[Convert/Upgrade/Unbrick] [CN to GLOBAL] MR0 even from Android 11 [FIX bootloop/IMEI/notifications]

Search This thread

tomelich

Senior Member
Jul 5, 2014
54
6
El problema es que el celular entra en modo fastboot
no parpadeará twrp
esta en bootloop
Por eso necesito firmware en modo edl, ya que tambien puedo entrar en modo edl

----------

MOD EDIT: English Translation Below

The problem is that the cell phone enters fastboot mode
won't flash twrp
it's in bootloop
That's why I need firmware in edl mode, since I can also enter edl mode
 
Last edited by a moderator:

sco-mito

Senior Member
Sep 20, 2010
93
23
Turin
Xiaomi Black Shark 3
No, you have to unlock bootloader than install twrp then follow the guide, the link i sent Is QFIL/EDL

I won't answer anymore you don't write or translate in english it can be useful for other users
 

tomelich

Senior Member
Jul 5, 2014
54
6
I also tried to unlock the bootloader with the files that are here on xda
but the process still fails
I have the Loader that recognizes the boxes all the partitions
but I don't have software in XML for flashing by EDL mode
I am waiting for the mega file to finish downloading, so I can verify what format it is in.
All the files that I saw and downloaded are copies made by twrp or else they are Ota files
 

iampatricktan

Senior Member
Sep 13, 2015
242
33
Hi guys. Before doing this CN to Global, maybe you can provide the updated way to unlock bootloader for BS 3? Thanks
 

iampatricktan

Senior Member
Sep 13, 2015
242
33
Thanks for the reply. I just tried it now but when choosing the path for the flash files, it says couldn't find flash script. Any idea?
 

kevin mitnick

Senior Member
Oct 28, 2011
297
36
View attachment 5475809
ONCE 4 ALL FREE 4 ALL (how it should be...)
a particoular thx to the super ignorant blackshark support that NEVER GAVE ME A SINGLE ANSWER (THANK YOU JASON FIND ANOTHER WORK)
DO NOT BUY BLACKSHARK


Now the bible:

Installation steps (follow closely)

1 Make a TWRP backup

2 Use a pc or an OTG to save your actual backup

3 Transfer the MR0 Global TWRP BACKUP in the otg(easiest way) or in the internal memor TWRP/Backup/*devicecode*/*date*/(backup files)

4 Restore (unpin recovery to keep TWRP)& WIPE data& internal storage

5 Reboot your phone in recovery after install

6 Install magisk (last version >23 for Android 11) to patch the boot.img

7 Enjoy

8 In case of problems use adb push* command to tranfer the backup files again then do again from point 4

9 In case of bootloop switch the boot from A to B :
-from TWRP->Reboot->Slot
or
-from cmd fastboot "fastboot --set-active=a" then reboot


HOW TO FIX OTA

To OTA update, restore recovery from the backup of the global ROM, then procede with the update using the *#*#1027#*#* method than reflash TWRP via fastboot
trying to dump the recovery from the official ota



10 Optional: to enable SafetyNet w/ Magisk flash this module -->[MAGISK][Module] GAPPS 4 Magisk

*ADB File Transfer setup even from TWRP

First, install Minimal ADB & Fastboot or get the official tools from the Google developer site. I prefer the minimal tools as they contain everything you need in a small installable package, but both will work just fine. If you installed the minimal package, you can simply open this from your Windows search bar. Type:

adb devices

and make sure your device is recognized there.



If you see something like this, you’re good to go.

ADB push​

If you’ve mastered ADB pull, ADB push is easy. It’s the same thing basically. Let’s say I have a file called “goat.jpg” in my root of my C: drive. To push this to the root of my device storage (as in, accessible by my file manager), I simply type:

adb push “C:\goat.jpg” “/sdcard/”

And that’s it! You have now mastered both ADB pull and ADB push!


Download LINKS:

Magisk 23.0 flashable
Global JOYUI 12.5 MR0 Android 11
CN JOYUI 12.5 MR0 Android 11 (no persist)

More useful files:
adb & fastboot [lastest stable]
Twrp MQ3 based
still bootloop even flash both of slots. i try flash this https://forum.xda-developers.com/t/qfil-files-for-both.4387107/ , no bootloop, got to homescreen, but imei and baseband aren't fixed..
i have no idea
 

houmarrrr

Member
Dec 23, 2015
21
1
ahmedx je peux vous aider je parle arabe francais

----------

MOD EDIT: English Translation Below

ahmedx i can help you i speak french arabic
 
Last edited by a moderator:

Sergio2022

New member
Feb 19, 2022
1
0
Vou trocar a ROM do Black shark 3 mas preciso marcar essas caixas de arquivos para fazer backup da minha ROM stock do Android 10, pois se der erro ao piscar a ROM do Android 11 tenho o backup em restore, mas não Não sei qual dessas caixas eu marco , para fazer o backup , posso marcar todas ?????
 

