I tried to download and extract the Android 9 files.
Should they show no bytes in Google Drive? Like I said, I have no idea what I am doing.
I tried to download and extract the Android 9 files.
Above are 2 android 7.1 & 8.1 example. Below is Android 9 example.
This is for those who have a ( 8227l ) android stereo and are looking for the update file zip. Also the mcu in the about phone menu should begin with ts . I have 5 files from jby tech, they are the Amazon seller of my hizpo android 8.1 stereo unit. From lots of research and emails to the company, i found that these Android stereos come in many brand names but run the same 8227l system. Another company with the same unit is joying but the device name is different along with the entire UI. Please do be sure you have a 8227l unit before proceeding. Other updates for other brands can be found on google and xda forum. I will try to remember to put link for xda forum. Below I have listed 2 groups of files. One is for touch screen only android stereo and the other is for touch screen with volume knob. Please choose according to your type of stereo. And follow the steps below exactly.
1. Download proper zip for your device.
2. Extract the 2 files from within the zip folder.
3. Copy & paste the ( .bin ) & other file on to a blank sd card or usb flash drive. Make sure these are the only 2 files on the sd card or flash drive.
4. With stereo unit powered off insert the sd card or usb flash drive and power on stereo. (Note some units will recognize the file immediately during boot, and others will prompt you after loading main screen. If unit does not recognize it, power off for 40sec and when u power on tap the screen in middle repeatedly with finger until the word "detected" shows in green. If it gives a message in red saying failed please check you have good download copy and have followed the instructions exactly. Will answer questions as i am able to.
All links to files and sites mentioned must be copy pasted. Im not able to attach external link yet.
The files below this line are for android6os,7os,8.1os 8227l units with a volume knob
Stock Android 7.1 firmware:
drive.google.com/folderview?id=1_D0IOyzUDNwo83Y4cVv054HPmaYs2JO7
Stock android 8.1 firmware:
drive.google.com/folderview?id=1LJ-FVgn73hxqJ-x7-pSJZuJDkfEV-c-7
Here is another version for this unit that is stock Android 6,7os but felt like it had a low resolution not for certain, but is safe to install in case base version still isnt a match for your unit:
Android7.1 V63
7drive.google.com/file/d/14UTC12nlWutwEqfsfux8spPY6qApw8Nt/view?usp=drivesdk
Android 7.1 v67
drive.google.com/file/d/1QQkQnxYZuO8rZ19KqVKPtVRIIE81sJ5b/view?usp=drivesdk
____________________________________
The files below are for the "TOUCH" only Android 9os 8227l units with touch back, home, vol -/+ buttons.
*** I have installed them on the non-touch unit and it will work but not allow volume knob to work, and will display " Activation code does not match " ***
Stock android 9 touch firmware version 1:
drive.google.com/file/d/19Yn_v6hXMJBObvgS7eqPN2nVgHhoisyX/view?usp=drivesdk
Stock android 9 touch firmware version 2:
drive.google.com/file/d/14gSJXCNqYPpUkgg7M_sd3jim6JvF1R3M/view?usp=drivesdk
Above are 2 android 7.1 & 8.1 example. Below is Android 9 example.
This is for those who have a ( 8227l ) android stereo and are looking for the update file zip. Also the mcu in the about phone menu should begin with ts . I have 5 files from jby tech, they are the Amazon seller of my hizpo android 8.1 stereo unit. From lots of research and emails to the company, i found that these Android stereos come in many brand names but run the same 8227l system. Another company with the same unit is joying but the device name is different along with the entire UI. Please do be sure you have a 8227l unit before proceeding. Other updates for other brands can be found on google and xda forum. I will try to remember to put link for xda forum. Below I have listed 2 groups of files. One is for touch screen only android stereo and the other is for touch screen with volume knob. Please choose according to your type of stereo. And follow the steps below exactly.
1. Download proper zip for your device.
2. Extract the 2 files from within the zip folder.
3. Copy & paste the ( .bin ) & other file on to a blank sd card or usb flash drive. Make sure these are the only 2 files on the sd card or flash drive.
4. With stereo unit powered off insert the sd card or usb flash drive and power on stereo. (Note some units will recognize the file immediately during boot, and others will prompt you after loading main screen. If unit does not recognize it, power off for 40sec and when u power on tap the screen in middle repeatedly with finger until the word "detected" shows in green. If it gives a message in red saying failed please check you have good download copy and have followed the instructions exactly. Will answer questions as i am able to.
