CS968 Exclusive MODDED ROM EQS-v2.0M 1080p

[fakotibor]

Strange, because I haven't experienced that issue, playstore gave me no error or warning or caution, antutu benchmark recognizes CS968 as Samsung GT-9300.
Did you installed any programs that relevant with build.prop may be?
Which programs you cannot install, can you give a few names, so I can check it for you.

Some apps:
https://play.google.com/store/apps/details?id=org.zwanoo.android.speedtest
https://play.google.com/store/apps/details?id=com.lidroid.fileexplorer
https://play.google.com/store/apps/details?id=com.sand.airdroid

 

[asalada]

Airdroid also cannot be installed: Not Compatible

Some games cannot run, it stuck such as : Temple Run & Temple Run 2

Tried using Tincore Keymapper but it lags very badly, almost unusable, is it because the screen size?

 

[asalada]

Airdroid also cannot be installed: Not Compatible

Some games cannot run, it stuck such as : Temple Run & Temple Run 2

Tried using Tincore Keymapper but it lags very badly, almost unusable, is it because the screen size?

cAn any1 help me tell me the best rom 720p for cs968

 

[jaygreene24]

CS968 NHL Gamecenter Live

Anyone using NHL Gamecenter Live with this ROM? Just got my CS968 and factory rom would not playback games or any live ones, only play condensed games and always freezes. Just flashed this rom and it will playback full games now but only if I select ALL for kbps. If I change it to anything higher I get the NHL Logo again. Thought it might be a bandwidth issue but I have 25mbps and speedtest.net shows full speed. I'm also connected via ethernet not wifi but tried both. I'm new to this whole thing so not sure what has been changed between the original rom and this new one but it seems like a step in the right direction. I will try a live game tonight and update this thread. Does anyone know why the playback of condensed game and full game are different? It even looks like a different resolution. You would think they would just clip the original broadcast but the condensed playback is definitely a different size screen. Any help is much appreciated...

Live games are now playing but resolution or kbps is low. Picture is very grainy and when you select anything other than AUTO for kbps it goes back to NHL Logo which I believe means the stream player crashes.

 

[lanc3lot]

Hello, ty for the roms, are very nice indeed. Anybody knows a way, to have every time cs968 load in full screen, and not have the "buttons" that appear on the bottom? I know i can minimize that with an air mouse, but i search for a more permanent solution.

Ty

 

[BRICK0044]

Hello, ty for the roms, are very nice indeed. Anybody knows a way, to have every time cs968 load in full screen, and not have the "buttons" that appear on the bottom? I know i can minimize that with an air mouse, but i search for a more permanent solution.

Ty

There is an app called Fullscreen that will do it but you have to be rooted.

 

[EQUANCY]

Some apps:
https://play.google.com/store/apps/details?id=org.zwanoo.android.speedtest
https://play.google.com/store/apps/details?id=com.lidroid.fileexplorer
https://play.google.com/store/apps/details?id=com.sand.airdroid

Yes you it is strange but true, however I think its not about spoofing, I assume these apps needs special permisions which our device can not provide.
I'm not sure about that but what ever you change device name, market doesn't allow to install these progs.
How ever you can install them from external source.

Airdroid also cannot be installed: Not Compatible

Some games cannot run, it stuck such as : Temple Run & Temple Run 2

Tried using Tincore Keymapper but it lags very badly, almost unusable, is it because the screen size?

I didn't tried with Temple run series but Blueput works well with Subway surfer, but not awesome at all

Anyone using NHL Gamecenter Live with this ROM? Just got my CS968 and factory rom would not playback games or any live ones, only play condensed games and always freezes. Just flashed this rom and it will playback full games now but only if I select ALL for kbps. If I change it to anything higher I get the NHL Logo again. Thought it might be a bandwidth issue but I have 25mbps and speedtest.net shows full speed. I'm also connected via ethernet not wifi but tried both. I'm new to this whole thing so not sure what has been changed between the original rom and this new one but it seems like a step in the right direction. I will try a live game tonight and update this thread. Does anyone know why the playback of condensed game and full game are different? It even looks like a different resolution. You would think they would just clip the original broadcast but the condensed playback is definitely a different size screen. Any help is much appreciated...

Live games are now playing but resolution or kbps is low. Picture is very grainy and when you select anything other than AUTO for kbps it goes back to NHL Logo which I believe means the stream player crashes.

I'm assuming that you talking about somekind of "Live Stream" and you wanna watch it smoothly.
This is a particular application, and it may not be fully compatible with our device.
However...
If this program doesn't use its own embedded player then you can try BSPlayer, or Wondershare player (For me this is the best player for streaming) or else.
I'm sorry I can't help too much, cause I do also not know much about it.

Hello, ty for the roms, are very nice indeed. Anybody knows a way, to have every time cs968 load in full screen, and not have the "buttons" that appear on the bottom? I know i can minimize that with an air mouse, but i search for a more permanent solution.

Ty

I suppose you need to disable soft buttons, for that you must add this lines to build.prop and restart.

End of this section...

#
# ADDITIONAL_BUILD_PROPERTIES
#

"qemu.hw.mainkeys=1"

But remember: You'll loose power off option from that menu too.

