• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!
  • Fill out your device list and let everyone know which phones you have!    Edit Your Device Inventory

[CM12][5.0.1][UNOFFICIAL][Multi-Variant Support][17/12/2014]

Search This thread

KDB223

Senior Member
Aug 15, 2013
525
212
I can confirm that the camera-not-saving photos bug is independent of SELinux mode.
It occurred to me even on Permissive.

P.S. Is there anyway I can remove the second sim icon from the status bar AND the lock screen?
persist.radio.multisim.config=
doesn't work. @MasterAwesome
 
Last edited:

<JohnCarter>

Senior Member
Jun 1, 2012
761
1,770
Ranchi
DUAL SIMs works flawlessly.. and the ROM is smooth as butter ;) :good:

But... :confused:

ISSUE-1 = the camera app freezes when capturing! tried several camera apps same issue still presents. so i tried donkey kernel for CM 12 so the camera issue is solved but the ROM started to lag as hell..

ISSUE-2 = There's no root access. I tried flashing SuperSU but no luck.

Please what should i do? any solution for above issues? Otherwise its a perfect ROM for a early build! :highfive:

Answer to your 2nd issue would be to go to
-about phone
-tap build no. Sec several times to enable developer options
-go back open developer options scroll down to root part and select root for both apps and adb.
that worked for me!!
 

MasterAwesome

Recognized Developer
Jun 23, 2013
2,017
3,985
I can confirm that the camera-not-saving photos bug is independent of SELinux mode.
It occurred to me even on Permissive.

P.S. Is there anyway I can remove the second sim icon from the status bar AND the lock screen?
persist.radio.multisim.config=
doesn't work. @MasterAwesome

Use terminal.

Code:
su
setprop persist.radio.multisim.config ""
 
  • Like
Reactions: KDB223

<JohnCarter>

Senior Member
Jun 1, 2012
761
1,770
Ranchi
Hey guys I'm getting a issue in both build 38 &39 , my mobile network doesn't work for almost all apps except google now and what'sapp. Browser and pkaystore give timeout issues. Tethering seems to work fine. Is it a gapps problem?
Ive clean installed via philz 6.58 and flashed the pico modular of gapps from op.
 
Last edited:

RoganJosh96

Member
Nov 5, 2013
9
1
Getting red edges on the screen after pressing on any app or anything on the home screen after a few reboots on 38... is that because of the bootloader??? any fix? thank you in advance! :D
 

MelihCaliskan

Senior Member
Feb 4, 2013
69
30
İstanbul
www.melihcaliskan.com
you flashed mine or yours ?

It works for me everytime though

---------- Post added at 11:27 PM ---------- Previous post was at 11:26 PM ----------

:eek: charge speed is too low via Datacable

76% became 73% after some time :silly:

I flashed mine (build 40)
now trying with yours.
---------------------------
Not working yours,too
 
Last edited:

Iamcp.singh

Member
Aug 23, 2014
8
0
how much time it takes on 1st boot. i waited for around 20 min and still the blue cyanogen was rotating. i did everything as instructed. one thing i missed was going to cm nighty and then flashing this ROM. Is it because of this. I was on stock when i flashed this. I have Moto g XT1033.
And thanks in advance
 

==vj==

Senior Member
Jan 19, 2013
1,078
1,033
Goa
how much time it takes on 1st boot. i waited for around 20 min and still the blue cyanogen was rotating. i did everything as instructed. one thing i missed was going to cm nighty and then flashing this ROM. Is it because of this. I was on stock when i flashed this. I have Moto g XT1033.
And thanks in advance
It takes 5-10 mins for first boot.
 

mightysween

Senior Member
Feb 18, 2011
1,553
1,289
Maine/USA
Moto G Stylus
What the heck... build 40 booted fine this morning from a full wipe now it won't. Wonder if there is a file in a persistent partition that CM12 needs that is different coming from stock than from CM11.

Well, this appears to be the case...here is the summary

Clean install VZW stock, then full wipe (data/davlik/cache/system)... install build 40 CM12 and it never gets past animation even with a reboot.

Back to recovery, full wipe and then restore CM11 nandroid, reboot to confirm working.

Back to recovery, full wipe (yes including system) and flash build 40 CM12...boots fine.

Duplicated this twice to make sure.



Sent from my DROID BIONIC using XDA Free mobile app
 

<JohnCarter>

Senior Member
Jun 1, 2012
761
1,770
Ranchi
how much time it takes on 1st boot. i waited for around 20 min and still the blue cyanogen was rotating. i did everything as instructed. one thing i missed was going to cm nighty and then flashing this ROM. Is it because of this. I was on stock when i flashed this. I have Moto g XT1033.
And thanks in advance

Try flashing through usb otg, worked for me. Approx first boot time is around 5-8 mins.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 112
    CyanogenMod 12 Lollipop
    cyanogenmod-12.jpg

    Code:
    Your warranty is now void.
    I am not responsible for bricked devices, dead SD cards,
    thermonuclear war, or you getting fired because the alarm app failed. Please
    do some research if you have any concerns about features included in this ROM
    before flashing it! YOU are choosing to make these modifications, and if
    you point the finger at me for messing up your device, I will laugh at you. 
    A lot.

    Introduction

    This build is made pretty much straight from cm sources mixed with commits from everywhere possible to try to address issues related to dual sim and add support for other variants as well.I've been posting my builds on alberto's thread till now and maintain this for a while so as to get some permenant fixes
    Features
    Working:
    • Calls
    • SMS
    • Audio
    • Bluetooth
    • WiFi
    • Mobile Data
    • GPS/Geolocation
    • FM Radio
    • Display
    • USB Tethering
    • MTP
    • Camera
    • MultiVariant build support(?)(testing)

    Not Working:
    • Hotspot WiFi
    • Dual Sim(?)
    • Who knows?

    INSTALLATION DETAILS

    -Requires Unlocked Bootloader & a custom recovery
    1) Place ROM & Gapps in your virtual SD
    2) Reboot in Bootloader Mode
    3) Go to "Recovery" (Vol -) and confirm (Vol +)
    4) Wipe Data/Factory Reset
    5) Wipe Dalvik cache
    6) Wipe/Format system (Just to be sure )
    7) Install the ROM zip
    8) Install the Gapps zip
    9) Reboot



    Downloads
    ROM
    Build Date:13-12-2014
    GAPPS
    Check this page for gapps Package

    Credits:
    To anyone testing my buids.

    SOURCES
    shall be up soon my build environment is messed up

    XDA:DevDB Information
    CM12 Multi Device buils, ROM for the Moto G

    Contributors
    bharat_goku, bharat_goku, deeplyyoung,pico hackr,
    ROM OS Version: 5.0.x Lollipop
    ROM Kernel: Linux 3.4.x
    ROM Firmware Required: Unlocked bootloader & custom recovery
    Based On: CM

    Version Information
    Status: Nightly
    Current Stable Version: Build 42 Onwards
    Stable Release Date: 2014-12-31
    Current Beta Version: All builds before bu
    Beta Release Date: 2014-12-14

    Created 2014-12-13
    Last Updated 2016-01-17
    13
    A little update I have bought a new system it'll take me a day or 2 to setup next build in the new year! Wishing everyone a happy new year :)
    10
    Good news cm seems to have merged all my changes ,should fix dual sim in today's or tomorrow's nightly now I think I'll focus on CDMA ,
    9
    I'll make a new build a little later head is slightly clogged now for ideas,I've implemented most possibilities but not sure where i'm going wrong need to sort it out before i start a new build
    7
    why general section?

    For now till i'm sure i've fixed multi variant support