• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[Convert/Upgrade/Unbrick] [CN to GLOBAL] MR0 even from Android 11 [FIX bootloop/IMEI/notifications]

Search This thread

sco-mito

Senior Member
Sep 20, 2010
91
21
Turin
Xiaomi Black Shark 3
1638785480323.png

ONCE 4 ALL FREE 4 ALL (how it should be...)
a particoular thx to the super ignorant blackshark support that NEVER GAVE ME A SINGLE ANSWER (THANK YOU JASON FIND ANOTHER WORK)
DO NOT BUY BLACKSHARK


Now the bible:

Installation steps (follow closely)

1 Make a TWRP backup

2 Use a pc or an OTG to save your actual backup

3 Transfer the MR0 Global TWRP BACKUP in the otg(easiest way) or in the internal memor TWRP/Backup/*devicecode*/*date*/(backup files)

4 Restore (unpin recovery to keep TWRP)& WIPE data& internal storage

5 Reboot your phone in recovery after install

6 Install magisk (last version >23 for Android 11) to patch the boot.img

7 Enjoy

8 In case of problems use adb push* command to tranfer the backup files again then do again from point 4

9 In case of bootloop switch the boot from A to B :
-from TWRP->Reboot->Slot
or
-from cmd fastboot "fastboot --set-active=a" then reboot


HOW TO FIX OTA

To OTA update, restore recovery from the backup of the global ROM, then procede with the update using the *#*#1027#*#* method than reflash TWRP via fastboot
trying to dump the recovery from the official ota



10 Optional: to enable SafetyNet w/ Magisk flash this module -->[MAGISK][Module] GAPPS 4 Magisk

*ADB File Transfer setup even from TWRP

First, install Minimal ADB & Fastboot or get the official tools from the Google developer site. I prefer the minimal tools as they contain everything you need in a small installable package, but both will work just fine. If you installed the minimal package, you can simply open this from your Windows search bar. Type:

adb devices

and make sure your device is recognized there.



If you see something like this, you’re good to go.

ADB push​

If you’ve mastered ADB pull, ADB push is easy. It’s the same thing basically. Let’s say I have a file called “goat.jpg” in my root of my C: drive. To push this to the root of my device storage (as in, accessible by my file manager), I simply type:

adb push “C:\goat.jpg” “/sdcard/”

And that’s it! You have now mastered both ADB pull and ADB push!


Download LINKS:

Magisk 23.0 flashable
Global JOYUI 12.5 MR0 Android 11
CN JOYUI 12.5 MR0 Android 11 (no persist)

More useful files:
adb & fastboot [lastest stable]
Twrp MQ3 based
 
Last edited:

kevin mitnick

Senior Member
Oct 28, 2011
275
36
@weijen6 do not flash persist.img while restore from twrp backup, if you want to try CN version with no lock mi account.
 
Last edited:

febrifeb

New member
Dec 15, 2021
2
0
View attachment 5475809
ONCE 4 ALL FREE 4 ALL (how it should be...)
a particoular thx to the super ignorant blackshark support that NEVER GAVE ME A SINGLE ANSWER (THANK YOU JASON FIND ANOTHER WORK)
DO NOT BUY BLACKSHARK


Now the bible:

Installation steps (follow closely)

1 Make a TWRP backup

2 Use a pc or an OTG to save your actual backup

3 Transfer the MR0 Global TWRP BACKUP in the otg(easiest way) or in the internal memor TWRP/Backup/*devicecode*/*date*/(backup files)

4 Restore (unpin recovery to keep TWRP)& WIPE data& internal storage

5 Reboot your phone in recovery after install

6 Install magisk (last version >23 for Android 11) to patch the boot.img

7 Enjoy

8 In case of problems use adb push* command to tranfer the backup files again then do again from point 4

9 In case of bootloop switch the boot from A to B :
-from TWRP->Reboot->Slot
or
-from cmd fastboot "fastboot --set-active=a" then reboot


HOW TO FIX OTA

To OTA update, restore recovery from the backup of the global ROM, then procede with the update using the *#*#1027#*#* method than reflash TWRP via fastboot
trying to dump the recovery from the official ota



10 Optional: to enable SafetyNet w/ Magisk flash this module -->[MAGISK][Module] GAPPS 4 Magisk

*ADB File Transfer setup even from TWRP

First, install Minimal ADB & Fastboot or get the official tools from the Google developer site. I prefer the minimal tools as they contain everything you need in a small installable package, but both will work just fine. If you installed the minimal package, you can simply open this from your Windows search bar. Type:

adb devices

and make sure your device is recognized there.



If you see something like this, you’re good to go.

