CM7 Q&A

[GolfCranK]

latest telstra atrix radio N_01.100.00R

Ok so I have installed ota Gingerbread on my Telstra Atrix and don't like it, so heading back to CM7. But I found the phonecalls and Data were better with the Telstra Radio N_01.100.00R than with Bell N_01.77.33P

1. Will it work with CM7 or do I have to use N_01.77.33P ?
2. Will I lose it when I flash CM7?
3. Where can I get a zip for it?

Thanks

 

[mohitgarg]

I'll keep Logact running 24*7, and post the part of the logcat when the issue arises, as far as replicating it goes, it just happens randomly twice a day or so.

 

[Recon Freak]

silent toggle in notification screen.

wifi bluetooth and gps all toggle off and on fine. The silent toggle will not toggle off, but if I press and hold it pulls up the sound general setting menu. Is this setup to operate this way or is it a possible bug? I would rather it just toggle on and off like the other switches.

 

[turl1]

wifi bluetooth and gps all toggle off and on fine. The silent toggle will not toggle off, but if I press and hold it pulls up the sound general setting menu. Is this setup to operate this way or is it a possible bug? I would rather it just toggle on and off like the other switches.

You need to go and set up the toggle modes in the settings. Same as with the brightness toggle.

 

[cbizzle14]

That problem you have (#2) is a problem at least me and some other person is having. If you go back a couple pages you'll see us talk about it. Funny how the next person to post after you says he hasn't seen any of these issues. WELL! They exist and it makes the phone unusable for me. Wish that there was a known fix for it. I would go to CM's Atrix developer page and list it but it says you have to be able to replicate the problem and it is random so I don't know how they expect you to do that.

If you use the volume rocker to wake the phone that should get rid of the issue.

 

[motoatrix]

with the new CM7 Ba2tF released couple of days ago, what kernel is everyone using with this badboy?

 

[m.swg]

guys i have a big problem
i alrdy had aura blurred rom
i tried to install cm7
after installing from sd card
i wipe data & cashe
then i rebooted my phone
my phone was stuck on moto red logo
then i tried to restore my old rom
my phone was stuck on android logo that comes after moto logo in aura rom
i don't know what to do know
i followed each step but i'm in trouble now

 

[Pirateghost]

have you tried fastboot wiping first? see if something got borked up somewhere?

what recovery are you using?

 

[m.swg]

how can i do fastboot wiping
i put the recovery long time ago so i don't know what recovery
but when i open the recovery mode
on top it says : " Atrix 4G Recovery v4.0.0.2 GOAPK.COM "

 

[turl1]

how can i do fastboot wiping
i put the recovery long time ago so i don't know what recovery
but when i open the recovery mode
on top it says : " Atrix 4G Recovery v4.0.0.2 GOAPK.COM "

That sounds like an ancient recovery

/me wonders why don't people read the instructions. Oh, well...

 

[m.swg]

That sounds like an ancient recovery

/me wonders why don't people read the instructions. Oh, well...

ok i made a mistake -.-
i will fix thank you for replying
-------------------

 

[2leaponover1]

If you use the volume rocker to wake the phone that should get rid of the issue.

I tried the volume rocker... is that built into CM7 or an extra mod? I've used it as an extra mod for other roms but don't know if there is one compatible with CM7.

Update to those with this issue... I've logged it with the CM Atrix devs and they are waiting for a log cat from me. I have to find time when I don't use my phone to flash this rom and get them a log cat but I will. Hopefully they can get to the bottom of this. There response was fast to me posting the issue.

 

[mohitgarg]

Thanks. I have logcat running in the background, but have not had that issue since then (This is not a solution, just I am yet to encounter the issue again)

 

[TheBlackCat13]

I have an sd card formatted with ext4. I have installed CM7 and did the proper wipe data+cache+dvalik, and am trying to reinstall my apps from a titanium backup, moving apps to my SD card as needed to have enough space (I am using the default sd card location and I do not have "move any app to sd card" enabled).

This works for a while, but after moving a lot of apps to the SD card, suddenly it starts misbehaving. The OS stops seeing applications stored on the SD card, it stops mounting it automatically, the whole system slows down, and the screen starts going black spontaneously (the only way to get it back is a battery pull).

Fixing permissions does not correct this. I tried restoring only 30 or so apps at a time but it still happens eventually. I have wiped everything and started over at least 4 times now and it keeps happening. I am not out of space on the SD card, I still have 1.7 gb left. Does anyone know what might be happening?

 

[vdnuouo]

Can CM7 on atrix work on the Lapdock?

As I want to buy a lapdock but I am wondering whether CM7 can work on it.
I know the webtop is not available yet but I don't know the lapdock stuff has any relation with the webtop or not.

Thanks, guys~

 

[Pirateghost]

Can CM7 on atrix work on the Lapdock?

As I want to buy a lapdock but I am wondering whether CM7 can work on it.
I know the webtop is not available yet but I don't know the lapdock stuff has any relation with the webtop or not.

Thanks, guys~

lapdock=webtop

webtop has to be functional for lapdock to be of any use.....the lapdock has no OS of its own and relies on webtop to function

 

[miamirulz29]

I have the latest stable CM7 build installed on phone and my wifi sometimes does not stay connected. As soon I go back into wifi setting, the wifi reconnects (without even telling it to connect to the network). Has anybody been experiencing this issues?

It also could be that the wifi is connected, just that, the icon in the status bar will not show up.

 

[cheveoner]

Yesterday I installed last stable CM7 after some problems with the stock 2.3.4. Everything is working perfectly so far, however the internal sd card is still as in stock. Should I format and partition it from recovery?

I did that in my HTC Hero the first time I installed a custom rom, but I haven't seen that step on the instructions for CM7. Is it necessary?

 

[arukanferu]

Bricked Phone

Hello,

apologies if this is the wrong section, but I have managed to goose my phone and would appreciate any assistance getting it back.

I have followed a few guides and managed to root and unlock my Atrix and wanted to throw CM7 on as I had used CM on my G1 in the past.

After installing and running Tenfar's CWM recovery, I flashed CM7 and the gapps onto the device and rebooted.

Since doing this my phone gets the red moto splash and hangs.

I can still switch to fastboot etc so is there anyway possible to recover it? Also any ideas where I went wrong?

Once again any assistance would be fantastic!

*edit

I now realise going back over it I didnt perform:

2.After installation select Data Wipe/Factory Reset
3.Then Wipe Cache Partition

I am not fantastic at following steps clearly! Not sure what the best step to recovery is now.

 

[fischwrap]

Hello,

apologies if this is the wrong section, but I have managed to goose my phone and would appreciate any assistance getting it back.

I have followed a few guides and managed to root and unlock my Atrix and wanted to throw CM7 on as I had used CM on my G1 in the past.

After installing and running Tenfar's CWM recovery, I flashed CM7 and the gapps onto the device and rebooted.

Tenfar's recovery won't work for CM7. You need to use either ROM managers recovery or romracer's latest.

Sent from my MB860 using Tapatalk