Custom ROM/Kernel for Samsung Galaxy Mini (GT-S5570)

Search This thread

genieass

Senior Member
Aug 11, 2011
185
16
Kochi
how to use miui?
may i customize it for galaxy mini ?

Is MIUI for GT S5570 available?? Have not seen any announcement so far.

But if you do customise it for this phone, I am certain to try it out. :-D

Can't we use ROM Manager for Flashing ROM & Kernel?

1. ROM manager is now part of the unofficial 7.1 CM ROM for this phone; I still do not not have the courage to try it out.

2. Last time I tried ROM manager (from the market), it hard bricked my phone. (Had to send to the service center, who replaced the mobo).

I am waiting for a post from somebody who has successfully used ROM manager for this phone.

Edit:- ROM Manager now supports GT S 5570. Just ensure that the app (download from Market or elsewhere) does show your phone. Do not click on any other model name - if shown. FInd a download link on this forum itself. Have not tried yet though.
 
Last edited:

adistf

Senior Member
Jun 9, 2011
326
92
30
Craiova
www.facebook.com
Is MIUI for GT S5570 available?? Have not seen any announcement so far.

But if you do customise it for this phone, I am certain to try it out. :-D



1. ROM manager is now part of the unofficial 7.1 CM ROM for this phone; I still do not not have the courage to try it out.

2. Last time I tried ROM manager (from the market), it hard bricked my phone. (Had to send to the service center, who replaced the mobo).

I am waiting for a post from somebody who has successfully used ROM manager for this phone.

Edit:- ROM Manager now supports GT S 5570. Just ensure that the app (download from Market or elsewhere) does show your phone. Do not click on any other model name - if shown. FInd a download link on this forum itself. Have not tried yet though.


lol it's working,i have tried it when i had my galaxy mini,i succefully flashed CWM 5.0.3 and CM7 :-J
 

TheWhisp

Inactive Recognized Developer
Jun 25, 2011
3,756
10,928
No, ICS source is not yet released. The Galaxy Nexus whole ROM has been released.
 

fordawin

Member
Oct 8, 2011
30
1
i've tried it , it went succesfully in odin but I'm stuck at the SAMSUNG screen when it's starting, why?
 

orieoke

Senior Member
Sep 16, 2011
152
49
YK - ID
orie1212.wordpress.com
Can we do this for Any Custom ROM?

Can I do this for Custom ROM with based on firmware XXKPK??
Details:
I flashed with XXKPK firmware, then
Installed Minimod X Final Custom ROM.

NOTE: Me are not responsible any problems caused by installed kernels.

So, Do it at your own Risk..!

For flashing this kernel is need the root access, because it will use SetCPU or similiar tool for managing the frequency.

Step:
1. Download the needed file --> TASS_OC.7z
2. Extract TASS_OC.7z
3. Run S5570_Odin Multi Downloader v4.38.exe
4. Click OPS button and choose TASS_v1.0.ops
5. Clink PDA buton and choose CODE_S5570DXKA8_REV02_OC.tar.md5
6. Power up Phone to Download Mode (Center key + Vol Down key + Power key)
7. After Odin detected the Phone, Click Start button
8. Wait for flashing process is finnished, and install SetCPU or similliar tool.

After that, you can configure the frequency...

For back to stock kernel, the step is same as above. but you choose the CODE_S5570DXKA8_REV02.tar.md5 for PDA.

Note: If the phone is hang or reboot, choose the lower frequency until you find the stable frequency.

I can play AngryBird RIO very smooth on 825MHZ with Performance for Scaling profile..

Just press Thanks button if you like my compiled kernel.. :)
 

Top Liked Posts

  • There are no posts matching your filters.
  • 46
    NOTE: Me are not responsible any problems caused by installed kernels.

    So, Do it at your own Risk..!

    For flashing this kernel is need the root access, because it will use SetCPU or similiar tool for managing the frequency.

    Step:
    1. Download the needed file --> TASS_OC.7z
    2. Extract TASS_OC.7z
    3. Run S5570_Odin Multi Downloader v4.38.exe
    4. Click OPS button and choose TASS_v1.0.ops
    5. Clink PDA buton and choose CODE_S5570DXKA8_REV02_OC.tar.md5
    6. Power up Phone to Download Mode (Center key + Vol Down key + Power key)
    7. After Odin detected the Phone, Click Start button
    8. Wait for flashing process is finnished, and install SetCPU or similliar tool.

    After that, you can configure the frequency...

