• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

CM13 huawei P8 to honor 7 [DISCONTINUED]

Search This thread

Speedo.thc

Senior Member
Jun 7, 2013
1,272
1,472
Paris
Hi everybody , this is alpha beta built port of the CM13 P8 rom from @nexolight to Honor 7 device
https://forum.xda-developers.com/hu...-huawei-p8-unofficial-cyanogenmod-13-t3451457

Bugs :
Signal isn't correctly reported but is as fast as it should be. (When you usually have 2 bars and 0 bars are reported you still have 2 bars in practice...)
USB_Tethering doesn't work yet Fixed :good:
Brightness Fixed :good:
Choice LTE 3G 2G Fixed :good:
GPS Fixed :good: (take less of 20 second to see sat)
Camera Fixed : video don't work , ZOOM is OK
Video recording ( Footej Camera ) : works fine in beta 02
FingerPrint : Fixed :good:
sometime apps crash :good: fixed
2nd sim card :rolleyes: some job to do
IR blaster: :p
maybe others .. :confused:

Downloads is for "Dev preview"
Just to make it clear I'm not responsible for whatever damage this could possibly cause to your device. I provide those builds because the community would like to have them.
Don't expect much support from my side until the the ROM is fully functional.

About question you will ask :
1 : it is NOT CM13 papsi rom modified
2: i will NOT work on Papsi rom/kernel coz i'am a Donator and i WANT to RESPECT papsi rules
3 : i cannot build myself (small computer and knowedge)
4 : i do this coz it's funny as well
5 : if i see here any papsi bashing i will be VERY angry

What i fixed myself :
WiFi (P8 drivers don't work on H7)
Bluethooth (P8 drivers don't work on H7)
SD card (with some credits to Paulfasola)
MTP/PTP/adb (with some credits to Surdu Pedru)
Switch LTE 3G 2G
USB tethering
Brightness control
FingerPrint
Apps Crash
Video record with Footej camera app

- All credits/thanks are for @nexolight : if she don't start, i can't follow
- Thx to theses Devs :
=> Meticulus <=
=> Xepeleato <=
=> Surdu Pedru <=
=> papsi177[/MENTION] : i now use the kernel from free CM rom


as it is for developement only : it's full rooted , permissive and adb enabled (dangerous for daily usage)
use the last opengapps only: http://opengapps.org/
choice Arm64,android 6,pico

REQUIREMENT :
As usual need to be Unlock Bootloader and on a MM rom (android v6.0)
You can use the stock MM B380 full, flashable with TWRP v3.0
https://drive.google.com/file/d/0B3kJoB8n78hZMzFweENJN1kyQk0/view?usp=sharing
B380 will remove TWRP recovery and NOT allow you to start bootloader with buttons, so do like that:
1: keep a copy of TWRP3.0.img on your SD card , flash the B380 stock ..
2: DO NOT REBOOT , stay on TWRP and choice Install Image , then flash TWRP to recovery again

Changelogs :
Beta 03 (2017_03_06)
- Small improvement
- Switch governor (aroma)
- Cleanings unused files
Beta 02 ( 2017_03_02 )
- Add Working FingerPrint
- Add Working Video record app ( Footej )
- Fix Apps Crashes
- Set "ondemand" as default Governor
Beta 01 ( 2017_02_20 ) with Aroma Installer
Add Fingerprint 3rdpartApp : control some action .. ( aroma choice )
Add SmartWake+lock : very better than any dt2wake/fingerprint unlock but dry battery .. ( aroma choice )
Change camera2 CM13 for Camera2 AOSP ( better pictures color etc.. )

Downloads are available here so :
DO NOT MIRROR MY LINKS WITHOUT PERMISSION
rom beta 02 :http://www.mediafire.com/file/lme35ag9qdk1g1q/CM13_P8_to_H7_beta02_byWBT.zip
Counter is at 3550 downloads after only 3 days ... :cool:
Update to beta 03 + Set governor :http://www.mediafire.com/file/r9hfoziuxwk9zll/CM_P8_to_H7_beta03_Updater.zip

For peoples who like Scores :
AntutuScore_zpsumytm76l.jpg
 
Last edited:

ASMstudent

Senior Member
Aug 28, 2015
330
87
I have debranded chinese model that didn't have sound working with papsi ROM but worked with all european stock roms should I give it a try?