ADB push​

If you’ve mastered ADB pull, ADB push is easy. It’s the same thing basically. Let’s say I have a file called “goat.jpg” in my root of my C: drive. To push this to the root of my device storage (as in, accessible by my file manager), I simply type:

adb push “C:\goat.jpg” “/sdcard/”

And that’s it! You have now mastered both ADB pull and ADB push!


Download LINKS:

Magisk 23.0 flashable
Global JOYUI 12.5 MR0 Android 11

More useful files:
adb & fastboot [lastest stable]
Twrp MQ3 based
hello..i tried restore twrp global MR0 but my phone just reboot.
recently, my bs3 lost imei and baseband.
do you know how to fix it ?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    network /camera is ok but can't add fingerprint how to fix it?
    Thx to @wrinkletit

    dial
    *#*#466349#*#*

    then select the first option (the chineese word)
    press start
    at the "Flesh Flat" is press your thumb hard onto the fingerprint sensor, make sure the sensor if fully covered by your thumb
    then at the "Flat Black" is press your thumb with black cloth against the sensor. again make sure fully cover the sensor
    1
    Maybe you re only booting phone on the wrong Active partition.

    Try this in fastboot

    fastboot --set-active=a
    recovery is ok now and i'm downloading gobal rom and waiting to flash .Thaks for your help <3
    1
    Hi guys. Before doing this CN to Global, maybe you can provide the updated way to unlock bootloader for BS 3? Thanks
  • 4
    1638785480323.png

    ONCE 4 ALL FREE 4 ALL (how it should be...)
    a particoular thx to the super ignorant blackshark support that NEVER GAVE ME A SINGLE ANSWER (THANK YOU JASON FIND ANOTHER WORK)
    DO NOT BUY BLACKSHARK


    Now the bible:

    Installation steps (follow closely)

    1 Make a TWRP backup

    2 Use a pc or an OTG to save your actual backup

    3 Transfer the MR0 Global TWRP BACKUP in the otg(easiest way) or in the internal memor TWRP/Backup/*devicecode*/*date*/(backup files)

    4 Restore (unpin recovery to keep TWRP)& WIPE data& internal storage

    5 Reboot your phone in recovery after install

    6 Install magisk (last version >23 for Android 11) to patch the boot.img

    7 Enjoy

    8 In case of problems use adb push* command to tranfer the backup files again then do again from point 4

    9 In case of bootloop switch the boot from A to B :
    -from TWRP->Reboot->Slot
    or
    -from cmd fastboot "fastboot --set-active=a" then reboot


    HOW TO FIX OTA

    To OTA update, restore recovery from the backup of the global ROM, then procede with the update using the *#*#1027#*#* method than reflash TWRP via fastboot
    trying to dump the recovery from the official ota



    10 Optional: to enable SafetyNet w/ Magisk flash this module -->[MAGISK][Module] GAPPS 4 Magisk

    *ADB File Transfer setup even from TWRP

    First, install Minimal ADB & Fastboot or get the official tools from the Google developer site. I prefer the minimal tools as they contain everything you need in a small installable package, but both will work just fine. If you installed the minimal package, you can simply open this from your Windows search bar. Type:

    adb devices

    and make sure your device is recognized there.



    If you see something like this, you’re good to go.

    ADB push​

    If you’ve mastered ADB pull, ADB push is easy. It’s the same thing basically. Let’s say I have a file called “goat.jpg” in my root of my C: drive. To push this to the root of my device storage (as in, accessible by my file manager), I simply type:

    adb push “C:\goat.jpg” “/sdcard/”

    And that’s it! You have now mastered both ADB pull and ADB push!


    Download LINKS:

    Magisk 23.0 flashable
    Global JOYUI 12.5 MR0 Android 11
    CN JOYUI 12.5 MR0 Android 11 (no persist)

    More useful files:
    adb & fastboot [lastest stable]
    Twrp MQ3 based
    2
    network /camera is ok but can't add fingerprint how to fix it?
    Thx to @wrinkletit

    dial
    *#*#466349#*#*

    then select the first option (the chineese word)
    press start
    at the "Flesh Flat" is press your thumb hard onto the fingerprint sensor, make sure the sensor if fully covered by your thumb
    then at the "Flat Black" is press your thumb with black cloth against the sensor. again make sure fully cover the sensor
    1
    Maybe you re only booting phone on the wrong Active partition.

    Try this in fastboot

    fastboot --set-active=a
    recovery is ok now and i'm downloading gobal rom and waiting to flash .Thaks for your help <3
    1
    Hi guys. Before doing this CN to Global, maybe you can provide the updated way to unlock bootloader for BS 3? Thanks