    For back to stock kernel, the step is same as above. but you choose the CODE_S5570DXKA8_REV02.tar.md5 for PDA.

    Note: If the phone is hang or reboot, choose the lower frequency until you find the stable frequency.

    I can play AngryBird RIO very smooth on 825MHZ with Performance for Scaling profile..

    Just press Thanks button if you like my compiled kernel.. :)
    18
    This is the lover overclock kernel:

    View attachment CODE_S5570_KRNL_OC.tar.md5.7z

    Max. at 806MHz and automatic set to 600MHz at booting (to prevent boot fail)

    Just press thanks button if you like it..! :D
    6
    I have to start developing the kernel, for the custom rom is not yet.

    For now i focusing to overclock and add more feature in kernel.

    The progress until now is i can get stable on 800mhz.

    Sent from my Ideos
    5
    Yet another ROM for Galaxy Mini :D

    Recompiled kernel to support ext 3/4, tun/tap, cifs, swap (sorry not overclock)
    Pre-rooted
    ADB as root
    Busybox, tune2fs, mke2fs, and e2fsck commands (via adb) on recovery
    init.d support
    Added script to format SD card 2nd partition to Ext4
    Filesystem check before mounting in place
    system, data, cache partitions converted to ext4
    DT's a2sd 2.7.5.2-1 (please notes below)
    Uncommented install-recovery.sh (for people using link2sd, please see notes below)
    New bootanimation
    Removed startup sound
    CRT animation when turning off screen (to enable, go to Settings>Display>Animation and select 'All animations')
    Custom theme ==> courtesy of our Galaxy Ace friends http://forum.xda-developers.com/forumdisplay.php?f=1168
    Reboot, Recovery and Download shotrcut on Power Option
    myfiles replaced with rootexplorer, touchwiz replaced with zeam
    Google apps removed (see attached apks to re-install)
    OpenVPNSettings (inlcuding binary), Screenoffandlock, and CifsManager pre-installed
    Changed default language to English

    Pre-install Notes:
    This is based on the Android 2.3.4 Europe firmware from samfirmware.com (S5570XXKPI_SERKPI_XXKPI). So if that firmware does NOT work for you, DO NOT flash this one.

    FLASHING DISCLAIMER APPLIES!

    1. Backup! Backup! Backup!
    2. Download and unzip file http://www.gamefront.com/files/20518220/S5570_GB_MOD.tar.zip
    3. Flash as 'One Package' using Odin
    4. Done!

    Additional Notes:
    The "can't mount....." error in recovery mode is normal. Just ignore it.
    Wiping data or cache in recovery will reformat BOTH data and cache partitions. So please be careful if you wish to wipe cache partition only BECAUSE IT WILL WIPE DATA ALSO
    Minor issue with the custom theme ==> Menu fonts are not visible on some apps. If you want to revert to stock theme, apply attached Stock_Theme.zip as an update zip

    Darktremor a2sd and Link2sd Notes:
    Do not use BOTH at the same time. Either you use a2sd only or link2sd only. DT a2sd mounts 2nd partition in /system/sd while link2sd in /data/sdext2. Default mount is a2sd. So if you want to use link2sd over a2sd you need to disable a2sd's mounting by executing the command below as root -

    chmod 640 /etc/init.d/00-sdmount

    Some screenshots -

    image2.bmp.jpg


    image1.bmp.jpg


    image4.bmp.jpg


    SC20110705-225455.png


    SC20110705-222529.png


    SC20110705-222735.png
    3
    same here dude, confuse to make custom boot animation work on my mini, please anyone to share your file/tut in here :)

    OK. For those who want to enable bootanimation, here is how it's done -

    Since bootanimation is disabled in init.rc, we will use samsungloop instead :D

    Code:
    service media /system/bin/mediaserver
        user media
        group system audio camera graphics inet net_bt net_bt_admin net_raw
        ioprio rt 4
    
    #service bootanim /system/bin/bootanimation
    #    user graphics
    #    group graphics
    #    disabled
    #    oneshot
    
    service samsungloop /system/bin/samsungloop
        user graphics
        group graphics
        disabled
        oneshot

    1. Using any root explorer app, rename (or delete, just make sure you have a backup) the 'samsungloop' file to located in /system/bin
    2. Rename the file 'bootanimation' (also located in /system/bin) to 'samsungloop'
    3. Now put the bootanimation.zip of your choice in /system/media folder

    Done! Enjoy ;)