I hope this helps.

----------------------------------------------------------->

For now, I have still no time to try to some extras/changes/additions/fixes with this rom, very busy.
Sorry for difficulties, may be troubles that you getting from this modified firmware, it is imperfect but works fast and stable ( at least on most cases ).

Regards.

 

[fakotibor]

Yes you it is strange but true, however I think its not about spoofing, I assume these apps needs special permisions which our device can not provide.
I'm not sure about that but what ever you change device name, market doesn't allow to install these progs.
How ever you can install them from external source.

I did.I installed on my Galaxy S Advance and from it I saved the app with Airdroid. Then installed to the tvbox.

 

[psycmos]

EQUANCY you know some app that do sleep timer? :d i use xbmc a lot and sleep timer will be wonder app

I really apreciate your work, need more people like you programming android and update the defauts firmware thanks a lot

 

[Delta_07]

Hi again,

I'm not quite sure if the following is ment to be posted in this thread... but anyway:
I just tried to get the RKBatchTool recognize my Cloudnet CR11/s. I used the RKBatch package v1.7 with the RockChip Drivers 3.5 and installed them after connecting the CR11/s in reset mode (or whatever it is called) for Win7 x64. "Connect to PC" is disabled and "USB Debugging" is enabled. In my "Device Manager" the CR11/s is shown as "Rockusb Device" in the device group "Class for rockusb devices". Still the RKBatchTool didn't recognize my CR11/s (not even when I grand it administrative rights)... I tried it on my Desktop-PC and my Notebook but the result was the identical.

I would be thankful for any idea concerning my issue.

Have a nice day

 

[EQUANCY]

EQUANCY you know some app that do sleep timer? :d i use xbmc a lot and sleep timer will be wonder app

I really apreciate your work, need more people like you programming android and update the defauts firmware thanks a lot

Hi,
Your welcome :good:
Actually I'm not a linux programmer, just have some knowledge about it.
For the sleep&wake-up I'll look it for you.

Hi again,

I'm not quite sure if the following is ment to be posted in this thread... but anyway:
I just tried to get the RKBatchTool recognize my Cloudnet CR11/s. I used the RKBatch package v1.7 with the RockChip Drivers 3.5 and installed them after connecting the CR11/s in reset mode (or whatever it is called) for Win7 x64. "Connect to PC" is disabled and "USB Debugging" is enabled. In my "Device Manager" the CR11/s is shown as "Rockusb Device" in the device group "Class for rockusb devices". Still the RKBatchTool didn't recognize my CR11/s (not even when I grand it administrative rights)... I tried it on my Desktop-PC and my Notebook but the result was the identical.

I would be thankful for any idea concerning my issue.

Have a nice day

Did you followed this guide, USB debugging mode isn't necessary to do.
and you must use right usb connector labelled HOST.
Try again while following my guide and report if it didn't help.
Have a nice day.

 

[Delta_07]

Hi,
Your welcome :good:
Actually I'm not a linux programmer, just have some knowledge about it.
For the sleep&wake-up I'll look it for you.



Did you followed this guide, USB debugging mode isn't necessary to do.
and you must use right usb connector labelled HOST.
Try again while following my guide and report if it didn't help.
Have a nice day.

Hi, thanks for your reply,

I used the USB-Port next to the Micro-SD slot labeled: OTG and I took you guide :-S
I remember similar problems when trying to root/flash my HTC OneX or Tramsformer Pad Infinity. Those where solved by installing the full HTC / ASUS Software Suit for those devices (at first I always tried to install only the USB driver without these blown up suits...). What confuses me is that Windows7 seems to register the device as it should, but still the RKBatchTool doesn't respond to the connected device at all.

 

[EQUANCY]

Hi, thanks for your reply,

I used the USB-Port next to the Micro-SD slot labeled: OTG and I took you guide :-S
I remember similar problems when trying to root/flash my HTC OneX or Tramsformer Pad Infinity. Those where solved by installing the full HTC / ASUS Software Suit for those devices (at first I always tried to install only the USB driver without these blown up suits...). What confuses me is that Windows7 seems to register the device as it should, but still the RKBatchTool doesn't respond to the connected device at all.

If you have good pc, I mean can handle Virtual machine then you may try with VMWare or Virtualbox with clean windows installation or linux.

Removing all of RKxxx drivers and also USB drivers from system and reinstalling chipset drivers afterward Rk31xx drivers is also an opinion.

Hope this helps.

 

[Delta_07]

If you have good pc, I mean can handle Virtual machine then you may try with VMWare or Virtualbox with clean windows installation or linux.

Removing all of RKxxx drivers and also USB drivers from system and reinstalling chipset drivers afterward Rk31xx drivers is also an opinion.

Hope this helps.

Ok I think reinstalling the USB-System-Drivers is what I'm going to try. Would you prefere USB 2.0 or USB 3.0. Concerning a USB 2.0 device I assume that the answer is quite clear, but perhaps there's something I miss.