Sent from my PLK-L01 using Tapatalk
 

samcro94

Senior Member
Aug 16, 2014
256
92
PARIS
Hello Uncle Speedo,

I understand now why i don't see you any more !
Glad to see you'r still alive !
As i need gps and camera i'll wait a little to give it a try
be sure i'll follow this thread...

JC
 

Speedo.thc

Senior Member
Jun 7, 2013
1,272
1,472
Paris
Salut JC, yes, depuis maintenant 3 mois je passe mon peu de "temps libre" a ce projet, tout en essayant de rester très correct vis a vis des différents partis, en espérant que cela aboutisse a quelque chose de bien, (quand j'ai besoin de GPS, je flash ma CM style .. Qui a aussi fait l'objet de beaucoup de recherche. Des bisous :laugh:
 

EinBier

Senior Member
Jan 3, 2016
190
53
Salut JC, yes, depuis maintenant 3 mois je passe mon peu de "temps libre" a ce projet, tout en essayant de rester très correct vis a vis des différents partis, en espérant que cela aboutisse a quelque chose de bien, (quand j'ai besoin de GPS, je flash ma CM style .. Qui a aussi fait l'objet de beaucoup de recherche. Des bisous :laugh:

Je ne comprends pas beaucoup :D

Great work man! Thanks to you there's still hope for us!

Keep going up! :good::fingers-crossed:
 

SkilesAwaRz

Senior Member
Jan 24, 2016
206
41
Bon courage dans cette grande et dure tâche, je suivrai ta progression ;)

Good luck for this hard task, I'll follow closely your progression !

Envoyé de mon PLK en utilisant Tapatalk
 

ASMstudent

Senior Member
Aug 28, 2015
330
87
Working fine except for the reported bugs
Charging feels faster but battery life isn't consistent.

Sent from my HUAWEI GRA-L09 using Tapatalk
 

ASMstudent

Senior Member
Aug 28, 2015
330
87
Any WhatsApp Google Play Bug?
Just random crushes from time to time

Sent from my HUAWEI GRA-L09 using Tapatalk

---------- Post added at 04:06 AM ---------- Previous post was at 03:54 AM ----------

Battery life changed dramatically after changing CPU governor of the big cores into conservative instead of performance.
Battery life now is incomparably better than stock.

Edit: some inconsistencies still exist
Edit 2 : does it support fingerprint sensor because I can't find it anywhere?!!
The most annoying bug for me is the frequent app crashes as I don't use camera that often .

Sent from my HUAWEI GRA-L09 using Tapatalk
 
Last edited:
  • Like
Reactions: SkilesAwaRz

Speedo.thc

Senior Member
Jun 7, 2013
1,272
1,472
Paris
Just random crushes from time to time

Sent from my HUAWEI GRA-L09 using Tapatalk

---------- Post added at 04:06 AM ---------- Previous post was at 03:54 AM ----------

Battery life changed dramatically after changing CPU governor of the big cores into conservative instead of performance.
Battery life now is incomparably better than stock.

Edit: some inconsistencies still exist
Edit 2 : does it support fingerprint sensor because I can't find it anywhere?!!
The most annoying bug for me is the frequent app crashes as I don't use camera that often .

Sent from my HUAWEI GRA-L09 using Tapatalk

Hi , fixed somethings today , just flash the fix !!!
i will look at fingerprint ..
 

Top Liked Posts

  • There are no posts matching your filters.
  • 20
    Hi everybody , this is alpha beta built port of the CM13 P8 rom from @nexolight to Honor 7 device
    https://forum.xda-developers.com/hu...-huawei-p8-unofficial-cyanogenmod-13-t3451457

    Bugs :
    Signal isn't correctly reported but is as fast as it should be. (When you usually have 2 bars and 0 bars are reported you still have 2 bars in practice...)
    USB_Tethering doesn't work yet Fixed :good:
    Brightness Fixed :good:
    Choice LTE 3G 2G Fixed :good:
    GPS Fixed :good: (take less of 20 second to see sat)
    Camera Fixed : video don't work , ZOOM is OK
    Video recording ( Footej Camera ) : works fine in beta 02
    FingerPrint : Fixed :good:
    sometime apps crash :good: fixed
    2nd sim card :rolleyes: some job to do
    IR blaster: :p
    maybe others .. :confused:

    Downloads is for "Dev preview"
    Just to make it clear I'm not responsible for whatever damage this could possibly cause to your device. I provide those builds because the community would like to have them.
    Don't expect much support from my side until the the ROM is fully functional.

