How To install the Latest Stable Firmware of Lenovo k3 note Model K50-T5
System Version: K50-T5_USR_ST1614_5.294.1_1604011150_mp1V2.39_CNFit models: Le lemon k3 note (K50-T5)
All necessary files can be found here ## Google drive link
Please take note that this is the Original Stock Firmware for the Model K50-T5 with Chinese/English support only and also is not Coming with Gapps Pre-installed
Changelog##
Code:
[B][CENTER]This ROM is based on the official 1613 vibe3.1 Android 6.0 stable version
The problem has been fixed or changed (compared with the previous software has been released shall indicate whether there is a large Android version upgrade):
1, only charging mode plug USB, the computer can read the phone memory problem
2. Connect the AP to WEP encryption in WLAN scanning interface will continue to appear WLAN automatically shut down, open issues
3, switch the phone to the default external memory storage, OTA upgrade failure
4, the upgrade version of MR1 to stop running when M Bluetooth Sharing[/CENTER][/B]
>>Now Before you doing anything it's recommended to Backup your contacts and important data into your memory card or your laptop or your PC and Your Phone must have least 50% of battery <<
Step 1. Extract the Downloaded files on your Laptop/PcStep 2.Install LenovoUsbDriver_v1.1.13 On your Pc and after the Instalation Restart your Laptop/PC
Step 3.If u allready did a backup of your important Data Power Off your Device
Step 4.Run the Sp flash tool(Its inside the Zip file with the Rom that u downloaded)
Step 5. Now navigate to Option/Download/General setting/DL DL All with checksum Tab and check Usb Checksum and EMMC checksum like in the picture down bellow and after setting that up click on X
Step 6.Now from "Download" Tab click on "Scatter-Loading" and Navigate to the Scatter-Loading file(it should be like this path Your PC\K50-T5_USR_ST1614_5.294.1_1604011150_mp1V2.39_CN\target_bin\MT6752_Android_scatter)see picture bellow
Step 7.Once you Hit Open on the MT6752_Android_scatter a Procesing window will pop up(see picture bellow) Loading the necessary files for Flashing(its about 30sec-1min sec depending on your PC configuration)
Step 8. Now Click On Download Tab and Set Firmware Upgrade
Step 9. Now Connect your Phone(Turned Off) To the Pc/Laptop using Usb cable and wait about 10-15 for the Flashing Process
Step 10. Once the Flashing Process is completed a Green window will Pop Up
Step 11.Close the SP flash Tool and disconnect your phone from the Pc/Laptop
Step 12. Turn on Your Phone and wait about 10 mins for the further installation
Step 13. Congrats You have the Last stable K50-T5_USR_ST1614_5.294.1_1604011150_mp1V2.39_CN version installed
About Installing custom recovery on K3 Note using SP Flash Tool Follow This COMPLETE TUTORIAL
Thanks To @stone_hengeALSO FOLLOW THIS COMPLETE TUTORIAL
If you found his Tutorial guide useful you can Click the Thanks! button
Many thanks to everyone of the Lenovo K3 Note Index Thread especially @hackerpower @stone_henge @911-Future_MakerOriginal source :club.lenovo.com.cn
Attachments
-
90.3 KB Views: 4,788
-
178.6 KB Views: 4,793
-
238 KB Views: 4,807
-
129.3 KB Views: 4,971
-
230 KB Views: 4,622
Last edited: