Collection of 8227l firmware (android vers:6-9)
- Thread starter ighostsgunnaz
- Start date
My ac8277l 9216B is not going to sleep mode. When I turn on to access its start again the android (20 sec)
How can I enable sleep mode?
How can I enable sleep mode?
Maybe the wire connect is wrong.
The "red" from radio is connect to "red" (acc) to car
"yellow" from radio to "yellow (memory)" to car
Yup.
I tested a moment ago and I connected the radio to the power supply and it works properly only when the yellow wire is connected to the power supply permanently, then disconnecting the red wire puts radio to sleep.
in reverse order, when red wire connected to the battery, when yellow wire is disconnected turns off the radio, after connecting, radio start booting from the beginning.
some manufacturers give these two cables with swap connectors because you often have to swap them.
I tested a moment ago and I connected the radio to the power supply and it works properly only when the yellow wire is connected to the power supply permanently, then disconnecting the red wire puts radio to sleep.
in reverse order, when red wire connected to the battery, when yellow wire is disconnected turns off the radio, after connecting, radio start booting from the beginning.
some manufacturers give these two cables with swap connectors because you often have to swap them.
Last edited:
Salut, mă poate ajuta cineva cu o actualizare sau o schimbare de software? Mulțumesc
Attachments
Last edited:
Thanks bro there are many firmwares like 9218c 9218dlc i don't know which one to choose can you help me?
Thank you so much. One more question.
Its 1 gb 16 gb storage device. Is it worth to upgrqde to 9.1
Will google assistant work?
If you have any idea can yiu tell me what is can pro 3.1? Is it builtin or i have to add canpro decoder to get door info etc
I dont know, maybe someone who uses it on daily basis can say something more about it in this topic.
Mine has been sitting on the shelf for a year actually, thats how im so disappointed with it, I've never tried it in the car, I'm just spending my time to getting it finnally 'usable.
I don't know yet how actually can pro works, but as i see the updates brought a lot of improvements to can pro, e.g. unline updates, so it seems that at least that company takes care of.
About Android
8.1go its a real Android 6.0.
9.1 its a real 8.1 Android.
10.0/10.1/11 that can be found, are real 8.1adnroid.
You can see screenshots of lastest update here: post-88145547
Mine has been sitting on the shelf for a year actually, thats how im so disappointed with it, I've never tried it in the car, I'm just spending my time to getting it finnally 'usable.
I don't know yet how actually can pro works, but as i see the updates brought a lot of improvements to can pro, e.g. unline updates, so it seems that at least that company takes care of.
About Android
8.1go its a real Android 6.0.
9.1 its a real 8.1 Android.
10.0/10.1/11 that can be found, are real 8.1adnroid.
You can see screenshots of lastest update here: post-88145547
Hi there. So i have a xtron unit with alps8227l chip and i am trying to connect a dashcam. I connect it to usb port on unit but i get no signal from ucam driver app. On unit i get acess only to internal storage of cam sdcard. Anyway i can solve this or must i use xtron specific dashcams? Thanks
At the back of your unit you must have RCA female, usually yellow one, cable that matches units cam input.
If not there ask seller to give you or sell one.
It looks like this ... https://www.aliexpress.com/item/400...!sea!HR!2342727309&curPageLogUid=3uHzi2PBQWaP
Yes i have RCA on unit because i have already a rear CAM installed. What i think i souls need then is a RCA to usb output. Anyway think i am going to return this cam and get a xtron one with ADAS function they state it uses only USB connection no need for rca
ADAS must connect thru USB port attached at the back of unit , but must be 2.0, not USB 1.1.
I would see also for settings for TCON and CAMs in factory settings if they are correctly set.
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
1
Maybe it requires also only to perform a clean install (erase from boot - recovery) - keep tapping all five fingers on screen when unit starts and wait to recognize, it will erase system automaticaly prepare it again and start from factory default. -
9https://m.youtube.com/watch?v=FLe7yx3XJP8https://m.youtube.com/watch?v=FLe7yx3XJP8
click video link and comment. im not a developer i just listened to the amazon sellers directions and then searched 8227l in google and found a bunch of files, then tested them and now i want to pass the info on.
tp the guys asking if itll work?
i dont know you gotta test it like i did. they worked on my unit. and the files i donloaded came from other style stereos with android.
i just generally think they are all same firmware if it look similar to actual stereo design and ui .33Hi Dude
Find the attached link
U can find there 2 firmwares first is root and 2nd is stock hope rectify ur issue
https://cloud.mail.ru/public/3ESw/3N7c1p4tY/
This is my device
and this usb female cables i have for USB drive
You don't have to be angry with me. Thanks for helping me.
I just wrote to you that I want to rename the firmware. If I'm wrong tell me what to do. I downloaded both of the firmware you gave me today and wrote the same message2i have the following head unit in the link attached will android 9 rom support this head unit ? It has touch button such as back,home,volume up/down.
and how does UI2 look like?
https://drive.google.com/open?id=0B-DeZ2cJS-h6UFVKSkswdExXX2NMNnc2akoydS1jcVQxd1hN2Does anyone know what in the name of lord jesus is this goddamn MCU?!
Alps FF-5000
HMI: TSKJ.C.O.F.3.C04.2019.05.23.13.30
MCU: TS907.190518(H)
MEDIA: HC_v1.0.0_190517_1600
This thing just drove me crazy, you can’t find updates for it, you can’t have MCU details so you know what MCU you need to update. Can’t enable install 3rd party apps, can’t do sh** with this idiotic OS!