All links to files and sites mentioned must be copy pasted. Im not able to attach external link yet.
The files below this line are for android6os,7os,8.1os 8227l units with a volume knob
Stock Android 7.1 firmware:
drive.google.com/folderview?id=1_D0IOyzUDNwo83Y4cVv054HPmaYs2JO7
Stock android 8.1 firmware:
drive.google.com/folderview?id=1LJ-FVgn73hxqJ-x7-pSJZuJDkfEV-c-7
Here is another version for this unit that is stock Android 6,7os but felt like it had a low resolution not for certain, but is safe to install in case base version still isnt a match for your unit:
Android7.1 V63
7drive.google.com/file/d/14UTC12nlWutwEqfsfux8spPY6qApw8Nt/view?usp=drivesdk
Android 7.1 v67
drive.google.com/file/d/1QQkQnxYZuO8rZ19KqVKPtVRIIE81sJ5b/view?usp=drivesdk
____________________________________
The files below are for the "TOUCH" only Android 9os 8227l units with touch back, home, vol -/+ buttons.
*** I have installed them on the non-touch unit and it will work but not allow volume knob to work, and will display " Activation code does not match " ***
Stock android 9 touch firmware version 1:
drive.google.com/file/d/19Yn_v6hXMJBObvgS7eqPN2nVgHhoisyX/view?usp=drivesdk
Stock android 9 touch firmware version 2:
drive.google.com/file/d/14gSJXCNqYPpUkgg7M_sd3jim6JvF1R3M/view?usp=drivesdk
Hi everyone,
I was able to install the firmware but it still shows android 8.1 and my problem remains, the right side buttons are not working and the touchscreen mapping is inverted left is right and right is left I don't know if the touchscreen is broken or if it's a software issue I really don't know and I need help please.
Im using the swTNVIN Car Stereo on Toyota Vanguard.
Thanks.
Hello my friends. I have an android hand unit like the one on the link. I need to do firmware update but my seller is still sending me the wrong file. I am writing you information from my system.
how can i find the right firmware?
Hi, Buy a 12-inch Tesla unit for my FORD RANGER, it's Android SD822_HWñ1.0_SW: 0.3.4_20181122, System 7.1, CPU AMRv7 x4, Display 800x1280, MCU1: HW8227-0.1-SWO-6.6
The problem is that I change the resolution of the screen and now I cannot access the configuration menu.
What I can do?
Thank you so much
I've been trying this and I think my problem is the unit has to be powered off then turned on with the USB drive present. How do you turn it off completely? Or is a restart enough?
Thanks!
can someone help me to update or have the audio balance fader and the name on the radio names please? mine is a 8227L 1g ddr and 16 gb flash
https://ibb.co/Fzf1N4v
https://ibb.co/Z8ZXzgm
https://ibb.co/SKJsBDx
Let me know or device specification I will send you the link
Pls mention ur device is hifi or dsp or regular one
---------- Post added at 09:38 AM ---------- Previous post was at 09:36 AM ----------
Use the reset button or you have to flash ur hub with spflashtoolanother idea is connect a mouse via usb cable and try
---------- Post added at 09:40 AM ---------- Previous post was at 09:38 AM ----------
Sure ur selected firmware is wrong otherwise it work
---------- Post added at 09:42 AM ---------- Previous post was at 09:40 AM ----------
What's ur problem?
Let me know or device specification I will send you the link
Pls mention ur device is hifi or dsp or regular one
---------- Post added at 09:38 AM ---------- Previous post was at 09:36 AM ----------
Use the reset button or you have to flash ur hub with spflashtoolanother idea is connect a mouse via usb cable and try
---------- Post added at 09:40 AM ---------- Previous post was at 09:38 AM ----------
Sure ur selected firmware is wrong otherwise it work
Hello my friend
my device is hifi
YT9216C AHD 00005 V004 20191030HIFI
ANDROID os 8.1
XY AUTO 3.1 (8227L)
Can Pro 3.0 (8227L)
MCU 3.1 (8227L)
---------- Post added at 09:42 AM ---------- Previous post was at 09:40 AM ----------
What's ur problem?
