CS968 Exclusive MODDED ROM EQS-v2.0M 1080p

Search This thread
By:
Advanced…
D

dbjc

Senior Member
Nov 20, 2009
165
24
@OP, it appears that you do not have more time to spend on building this ROM again.
(No more news from you)

So far your ROM is the only one that brought native 1080p to my CS968 HTC T018 V4 device; even Android 4.4.2 based firmwares cannot put my device into native 1080p. But still, WiFi + Bluetooth do not work.
Please OP, let us continue to work on building new compatible versions of your ROM for newer devices like the one I have. CS968 is not dead!
If you have no more time to spend on this ROM, then please turn it open by giving us the tools you used to build it, thus we can build new versions more compatible with our models.
 
  • Like
Reactions: psycmos
P

PookDS

New member
Jun 9, 2017
1
1
Hi, i know this thread has been down for almost three years, but i really need to know if somebody still has this firmware, because the links are down and i can't find it anywhere :(
Thank you in advance :)
 
  • Like
Reactions: psycmos
C

chenrp

Senior Member
Oct 17, 2006
1,290
153
there is a way of running kodi 17 on this cs968...
EBMC!
cool device still works good.

any new FW for it? someone can recommend?
 
V

voodo1

New member
Sep 21, 2018
1
0
htc-t018-v5 20140214

is there a fully functional rom for this model htc-t018-v5 20140214 and how to install it?
 
You must log in or register to reply here.

Similar threads

tariq2kn
CS968 - Android 4.2, Quad Core, 2Gb RAM, 8GB ROM, Bt 4.0, 2MP Cam, Mic, AV.
Replies
166
Views
104K
V
vinaldo7
EQUANCY
CS968 Exclusive MODDED ROM EQS-v1.0 ~ v1.1 [1080P SUPPORT]
Replies
25
Views
15K
T
thamdo
lewy20041
MK888/K-R42/CS918/MK908/MK908II/T428/MinixX7 Hybrid Firmware (HFW) 15/09/2013
Replies
152
Views
189K
T
tclough
C
[ROM][5.0.2] Unofficial CyanogenMOD 12 for MK808B-Plus - WeTek Gift
Replies
192
Views
176K
D
Daniel Smedegaard Buus
7
CS918/MK888/K-R42 Startup/boot problem
Replies
24
Views
61K
E
egtalaue

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 8
    EQUANCY
    EQUANCY
    Exclusive MODDED ROM EQS-v2.0M
    CS968     a RK3188 ChipSet Based TVBoX
    AKA: TV01 [GeekBuying] CR11s [CloudNET2GO]

    THIS VERSION HAS NATIVE 1080P KERNEL, NOT SAME AS V1.

    IMPORTANT INFORMATION:
    WE JUST LEARNED THERE ARE A FEW CS968/TV01/CR11s MODELS equipped with different WIFI/BT MODULES.
    Thanks to dFenix we figured this out. [More info]

    THIS ROM IS FOR AP6210 WIFI CHIP bundled devices, MAINBOARD VERSION 2.
    So if you try this rom on other models you may loose your wifi connection.
    Click to expand...
    Click to collapse
    IMPORTANT NOTICE:
    THIS IS KIND OF BETA/ALPHA FIRMWARE OR WHATEVER YOU WANT TO CALL IT.
    CURRENTLY I HAVE EXPERIENCED NONE PROBLEM AND IT SEEMS EVERYTHING INCLUDING 1080P MODE WORKS FINE.
    THIS IS AN EXCLUSIVE ROM BECAUSE THERE ARE A FEW THINGS FACTORY FIRMWARE HAS NOT.
    SYSTEM IS SAME AND NOTHING HAS BEEN MODIFIED EXCEPT SUPERUSER and BUILD.PROP, SO IF THERE IS A BUG THEN THAT IS FIRMWARE RELATED THIS ISN'T SUPER DUPER FIRMWARE AND DOESN'T HAVE SPECIAL KERNEL OR RECOVERY, EVERYTHINGS IS STOCK    .
    NOTE : LIBMEDIA.SO REPLACED, READ BELOW...

