[CM7/MIUI Kernel][AUG21]CM7-ETaNa v2.6.32.59
- Thread starter vadonka
- Start date
-
- Tags
- development
Install tweakaio.zip and use the bundled app, or download Myrt OTF in my sig. (Controls a subset of the OTF-values, mostly the CPU-related ones.)
Awesome!
Guys, i've just flashed 1208210751-CM7-ETaNa_LOC_DS-2.6.32.y.zip. And it feel very snappy and making my phone so damn smooth and fast. The question is, before this i'm using V6 supercharger. With this kernel, do i need to re-setup my supercharger again or no need which mean this kernel already awesome without supercharger? Thanks a lot. :highfive:
Guys, i've just flashed 1208210751-CM7-ETaNa_LOC_DS-2.6.32.y.zip. And it feel very snappy and making my phone so damn smooth and fast. The question is, before this i'm using V6 supercharger. With this kernel, do i need to re-setup my supercharger again or no need which mean this kernel already awesome without supercharger? Thanks a lot. :highfive:
No need for V6 with this kernel as it will overwrite the devs settings...
I just flashed 1206171644-ETaNa_STOCK-3.0.y.zip and now my phone has been showing the LG screen for 10 minutes... Does it really take this long as said in the first post?
Edit: Could it be that your zip file is broken? When I flashed the stock non OC the first time it gave me a boot loop, and when I tried to flash it the second time via TWRP I enabled zip file signature verification and it failed.
Edit: Could it be that your zip file is broken? When I flashed the stock non OC the first time it gave me a boot loop, and when I tried to flash it the second time via TWRP I enabled zip file signature verification and it failed.
Last edited:
Guys, as i posted earlier. I flashed 1208210751-CM7-ETaNa_LOC_DS-2.6.32.y.zip. Everything is fine. But then, i re-calibrate my battery via wipe battery stats @ cwm and using app. Ever since then, my battery became crazy like in the picture above. Is it because of i'm re-calibrate? Or my battery already spoiled? Thanks :highfive:
NOTE : Ignore the last bar/graph as i put in on charge. Focus on earlier progress bar/graph. Weird. -.-"
Last edited:
Z
Zephyr_blues
Guest
Really? phew, that's a relief. haha. Thought my battery needs replacement already. So, it is normal right? Thank you so much! :highfive::good:
But how "DS" work?
What's the difference with the standard?
Sent from my Optimus 2X using xda app-developers app
What's the difference with the standard?
Sent from my Optimus 2X using xda app-developers app
It's normal with ds...it's not necessary to wipe all
sorry, I've ignored that the guy has DS
Inviato dal mio Optimus 2X con Tapatalk 2
Guy i hav latest antutu cpu benchmark, i done benchmarking on number of steps. I m using stock etana kernel, at 800 i got 1300 score, but at 900mhz its arnd 3200, while at [email protected],[email protected] and [email protected],[email protected] the second core acfivation is under 700.so why is such huge diff of score occur.is the second core active at 900, if it is then how i can adjst second core actiation freq.i tried etana app to adjust core actvaion but no diff score,help me guys!!!!!!!!!!!!
edit:solve.its etana app issue, solved by removing old app and flashing new app
Sent from my Optimus 2X
edit:solve.its etana app issue, solved by removing old app and flashing new app
Sent from my Optimus 2X
Last edited:
Vadonka
*knock knock*
Users missed u.
Where are u?
*knock knock*
Users missed u.
Where are u?
Last edited:
Similar threads
- Locked
Top Liked Posts
-
There are no posts matching your filters.
-
275Kernel 2.6.32.y (long term release)
Based on the lge-kernel-star made by the CM team, with many cherry picked patches from the faux123, the vorkkernel upstream, the main lg streamline and another developer forum.
Update 2012.08.21:
Older changelogs:
Primary Download location (10Gbps, instant no wait): Click here (no need to wipe cache/dalvik)
TweakAIO app (need to install once) (10Gbps, instant no wait): Click here
NvRM Daemon CWM Installers (v10, v20f, v20q): Click here
File name description:
YYmmddHHMM-CM7-ETaNa_STOCK/LOC/HOC_(DS)
STOCK: Stock version, max speed: 1015Mhz
LOC: Low overclock version,max speed: 1216Mhz
HOC: High overclock version, max speed: 1408Mhz
DS: DS battery driver
50[CM7/MIUI Kernel][KANG][JUN14]CM7-ETaNa v3.0.34
Kernel 3.0.34 "stable" branch
Based on wkpark sources, cherry picked updates from the official linux kernel github source, Code Aurora and Linaro sources
I thank every developer who made their patches available to the public!
I wanna say thank you the following persons!
Spica1234 for the on the fly (aka OTF) pack. He is a great and dedicated developer, helping a lof about the OTF integration. Thank You bro!
Culblueswan for the Etana config editor application. He is developing this app so fast, made it the config change userfriendly. Thank You!
Important!
- The first boot may take while, its possible that after the second LG logo the screen will be black, DONT!! pull out the battery, just wait a few second, the bootanimation will be show soon. The second boot will be much more faster
- Linux version 2.6.32.y is discontinued, only emergency bugfix will be available in the future
- Touch CWM is incompatible with this kernel!! Use the normal CWM version! Its possible that the touch CWM cause the filesystem corruption and the r/w bug.
- Latest SetCPU have a bug even with the 2.6.32 kernel sometimes (and the stock cm7 too), that the second core will be always active! Use the 2.2.4 version, its working fine.