---------- Post added at 09:45 AM ---------- Previous post was at 09:42 AM ----------
9213a is ur device?share the photo of system info but clear last one is not clear at all
Hello my friend
my device is hifi
YT9216C AHD 00005 V004 20191030HIFI
ANDROID os 8.1
XY AUTO 3.1 (8227L)
Can Pro 3.0 (8227L)
MCU 3.1 (8227L)
Hello my friend
my device is hifi
YT9216C AHD 00005 V004 20191030HIFI
ANDROID os 8.1
XY AUTO 3.1 (8227L)
Can Pro 3.0 (8227L)
MCU 3.1 (8227L)
I will post the download link soon
---------- Post added at 10:22 AM ---------- Previous post was at 10:09 AM ----------
Here u are
https://yadi.sk/d/I35-7_1JHCrTcA
I will post the download link soon
---------- Post added at 10:22 AM ---------- Previous post was at 10:09 AM ----------
Here u are
https://yadi.sk/d/I35-7_1JHCrTcA
hey my friend, i have this android unit,
https://www.aliexpress.com/item/3299...1af44c4dF4R6aF
https://imgur.com/RZjBdXT
https://imgur.com/Nwhontr
https://imgur.com/TM4YUY4
can you give me a firmware for this please?
I will post the download link soon
---------- Post added at 10:22 AM ---------- Previous post was at 10:09 AM ----------
Here u are
https://yadi.sk/d/I35-7_1JHCrTcA
Hi again.
I want to root my system. But I don't know how.
Ι have this system... https://www.aliexpress.com/item/33035372080.html?spm=a2g0s.9042311.0.0.25a64c4dPPWPHj
YT9216C AHD 00005 V004 20191030HIFI
ANDROID os 8.1
XY AUTO 3.1 (8227L)
Can Pro 3.0 (8227L)
MCU 3.1 (8227L)
Otherwise upgrade the firmware.
How can i find the right firmware? How can i find instructions for all?
Help me please because my seller doesn't :crying:
Hi again.
I want to root my system. But I don't know how.
Ι have this system... https://www.aliexpress.com/item/33035372080.html?spm=a2g0s.9042311.0.0.25a64c4dPPWPHj
YT9216C AHD 00005 V004 20191030HIFI
ANDROID os 8.1
XY AUTO 3.1 (8227L)
Can Pro 3.0 (8227L)
MCU 3.1 (8227L)
Otherwise upgrade the firmware.
How can i find the right firmware? How can i find instructions for all?
Help me please because my seller doesn't :crying:
hey my friend, i have this android unit,
https://www.aliexpress.com/item/3299...1af44c4dF4R6aF
https://imgur.com/RZjBdXT
https://imgur.com/Nwhontr
https://imgur.com/TM4YUY4
can you give me a firmware for this please?
My dear friend thank you. I have received the files. I would appreciate it if you could indicate the way to do it, because the files have different names.I'll post the instruction soon buddy dony worry
---------- Post added at 04:19 PM ---------- Previous post was at 04:12 PM ----------
Hi my friend
Here you are again flash the firmware via USB flash drive and enjoy it and if you like press the thank button
Firmware YT9216C_AHD_00005_V004_20190916_HIFI (2_16) UI4 ROOT, TWRP, translation.
For the flash drive https://yadi.sk/d/xLXXxAfGnnWlZg
For the flash drive https://yadi.sk/d/YAJ8KbvwbO4How The
My dear friend thank you. I have received the files. I would appreciate it if you could indicate the way to do it, because the files have different names.
No matter which brand of usb flash drive if you mean it by usb flash drive I mean the usb pen drive
But for flash you have to connect the pendrive (usb flash drive) into 6pin usb cable otherwise your uprgradind procedure will be failed
Dude are you sure about your device model number?
You can use the Spflashtool to flash your device but its complicated if you have no clue about MTK
ABOUT THE FIRMWARE IM SURE
PLEASE USE THE LINK WHICJ I POSTED WHILE AGO AND LET ME KNOW
This is my device
and this usb female cables i have for USB drive
You don't have to be angry with me. Thanks for helping me.
I just wrote to you that I want to rename the firmware. If I'm wrong tell me what to do. I downloaded both of the firmware you gave me today and wrote the same message