My PC should be able to handle VMWare (please excuse my showing off at this point xD):
I7-4770K
Asus Maximus 6 Formula
16 GB DDR3 Cosair RAM
Asus HD7970GHz
Crucial M4 SSD

But setting up a new Windows is a bit annoying (did this about 25 times in the last 4 Months...). Aside from this PC I have two quite fresh Ubuntu 13 Notebooks available. Is there a different tutorial for flashing a ROM via Linux?

Have a nice da... weekend:good::laugh:

 

[EQUANCY]

Ok I think reinstalling the USB-System-Drivers is what I'm going to try. Would you prefere USB 2.0 or USB 3.0. Concerning a USB 2.0 device I assume that the answer is quite clear, but perhaps there's something I miss.

My PC should be able to handle VMWare (please excuse my showing off at this point xD):
I7-4770K
Asus Maximus 6 Formula
16 GB DDR3 Cosair RAM
Asus HD7970GHz
Crucial M4 SSD

But setting up a new Windows is a bit annoying (did this about 25 times in the last 4 Months...). Aside from this PC I have two quite fresh Ubuntu 13 Notebooks available. Is there a different tutorial for flashing a ROM via Linux?

Have a nice da... weekend:good::laugh:

Indeed you have a strong pc
Installing windows on a virtual machine takes not much time (for me 20-30 minute) and if you keep the virtual windows clean you can use it allways, I suggest you to use Virtual box or VMWare.

I'm using kubuntu 13.1 virtually, but didn't flashed via linux however If you install drivers on ubuntu correctly then you can flash easily but needs some "How to do" knowledgeand a bit experience.

There is a guide for you for flashing RK3xxx devices under Linux system [External-Link to CNX software web site].

Its not my work, done by a CNX-Software self
Thanks to their guide you can understand flash your device.

Success :good:
...and good weekends.

 

[Delta_07]

Indeed you have a strong pc
Installing windows on a virtual machine takes not much time (for me 20-30 minute) and if you keep the virtual windows clean you can use it allways, I suggest you to use Virtual box or VMWare.

I'm using kubuntu 13.1 virtually, but didn't flashed via linux however If you install drivers on ubuntu correctly then you can flash easily but needs some "How to do" knowledgeand a bit experience.

There is a guide for you for flashing RK3xxx devices under Linux system [External-Link to CNX software web site].

Its not my work, done by a CNX-Software self
Thanks to their guide you can understand flash your device.

Success :good:
...and good weekends.

Ok out of a strange reason flashing worked with a friends' notebook. I tried a Pre-Rooted Stock ROM for the beginning and it worked fine (most importantly AdBlocking!). Still I can't wait to get the 5MP version of your ROM.

Have nice day

 

[fakotibor]

vsync fix

Hi EQUANCY,

In the next rom can you make a vsync fix? :angel:
Source:
http://www.freaktab.com/showthread.php?7150-rkpatchomatic-tool-overclock-vsync-fix-any-binary-rk3188-kernel!

Thanks a lot for your work.:good:

 

[EQUANCY]

Hi EQUANCY,

In the next rom can you make a vsync fix? :angel:
Source:
http://www.freaktab.com/showthread....overclock-vsync-fix-any-binary-rk3188-kernel!

Thanks a lot for your work.:good:

It is kernel releated thing, well possible.
I'm going to try asap these kernels and choose the best one for our devices and I want some overclocking on our devices, but may be you also aware of that our tvboxes equipped with lower/cut version of Rk31xx soc, called Rk3188-T.
Which means there is not much OC possibility and need test, and that takes time.

I actually waiting for new firmware from factory, may be we can get a Kitkat rom, there is already Kitkat SDK for RK3xxx devices but not optimised for CS968.

And we have other issues, such as Board differences.
there are 3 models with small changes (Wifi and bluetooth) and 2 and 5 mpx versions is other question.

So, lets wait and see a bit time more what comes next...

-> Delta_07
I'll try to compile a multi-platform rom for both camera versions, I don't think it is a big deal, but it needs some research and time.
And above issues also applied for 5mpx version (board numbers).
But as I said before, not a big deal.

Have a nice day guys.

 

[fakotibor]

It is kernel releated thing, well possible.
I'm going to try asap these kernels and choose the best one for our devices and I want some overclocking on our devices, but may be you also aware of that our tvboxes equipped with lower/cut version of Rk31xx soc, called Rk3188-T.
Which means there is not much OC possibility and need test, and that takes time.

I actually waiting for new firmware from factory, may be we can get a Kitkat rom, there is already Kitkat SDK for RK3xxx devices but not optimised for CS968.

And we have other issues, such as Board differences.
there are 3 models with small changes (Wifi and bluetooth) and 2 and 5 mpx versions is other question.

So, lets wait and see a bit time more what comes next...

Have a nice day guys.

The vsync fix is important if you can do it (fixes frame skipping during video playback). The overclocking is not important.

 

[psycmos]

Hi EQUANCY !!

You are informed about that?

DVB-T Support On Your ROM

I'm interesting to buy one of this little things for use with our CS968.

Can you support this in your rom?

If yes what's will be models that you think will support on your rom?
Can you advise me one?

Hehehehehehe

Android is fantastic!! this item will solve my problem as turn our CS968 one GREAT TV BOX

Cheers