Collection of 8227l firmware (android vers:6-9)

FRrandyat91

Member
Dec 21, 2020
9
0
11
[QUOTE = "Smarty_009, publicación: 82840247, miembro: 7264903"]
¿Alguien puede ayudarme a habilitar la pantalla dividida para que dos aplicaciones se ejecuten al mismo tiempo una al lado de la otra?

De alguna manera, esa función no funciona en mi unidad principal de Android.
[/CITAR]
TENGO EL MISMO DETALLE
 

FRrandyat91

Member
Dec 21, 2020
9
0
11
[QUOTE = "Speedyugur, publicación: 82904009, miembro: 10908349"]
nav 9973

¡Hola chicos! Pido su ayuda, hace unos días compré una unidad de radio android navimex NAV 9973 para mi coche peugeot 308 con estas especificaciones.

Modelo: 8227L
Versión de Android: 6.1.0

[IMG = "1"] https://i.ibb.co/JjxsgCF/IMG-20200623-WA0062.jpg [/ IMG]
[IMG = "2"] https://i.ibb.co/GJS6nCT/20200621-221917.jpg [/ IMG]
[IMG = "3"] https://i.ibb.co/FXr2TzX/20200621-222114.jpg [/ IMG]
[IMG = "4"] https://i.ibb.co/h9YP9QP/20200621-222120.jpg [/ IMG]
[IMG = "5"] https://i.ibb.co/qpQdvSS/20200621-222123.jpg [/ IMG]

¿Puedo actualizar este dispositivo a Android 8 o 9? Si puedo, necesito enlaces de archivos, seguro:RE

gracias por su ayuda.
[/CITAR]

TENGO UNA MUY SIMILAR LA PANTALLA MIA ES DE 6.2" REALES Y TUVE ,MUCHOS PROBLEMAS con la configuracion de resolucion POR ACTUALIZAR , te sugiero que si funciona bien no la actualices a menos que estes seguro que la rom es para ti. saludos
 

jrivasgsv

New member
Jan 6, 2021
2
0
11
Hy guys,
I have this android radio with fake android 9.1

Android: YT9216C_AHD_00005_V004_20191017_HIFI
System: Android 9.1 XY AUTO:3.1 (8227L)
CAN pro: 3.0 (8227L)
DDR: 2G FLASH:32G
CPU: A7 1.3 GHz x4
MCU1: 3.1

Kernel Version: [email protected]#5
Build number: android-trunk-m0.AC8227L-V1.0

The unit have hardware buttons for volume up and down.
Can i install android 9 touch or android 8.1 ?
Thanks for the reply and sorry for my bad english.
Hi, i have the same head unit i have a problem with HIFI options, how do i live it on, Whenever I start the vehicle I must change to on
WhatsApp Image 2021-01-04 at 2.07.10 PM.jpeg
 

tepimartin

New member
Jan 9, 2021
1
0
11
Hi!

I have a Junsun V1 head unit in my car (2G ram, 32G rom).
Please see model and android version on attached photos.

Can you please suggest me a stable, satisfactory firmware for my head unit to update for? The performance and booting time of this one is awful considering the 4 core cpu and 2g ram.
Futhermore can you send me a TWRP which I could flash without any problems?
Any resources and help is appreciated for this model.
IMG_20210109_193114.jpg

IMG_20201222_222518.jpg
IMG_20210109_192848.jpg


Thank you in advance!
 

szefuncio2015

Member
Jan 5, 2021
8
0
1
Hi guys, i have a question,
do you maybe have OTA update for YT9216C ? my version 2gb/16gb,
i found OTA update on xygala but is only for YT9216CH not for 9216C version, i don't want to broke my second device so i'm looking for somebody who can upload yt9216C OTA update to cloud because is no more avaliabe in xygala, or maybe i can update my device by 9216CH file ?
 

mark-1978

Senior Member
Jun 17, 2015
620
139
63
Hi guys, i have a question,
do you maybe have OTA update for YT9216C ? my version 2gb/16gb,
i found OTA update on xygala but is only for YT9216CH not for 9216C version, i don't want to broke my second device so i'm looking for somebody who can upload yt9216C OTA update to cloud because is no more avaliabe in xygala, or maybe i can update my device by 9216CH file ?
look here for your firmware.
 

mark-1978

Senior Member
Jun 17, 2015
620
139
63
because this is a fake android the actual is 8.1 go
read some about the radio, i thought it still is api level 27 so real android 8.1 oreo. Then you could just download an ota update for the c version(so the ch version from xygala).
Put it on a fat32 formatted usb stick together with the xyauto-update.bin file
and put the usb stick in the car stereo
boot the radio it should automatically verify the ota zip file and reboot to install it.

You should have a backup of a real c version, you can get it probably from the 4pda site.

good luck

Been busy with the radio and flashing it with a laptop. One time i flashed a wrong rom and the screen just stayed grey. But i could easily flash the stock rom again.
 
Last edited:

motinka

Member
Jan 23, 2021
25
1
3
Van ilyen fejegységem, telepítés után jól működött.
Az autó feszültségmentes lett, és most újraindul, és jelszót kér. Nem adtam neki sehol jelszót. Körülbelül 30 fajtát próbáltam ki, de semmi sem oldja meg. Valahogy vissza tudom állítani a fejegységet a gyári alapértékekre?
Vagy mit tehetek?
videó erről:
 

Mohie.soheim

Member
Jul 21, 2020
43
0
6
read some about the radio, i thought it still is api level 27 so real android 8.1 oreo. Then you could just use an ota update for the c version. Put it on a fat32 formatted usb stick together with the xyauto.bin file and in the radio, boot the radio it should automatically reboot to install the ota file.
Been busy with the radio and flashing it with a laptop. One time i flashed a wrong rom and the screen just stayed grey. But i could easily flash the stock rom again.
sorry for being beginner in this stuffs could you clarify more where to download the files and how to setup them
thanks in advance
 

miecz16

New member
Jan 9, 2021
4
0
1
I bought radio 2din a YT9216c and I can't update it via flashtool with v6.7 soft from xygala.com.
It flashes without any problems only after turning on the black monitor and every now and then brightens for a moment. I tried flash v6.2 and the same. When updating via usb memory with files ... ota_v6.2.zip and also v6.7, the system recognizes the update and after checking it restarts the device. Loading starts and reports an error after a minute. I do not know what the orogram should be because I noticed that AIDA64 shows the YT9218_00005_V004 android 6.0 model and the original software YT9216C_00005_V004. The sticker says YT9216CH V1.61 32G
Screen1.jpg Screen.jpg

Please help.
 

george$

New member
Feb 13, 2021
1
0
11
Resolution error

Hi!
I hope someone can help me. I updated my 8227L head unit, and the picture got bigger, than screen.


The original firmware:
HMI: TSKJ.D.P.F.3.C04.2019.09.05.08.30
MCU: TS907.190518(W)

How can i restore the original state?
Hi!
I have same problem!After wrong update my screen looks like yours with image bigger than screen.I used a file named 8227l-metazone.zip similar with screenfix.zip from this topic and my screen become blue!A repair shop managed to flash android but screen looks same with image bigger than screen.They told me that i need MCU firmware but seller will not give it to me.My MCU before update TS907.190518(W).
Now my MCU is TS907.190518(H)
Did you fix your screen? Can anybody to give me the MCU file to update or any other solution to fix this?
Thanks in advance for any assistance!
 

Attachments