    Factory Date : 09-12-2013 from CloudNET based CR11/s
    Modification Date: 21-12-2013

    NOTICE: THIS IS FOR 2 MPX VERSION, NOT FOR 5 MPX
    You may harm your device, if you flash this firmware to 5 mpx camera version.

    LCD Display density has been set to 240, if you need smaller icons and texts you can easily change by using preinstalled DPI changer program (May need root permission after first start).



    Features:
    Rooted [ You may notice a bit difference than v1 version, but it is normal ]
    Build tweaks

    • TCP Tweaks (Buffering etc...)
    • Networking Tweaks
    • Wifi Tweaks (Signal etc...)
    • Multimedia Tweaks
    • Streaming Tweaks
    • HW Video Acceleration by default
    • Spoofed as Galaxy S3
    • Date format set to European
    • Timezone Europe GMT +1
    • Renewed bootanimation
    • Renewed wallpaper
    Add: SuperSU.apk (Updated)
    Add: LuckyPatcher (Updated)
    Add: RootBrowser (NEW)
    Add: OGYoutube with downloader [ Original YouTube still can be apartly installed ]
    Add: Dolphin Browser 10.1.2
    Add: Android Weather
    Add: JetAudio
    Add: Blueput Droid (NEW)
    Add: Texdroider DPI (NEW)
    Add: BSPlayer FREE (NEW)
    Add: Cifs Manager (NEW)
    Add: ESFile Explorer (NEW)
    Add: Patched Libmedia.so (Many thanks hillyu from FreakTab, More info)
    Updated : AddAway (Update)
    Removed : All of useless chinese media stuff
    Removed : Chrome
    Removed : Search Box
    Removed : Google Stuff (Search, maps, gmail, talk)
    Removed : Email
    Removed : XBMC Installer (Not everyone's taste)
    Removed : A few more crap...
    Exclusive test modules : Tun, Cifs*, NFS, NTFS and Xpad these modules are not installed by system, must be done manually from console/terminal.
    Included CIFS MANAGER can do it for you, you don't need to install from terminal.
    Exlusive bootanimation (Renewed)
    Good working Remote Control.
    Faster Internet browsing, smoother streaming, Very nice playing 1080p media from NAS DRIVE

    *: It seems cifs module won't work properly, it is interesting because it was allright with K-R42 device but I'll search for it.

    v2.0M CHANGES
    NEW*: MultiWindow
    *Needs Xposed Framework to be installed completely.
    NEW*: Xposed Framework Installer
    *Installation must be done via program self, then after reboot you may download modules as much as you want
    REPLACED : BSPLAYER-> MX PLAYER FREE - No Codec pre-installed
    REMOVED :     JETAUDIO
    UPDATE : LUCKY PATCHER, ADAWAY
    UPDATE : DOLPHIN BROWSER 10.2.1
    Re-Add : RKVideo player, RKExplorer
    A few fixes that causes problems.
    More optimized video playback (about 40 mbps mkv from network drive), more stable system.
    LCD Density set to : 160 (Smaller icons and texts by default)
    A little bit faster than 2.0 version.

    Feel free to test or build new one, no words for future updates or versions etc.

    FLASH WITH YOUR OWN RISK, I'M NOT RESPONSIBLE FOR ANY DAMAGE CAUSED BY FLASHING OR AFTER.



    AnTuTu Results



    Devhost / Mirror
    password :     cs968eqs

    Firmware flashing guide.

    [ HD QUALITY BOOT ANIMATIONS... ]http://forum.xda-developers.com/showthread.php?t=2612221
    View
    3
    EQUANCY
    EQUANCY
    Here I write a simple guide for you, I'm assuming you are using windows xp or higher...

    Step 1 [ Preparing ]

    First download RK-Batchtool and drivers, unzip them a location where you can find easily, Example : C:\Rk311 or so, and also download firmware image here so you don't need to search for it.

