible being broken, please don't use this and then complain to me for building it.


    DISCLAIMER
    Code:
    /*
     * Your warranty is now void.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
     */

    Remember to VOTE this thread if you like it.


    iG8B7ZZRLZ5al.png



    • Do NOT expect daily builds. I'll build when I'm free.
    • Do NOT ask for support in this thread.
    • Do NOT use this unofficial build and ask for support at the official threads.
    • Do NOT be rude.
    • Respect all users
    • If u see a NOOB question and u don't feel like replying, DON'T, just ignore that post. If u do reply, good for u.....and be nice in your reply.


    Latest official CWM recommended but not required.

    Read this first -> CLICK ME

    1st Time Installing
    • Download the zip
    • Download Gapps
    • WIPE DATA/FACTORY RESET
    • WIPE SYSTEM
    • Install the update zip from recovery
    • Install gapps
    • Reboot

    Already installed CM11.0
    • Download the zip
    • Install the update zip from recovery
    • Reboot



    • WIP







    MIRROR LINK:
    Mega - By @elroy944


    CREDITS

    Shareef Ali,Tony Layher, Drew Suarez (cm maintainers of note 3)
    SlimROM
    OmniROM
    AOKP
    CarbonROM
    ChameleonOS
    ParanoidAndroid
    DerTeufel
    Faux123
    Wootever
    franciscofranco
    PartimusPrime (bootanimation for temasek builds)
    Cristiano Matos
    SleepinDevil (his assistance to troubleshoot/fix bugs)
    Vadonka (sponsor of temasek.hopto.org server)
    powwow88 (creator of my custom cm10 bootanimation)
    paour (contributor to github sources)
    All other coders for making CM possible!


    A donation to our note 3 cm maintainers to show your appreciation. Thanks!

    iOuhg2EbgEMlw.jpg
    62
    It's with regrets that I will temporary stop all builds for all my supported devices. I've hit a wall of hurdles and couldn't get out.

    Whether I will be back or not depends on how much energy I have left. Thank you for your past support and I hope to see u guys again soon.
    51
    Build V40
    md5sum: bf320816717aef16463b7f1041d10a81

    Major release.

    TRDS 3.0 Disabled + CM theme change = success

    TRDS 3.0 Enabled + CM theme change = success

    I'm taking a break off xda. This is my last for awhile.

    Till then, enjoy.


    Regards,
    temasek
    42
    Build V50

    hlte: md5sum: d5e72d095ef0a76f9ee3968a5223ffc6
    i9300: md5sum: TBA


    CHANGELOG SINCE V49

    • V50 comes with temasek kernel v2.04
    • Add "Change density on the fly" - SlimROM
      - Due to possibly my poor porting, I have to inject a SystemUI restart to complete it if not at times the statusbar doesn't get resized.
      - This density change WILL SURVIVE reboots & reflashing of ROMS
    • Add "Wakelock Blocker"
    • Add "Speed up booting on multicore devices."
      1. Add multithreading support to Installer/installd.
      2. Parallelize package scanning.
      3. Parallelize boot dexopt.
    • Add "Day and week on data usage"
      - Adds the ability to set day and week on when the data usage graph resets, instead of just month.
    • frameworks/base: Bluetooth: Add SDK apis for Wipower and Peripheral feature
      - changes needed for Wipower and Periferal features.
      - CRs-fixed: 587811
    • frameworks/base: Bluetooth: Handle exceptions for bluetoot socket read
      - Handled IO exception in read function of BluetootSocket, and also introduced a null check for mSocketIS.
      - CRs-Fixed: 605606
    • frameworks/base: Bluetooth: Add Power apply enable event handling
      - Add Wipower Power apply enable related event handling in frameworks
      - CRs-fixed: 612628
    • frameworks/base: Tethering: Skip link local addresses when enabling NAT
      - Only one entry is allowed to be added to route table 60 for all interface ipv6 link local addresses, so skip ipv6 link local addresses on all interfaces when enabling NAT
    • frameworks/base: Structure device not freed in error case …
      - In case of an error in the call usb_device_get_fd() the memory created by usb_open_device() is never freed.
      - Added a call to usb_device_close in case of error to release the allocated memory.
    • frameworks/base: Fixed a possible infinite loop in JsonReader#skipValue() …
      - Bug: https://code.google.com/p/android/issues/detail?id=65846
    • frameworks/base: Remove java.io.tmpdir assignment in AndroidRuntime. …
      - This value is overridden by the framework anyway (see ActivityThread.handleBindApplication). Besides, it doesn't seem like a great idea to let tools clutter /sdcard/ with temp files.
    • frameworks/base: EGL14.eglCreateWindowSurface should set producerControlledByApp …
      - Interface of Surface class changed. To reflect the change for EGL14, add producerControlledByApp flag. Similar change can be seen in 0fa257f
    • frameworks/base: Release locked buffer when it fails to acquire graphics buffer …
      - The JNI buffer in ImageReader_imageSetup is not released when it fails to acquire graphics buffer. After all JNI buffers are exhausted, ACQUIRE_MAX_IMAGES will be returned and leads to error. The JNI buffer should be released when it fails to acquire graphics buffer.
    • frameworks/base: Add 2 APIs (suspend/resume) in MediaPlayer …
      - API:suspend() will just pause the player and release all the decoders
      to replace release() which will release the whole player
      - API:resume() will just init the decoders again,
      then start() will be called to start to play the streaming
    • frameworks/base: VideoView: Implement the suspend/resume operation in VideoView …
      - To use the new APIs (suspend/resume) of MediaPlayer
      - Add a new status "SUSPENDED"
    • frameworks/base: MediaRecorder: Add pause interface …
      - add pause in java level
      - add pause in jni level
      - CRs-Fixed: 587051
    • frameworks/base: Revert "Added sahlnaskh arabic font and give it higher precedence than DroidNaskh"
    • frameworks/base: Revert "Added sahlnaskh arabic font to Android.mk & fonts.mk files to actually get the font installed"
    • frameworks/base: Revert "data usage cycle length"
    • hlte: Improve boot speed
      - Start with noop, finish with ROW. Similar to stock.
    • hlte: Add custom audio_effects.conf
      - Enable offload for visualizer
    • hlte: hlte: Enable SIM hotswap
      - Even though this isn't possible due to the battery location, it is possible for an invalid SIM to cause a persistent modal dialog to be presented upon boot. This works around it.
    • hlte: Add qcmediaplayer to the build
    • Updated CM Source - Lots of camera, bluetooth, av...commits.



    DOWNLOAD SITES

    temasek.hopto.org - i9300 / tilapia / grouper / hltexx
    Dev-Host i9300 / tilapia / grouper / hltexx
    AndroidFileHost - i9300 / hltexx
    MediaFire- i9300


    Later guys...

    Enjoy :)