so, Ive wanted a magnetic car dock for a while. Airdock makes a nice one. but the airdock 2 is not available. at least last time i checked. So i decided to make one. this has been an on going project for about a month. the first one i made was quite simple. very much like the one on youtube. just 4 magnets placed in a LG charging pad. problem was, the charging would start and stop randomly. I assumed it had to do with the magnet locations. some how it was effecting the charging (considering Qi charging is magnetic)
back to the drawing board! and then project after project lol. I think i must have made 8 docks. all had issues and I was not satisfied. I even made one out of carbon fiber, or an attempt to! didnt turn out well.. then I went a bit out side of the box. so heres what i did
First, i had an extra Turbo battery cover. i plastic dipped that. my theory was plastic dip would work as a release agent for my next step. then I took an old iphone bumper case my wife had and used that as my frame.. alined 4 magnets next to the moto symbol (i put 2 small peaces of metal in that area in side the phone) then i used tap to cover all the gaps the case would have on the phone, and poured in a full tube of plastic weld epoxy. I had no clue what would happen but i was willing to try!
after everything cured it worked really well.. I was able to take the epoxy off the phone cover fairly easly (you can see it pulled off some of the vz and droid writing.. as well as the moto symbol)
now, i have a form that matches the turbo exactly.
the next step was just a mater of sanding and cutting off any of the over pour and any imperfections in the epoxy.
then i put in the wireless charging pad
next, i plastic dipped the front (being rubber it works really well as a non slip surface)
then i warped the outside in some auto chrome trim
and that was that! new charging dock for my car that fits like a glove! because it matches the turbos curves, it auto centers it self. and holds super tight! phone wont move at all... very happy with the out come.. let me know what you guys think! thanks
back to the drawing board! and then project after project lol. I think i must have made 8 docks. all had issues and I was not satisfied. I even made one out of carbon fiber, or an attempt to! didnt turn out well.. then I went a bit out side of the box. so heres what i did
First, i had an extra Turbo battery cover. i plastic dipped that. my theory was plastic dip would work as a release agent for my next step. then I took an old iphone bumper case my wife had and used that as my frame.. alined 4 magnets next to the moto symbol (i put 2 small peaces of metal in that area in side the phone) then i used tap to cover all the gaps the case would have on the phone, and poured in a full tube of plastic weld epoxy. I had no clue what would happen but i was willing to try!
after everything cured it worked really well.. I was able to take the epoxy off the phone cover fairly easly (you can see it pulled off some of the vz and droid writing.. as well as the moto symbol)
now, i have a form that matches the turbo exactly.
the next step was just a mater of sanding and cutting off any of the over pour and any imperfections in the epoxy.
then i put in the wireless charging pad
next, i plastic dipped the front (being rubber it works really well as a non slip surface)
then i warped the outside in some auto chrome trim
and that was that! new charging dock for my car that fits like a glove! because it matches the turbos curves, it auto centers it self. and holds super tight! phone wont move at all... very happy with the out come.. let me know what you guys think! thanks