- Antutu CPU master 100% compatible with the kernel 3.0.y (have many profile and cpu1 deactivation is working fine)
- Recommended using Antutu Battery Saver app
- 3G eat the battery fast, its a weak point of the O2X. Use the Toggle2G app for switch back to 2G if the screen is off or the network is not used. This will help to save a LOT battery life
Update 2012.06.17:
- Linux kernel updated to 3.0.34
- Disable ARCH power
- Tweak CPU topology
- Minor thermal adjustment
- Minor voltage adjustment
- Some small fix
Update 2012.06.08:
- Optimized build flags for the new toolchain
- Kernel is compiled with Spica (c) supersonic toolchain, specially optimized for ARM devices
- Enabled ARCH POWER
- Updated ARM CPU topology code
- sched: minor fix
- FS: Backport dynamic writeback feature from 3.1
- Small hotplug fix
- Disabled frame pointer (this will increase performance)
Update 2012.06.05_16h:
- NEW: Fixed wrong SDRAM speed and voltage definitions
- Linux Kernel updated to 3.0.33
- Optimized build flags
Update 2012.06.03:
- CPU freq lowered to 1504Mhz max, 1552 not stable for everyone, 1504mhz enough for good
- Revert CPU based alignment handling (cause random poweroff and bsod)
Update 2012.06.03:
- Max CPU speed increased to 1552Mhz (can be use in xoc mode)
- SDRAM freq increased to 333Mhz
- Kernel is compiled with CPU alignment support and updated build flags
- USB mass storage speed issue fix
- CPU1 control increase max threshold values
- Set HZ to 250 and user HZ to 150
Older changelogs:
Changing ramhack, avp, gpu, vde:
start the terminal app then write:
su
otf
follow the on screen instructions then reboot
Spica OTF tweaks realtime parameters can be adjusted via the official HP kernel tweaker app (found on the market). The boot time parameters can be adjusted from the Etana config editor app (included in the kernel installer).
Spica OTF pack further information can be found in this forum: http://forum.xda-developers.com/showthread.php?t=1295486
You can find any information what you need in there.
Installer configuration file need to be place in the sdcard root. You can set what you need and the future version respect that file, so dont need to change anymore. Example: you can exclude that install the custom font.
Note: The kernel installer just update your tweakaio config file with the cpu uv parameters, not overwrite, so if you have custom values you not loose them.
The New parameter file location is: /data/tweakaio/tweakaio.conf
Log files in: /data/tweakaio/tweakaio.log
The installer script respect the parameter file in the future, so if you have some custom settings you will not loose this in a kernel update.
Parameter file is optimized for the phone screen, it can editable with any text editor app or with the Etana kernel tweaker app.
Kernel Features
- Balanced AVP OC freq
- Balanced 3D OC Freq
- Balanced DDR OC Freq
- Balanced Second Core Management (lag free)
- Default CPU freq is 1015Mhz
- Max CPU speed is 1216Mhz/1408Mhz depend on OC profile
- Optional Compcache (disabled by default) (you can enable that by editing the /system/etc/init.d/90tweakaio file and change COMPCACHE="off" to COMPCACHE="on"
- System logger is leave enabled by default (you can disable that by editing the /system/etc/init.d/90tweakaio file and change LOGGER="on" to LOGGER="off"
Voltage adjustment
- 216Mhz: Def: 790mV Min: 770mV
- 324Mhz: Def: 830mV Min: 780mV
- 503Mhz: Def: 880mV Min: 800mV
- 655Mhz: Def: 900mV Min: 820mV
- 816Mhz: Def: 930mV Min: 850mV
- 1015Mhz: Def: 1030mV Min: 950mV
- 1216Mhz: Def: 1200mV Min: 1150mV
- 1408Mhz: Def: 1300mV Min: 1250mV
Recommended CPU profiles for optimal performance
- No1: In call: 216-456 or 324-456(*)
- No2: Screen off: 216-324 or 324-324(*)
- No3: Charging: 216-1408 or 324-1408(*)
- No4: Battery <20%: 216-816 or 324-816(*)
Note: (*) Use this if you're having a problematic phone (which doesn't like UV and has a lot of BSODs). The stock kernel doesn't use the 216Mhz setting, some hardware may not support this(!), so that's why I recommend to use 324Mhz as the minimum value if you have problems with 216Mhz.
Primary Download location (10Gbps, instant no wait): Click here
File name description:
YYmmddHHMM-ETaNa_STOCK/OC_(DS)_OTF
STOCK: stock freq steps, no overclock
OC: overclock version
DS: DS battery driver
OTF: on the fly toolkit (c) Spica
32Long term (2.6.32.y branch) release updated:
- Many cherry picked commit from faux repo's and some other developers (thx guys)
- Massive improvement about the battery life (currently im on 1 day 20 hour uptime and still have 72% battery)
- Wifi driver issues fixed (probably, but im not sure about this one. its working for me at least)
- SOD/BSOD fixes
- Tweakaio updated (just some minor cleanup)
Possible issue:
- wifi driver maybe still not perfect. currently im using almost the same like in the original cm7 kernel. please report is you have any issues with this
ps: im solved my irl problem!
Have a nice summer guys!25with hard work im merging many useful patch from my 2.6.32 kernel and from the lg v20q kernel. plus clean up the overclock code.
the result:
-overclock finally working fine
-phone seems faster, and more responsive than ever
-im not experienced any bsod and any slowdown
-extra: better memory management, much more free memory like in the 2.6.32
im flashed the oc version to my phone, if im not experienced any major issue i will give you the cwm files.
now heading to my bed
night!