    Now power off your device, you don't need to set USB debugging mode or so, not necessary...
    You need an USB cable with both sides full size (Type-A)
    There is a reset hole a side of the device, just by USB ports.
    And the opposide side you'll see one of USB ports as HOST port there is also label and MicroSD socket, this port you must use.
    Connect your usb cable to this port but not to pc yet.

    You don't need AC adapter to be connected, USB is enough.

    Step 2 [ Flashing ]

    1. While holding reset button connect your device to your PC, install necessary drivers and open RKBatch Tool.
    2. If you connected your device properly then you' ll see one of the ports Green.
    3. Select rom which you want to flash while clicking Browse.
    4. If it is correct rom then you'll see some information about roms then click Restore,
    5. If not then you'll receive an Error message choose correct rom then try again and next to 6..
    6. Wait for erasing device memory...
    7. Your device will reboot (DO NOT PLUG-OUT)
    8. After reboot RK-Batchtool goes to start flashing firmware to your device, wait till ends.
    9. After flashing new firmware will be checked for sure, after %100 your device will be restarted then you may plug it out.
    Look at the attachment you can see how it is looks like if you did everythings correctly.


    Hope this guide helps.


    Success... :good:
    View
    2
    EQUANCY
    EQUANCY
    dFenix said:
    As promised pictures spread board.
    It shows that the board revision number 3 and Mediatek chip costs
    may be due to the fact that the chip is not AP6210, and Mediatek.
    Click to expand...
    Click to collapse

    Your device is different than ours, WIFI module is another brand, so another drivers and modules are necessary.

    V2: AP6210
    V3: MT5931 Wifi and MT6622     bluetooth

    You need specific firmware for your device, because these drivers must be initialized at boot time.

    Sorry but this rom is not for you.
    View
    2
    EQUANCY
    EQUANCY
    Delta_07 said:
    Well even if the ported ROM does not work, there are two possibilities (correct me if I'm wrong):

    1. Software isn't working with my hardware which can be solved by flashing a stock or different ROM
    2. Hardware gets damaged through "wrong" or incompatible software (worst case) and device turns into salvage...

    Taking a look at the company CloudNet I tend to believe that they wouldn't go through the trouble of using a different hardware "layout" (except perhaps a different camera) to upgrade there device by nothing else then 3MP... therefore my amateur expectation is that the ROM should work more or less fine.
    Or did I miss something important?
    Click to expand...
    Click to collapse

    Probably this firmware will work on your device (except camera), but your device may also not boot again...
    However, I think it can still be recoverable while flashing its original firmware.
    But, it is risky and yes your device may become unrecoverably damaged.

    I have also firmware of 5 mpx version, as I said before I can mod it later (Weekend), this will be harmless and won't damage your device.
    But, I can't test it and I may not be able to see its working good or bad, even is rooted or not.

    fakotibor said:
    I've got my TV01. I flashed this rom, and for now everything is all right.
    Nice work and big thanks. :good:
    Click to expand...
    Click to collapse

    Your welcome.
    View
    2
    EQUANCY
    EQUANCY
    dFenix said:
    I hope this information will warn others of this problem.
    I think it is necessary to specify in the header of your theme.
    Firmware great pity is not suitable for us (
    Be able to finalize it for us if I can get a dump of firmware V.3 board?
    Or even try to supplement only driver module for Wi-fi and BT if possible.
    Thank you!
    Click to expand...
    Click to collapse

    I didn't know anything about 3rd version of wifi, but I'll put it information at first post.

    I've figured out both kernel modules have been supplied in firmware, only difference is initialisation of drivers.
    I think you can test WIFI, if you still have my firmware on your device.

    Set WI-FI state OFF and
    Try this commands from terminal.

    Code: 
        su
    chmod 0644 /system/lib/modules/mt5931.ko
    insmod mt5931.ko

    Try to turn WIFI-ON if won't work then you need your own drivers and modules so this is very complicated.
    View

New posts