Attachments

  • IMG-20220219-WA0033.jpg
    IMG-20220219-WA0033.jpg
    93.9 KB · Views: 18
  • IMG-20220219-WA0032.jpg
    IMG-20220219-WA0032.jpg
    132.8 KB · Views: 18
  • IMG-20220219-WA0031.jpg
    IMG-20220219-WA0031.jpg
    97.7 KB · Views: 18

kurikikakaki

New member
May 26, 2022
3
0
View attachment 5475809
ONCE 4 ALL FREE 4 ALL (how it should be...)
a particoular thx to the super ignorant blackshark support that NEVER GAVE ME A SINGLE ANSWER (THANK YOU JASON FIND ANOTHER WORK)
DO NOT BUY BLACKSHARK


Now the bible:

Installation steps (follow closely)

1 Make a TWRP backup

2 Use a pc or an OTG to save your actual backup

3 Transfer the MR0 Global TWRP BACKUP in the otg(easiest way) or in the internal memor TWRP/Backup/*devicecode*/*date*/(backup files)

4 Restore (unpin recovery to keep TWRP)& WIPE data& internal storage

5 Reboot your phone in recovery after install

6 Install magisk (last version >23 for Android 11) to patch the boot.img

7 Enjoy

8 In case of problems use adb push* command to tranfer the backup files again then do again from point 4

9 In case of bootloop switch the boot from A to B :
-from TWRP->Reboot->Slot
or
-from cmd fastboot "fastboot --set-active=a" then reboot


HOW TO FIX OTA

To OTA update, restore recovery from the backup of the global ROM, then procede with the update using the *#*#1027#*#* method than reflash TWRP via fastboot
trying to dump the recovery from the official ota



10 Optional: to enable SafetyNet w/ Magisk flash this module -->[MAGISK][Module] GAPPS 4 Magisk

*ADB File Transfer setup even from TWRP

First, install Minimal ADB & Fastboot or get the official tools from the Google developer site. I prefer the minimal tools as they contain everything you need in a small installable package, but both will work just fine. If you installed the minimal package, you can simply open this from your Windows search bar. Type:

adb devices

and make sure your device is recognized there.



If you see something like this, you’re good to go.

ADB push​

If you’ve mastered ADB pull, ADB push is easy. It’s the same thing basically. Let’s say I have a file called “goat.jpg” in my root of my C: drive. To push this to the root of my device storage (as in, accessible by my file manager), I simply type:

adb push “C:\goat.jpg” “/sdcard/”

And that’s it! You have now mastered both ADB pull and ADB push!


Download LINKS:

Magisk 23.0 flashable
Global JOYUI 12.5 MR0 Android 11
CN JOYUI 12.5 MR0 Android 11 (no persist)

More useful files:
adb & fastboot [lastest stable]
Twrp MQ3 based
would you please reupload links ?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 6
    1638785480323.png

    ONCE 4 ALL FREE 4 ALL (how it should be...)
    a particoular thx to the super ignorant blackshark support that NEVER GAVE ME A SINGLE ANSWER (THANK YOU JASON FIND ANOTHER WORK)
    DO NOT BUY BLACKSHARK


    Now the bible:

    Installation steps (follow closely)

    1 Make a TWRP backup

    2 Use a pc or an OTG to save your actual backup

    3 Transfer the MR0 Global TWRP BACKUP in the otg(easiest way) or in the internal memor TWRP/Backup/*devicecode*/*date*/(backup files)

    4 Restore (unpin recovery to keep TWRP)& WIPE data& internal storage

    5 Reboot your phone in recovery after install

    6 Install magisk (last version >23 for Android 11) to patch the boot.img

    7 Enjoy

    8 In case of problems use adb push* command to tranfer the backup files again then do again from point 4

    9 In case of bootloop switch the boot from A to B :
    -from TWRP->Reboot->Slot
    or
    -from cmd fastboot "fastboot --set-active=a" then reboot


    HOW TO FIX OTA

    To OTA update, restore recovery from the backup of the global ROM, then procede with the update using the *#*#1027#*#* method than reflash TWRP via fastboot
    trying to dump the recovery from the official ota



    10 Optional: to enable SafetyNet w/ Magisk flash this module -->[MAGISK][Module] GAPPS 4 Magisk

    *ADB File Transfer setup even from TWRP

    First, install Minimal ADB & Fastboot or get the official tools from the Google developer site. I prefer the minimal tools as they contain everything you need in a small installable package, but both will work just fine. If you installed the minimal package, you can simply open this from your Windows search bar. Type:

    adb devices

    and make sure your device is recognized there.



    If you see something like this, you’re good to go.

    ADB push​

    If you’ve mastered ADB pull, ADB push is easy. It’s the same thing basically. Let’s say I have a file called “goat.jpg” in my root of my C: drive. To push this to the root of my device storage (as in, accessible by my file manager), I simply type:

    adb push “C:\goat.jpg” “/sdcard/”

    And that’s it! You have now mastered both ADB pull and ADB push!


    Download LINKS:

    Magisk 23.0 flashable
    Global JOYUI 12.5 MR0 Android 11
    CN JOYUI 12.5 MR0 Android 11 (no persist)

    More useful files:
    adb & fastboot [lastest stable]
    Twrp MQ3 based
    2
    network /camera is ok but can't add fingerprint how to fix it?
    Thx to @wrinkletit

    dial
    *#*#466349#*#*

    then select the first option (the chineese word)
    press start
    at the "Flesh Flat" is press your thumb hard onto the fingerprint sensor, make sure the sensor if fully covered by your thumb
    then at the "Flat Black" is press your thumb with black cloth against the sensor. again make sure fully cover the sensor