    About question you will ask :
    1 : it is NOT CM13 papsi rom modified
    2: i will NOT work on Papsi rom/kernel coz i'am a Donator and i WANT to RESPECT papsi rules
    3 : i cannot build myself (small computer and knowedge)
    4 : i do this coz it's funny as well
    5 : if i see here any papsi bashing i will be VERY angry

    What i fixed myself :
    WiFi (P8 drivers don't work on H7)
    Bluethooth (P8 drivers don't work on H7)
    SD card (with some credits to Paulfasola)
    MTP/PTP/adb (with some credits to Surdu Pedru)
    Switch LTE 3G 2G
    USB tethering
    Brightness control
    FingerPrint
    Apps Crash
    Video record with Footej camera app

    - All credits/thanks are for @nexolight : if she don't start, i can't follow
    - Thx to theses Devs :
    => Meticulus <=
    => Xepeleato <=
    => Surdu Pedru <=
    => papsi177[/MENTION] : i now use the kernel from free CM rom


    as it is for developement only : it's full rooted , permissive and adb enabled (dangerous for daily usage)
    use the last opengapps only: http://opengapps.org/
    choice Arm64,android 6,pico

    REQUIREMENT :
    As usual need to be Unlock Bootloader and on a MM rom (android v6.0)
    You can use the stock MM B380 full, flashable with TWRP v3.0
    https://drive.google.com/file/d/0B3kJoB8n78hZMzFweENJN1kyQk0/view?usp=sharing
    B380 will remove TWRP recovery and NOT allow you to start bootloader with buttons, so do like that:
    1: keep a copy of TWRP3.0.img on your SD card , flash the B380 stock ..
    2: DO NOT REBOOT , stay on TWRP and choice Install Image , then flash TWRP to recovery again

    Changelogs :
    Beta 03 (2017_03_06)
    - Small improvement
    - Switch governor (aroma)
    - Cleanings unused files
    Beta 02 ( 2017_03_02 )
    - Add Working FingerPrint
    - Add Working Video record app ( Footej )
    - Fix Apps Crashes
    - Set "ondemand" as default Governor
    Beta 01 ( 2017_02_20 ) with Aroma Installer
    Add Fingerprint 3rdpartApp : control some action .. ( aroma choice )
    Add SmartWake+lock : very better than any dt2wake/fingerprint unlock but dry battery .. ( aroma choice )
    Change camera2 CM13 for Camera2 AOSP ( better pictures color etc.. )

    Downloads are available here so :
    DO NOT MIRROR MY LINKS WITHOUT PERMISSION
    rom beta 02 :http://www.mediafire.com/file/lme35ag9qdk1g1q/CM13_P8_to_H7_beta02_byWBT.zip
    Counter is at 3550 downloads after only 3 days ... :cool:
    Update to beta 03 + Set governor :http://www.mediafire.com/file/r9hfoziuxwk9zll/CM_P8_to_H7_beta03_Updater.zip

    For peoples who like Scores :
    AntutuScore_zpsumytm76l.jpg
    11
    Working on lineage 13 update... Coming soon

    Sent from my hwgra using XDA Labs
    7
    Hi, I just finished to built the full install, as I wanted every body to keep CM 13 data's when update it was little harder, ...(lineage build didn't have root function, and needed a special toybox and busybox to work fine for all apps) my own Lineage looks fine now. I will upload and write tuto tomorrow.

    I added some extra functions ... Surprise :)

    Sent from my hwgra using XDA Labs
    7
    Hi, new build tomorrow, vidéo record work with footje app, zoom is OK, screen record works too .. It was a good day :D
    Edit: I forgeted the most important: apps crash looks fixed as well !!

    Sent from my hwgra H7 using XDA Labs
    5
    Thanks for your hardwork

    Enviado do meu PLK-L01 através de Tapatalk
    hi,new build download link available at post #01 :D