You misunderstood my post. I am talking about the headphone jack, not Bluetooth but wired headphones.
Accessories CustomAP 2022
- Thread starter tom.android
- Start date
I never used Bluetooth with Sony. Used only wired.
Try to setup GSI here
-Samsung features
Enable stereo audio mode
Enable extra sensors
-Misc features
Use alternate way to detect headsets
Disable audio effects
and reboot
So yours doesn't output sound along with the speakers? Anything specific I need to setup at the phh settings? I only know how to fully fix Bluetooth but never managed to do the same for wired audio.
Try it ..will work . I only uses Bluetooth with Samsung buds 2 only. Sony with wired.
Edit: For some reason I did not see your Edit two posts above. Thanks. I shall now compile a ROM the old way and flash it through Odin.
Last edited:
Ah Wavelet. I stuck with JamesDSP and the Dolby mod. Thanks, I shall test in several hours.
How to install GSI PIXEL EXPERIENCE PLUS WITH TWRP Fastboot.
(Pixel Experience GSI Plus 12.1 v414 )
Note v.415 BUG NOT BOOT FROM MEDIATEK
https://github.com/ponces/treble_build_pe/releases
Pixel Ex plus boot on my Tab a7 lite.
(Pixel Experience GSI Plus 12.1 v414 )
Note v.415 BUG NOT BOOT FROM MEDIATEK
https://github.com/ponces/treble_build_pe/releases
Github Coxxs/hide-tablet-taskbar
Magisk module for fix tablet Taskbar.Pixel Ex plus boot on my Tab a7 lite.
Last edited:
can you upload the vbmeta file that you used?How to install GSI PIXEL EXPERIENCE PLUS WITH TWRP Fastboot.
(Pixel Experience GSI Plus 12.1 v414 )
Note v.415 BUG NOT BOOT FROM MEDIATEK
https://github.com/ponces/treble_build_pe/releases
Github Coxxs/hide-tablet-taskbar
Magisk module for fix tablet Taskbar.
Pixel Ex plus boot on my Tab a7 lite.
I am doing all the steps, but it stays stuck on the TWRP (it is booting again and again to TWRP).
Is there any other step to do?
I am trying to install GSI PE for sm-t225n, which pixel experience version should I use?
thx!
Last edited:
<<<< Note PE v.415 BUG NOT BOOT FROM MEDIATEK>>>>
Easy & Quick RESTORE FROM (Any GSI) BACK TO (STOCK with TWRP)
!!! If you are already on the A11 (Pure Stock)!!! Bootloader unlocked.
!!! IF CAME FROM "SOFT BRICKED"
(Forced Restart to Download mode.)--from system failure
Press key combo ( Power + vol up + vol down ) until blank screen then release power button but still press and hold ( Vol up + Vol down ) + connect USB cable to Computer. ( Download mode)
0. Download the actual FW A11 with Frija or samfirm or Bifrost, and extract
it and you will get 5 files (AP, BL, CP, CSC and HOME_CSC). All files are in tar format and can be opened by 7-Zip, WinRAR or other software.
1. Flash the FW A11
- BL + AP + CP + CSC ( clean data)
- put (TWRP + vbmeta_disabler)dot tar in USERDATA slot.
and click "Start"
NOTE.
• Default Odin Auto reboot to system.
• But Your device will reboot but it will not boot into system as "vbmeta signature" has changed.
2. When Auto Boot into TWRP mode from step 1. TAB screen may be black , you must activates it by press power then volumn.
Insert USB OTG attach mouse. wait for mouse detecting.
In your TWRP Recovery menu.
• Go to Advanced > Terminal, type: multidisabler. Click Enter.
• Go back to Main menu , Wipe > Format Data > type yes.
Option<<<Install the Magisk.apk with TWRP >>>
3. Boot---->System
Done
>>>>>>>>>>>>>>>>>>
From your Computer
1. INSTALL "Android Bootloader interface" Driver. (Download from First page OP)
Note: very important bootloader driver for used fastboot of the twrp.
Android Bootloader Interface Drivers are needed for your PC to identify the device connected in Fastboot Mode and hence execute the desired Fastboot Commands.
2. Copy & paste "Platform tools" to C:/ and copy &paste GSI.img into this folder. ( "vbmeta.img" IF NOT FOUNDED , PLEASE EXTRACTED FROM YOUR AP FILE)
3. Run Cmd or Open cmd.bat from inside folder platform tools ,
Code:
adb reboot fastbootfastboot devices
.>>>Output screen will show your tab S/n
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Code:
fastboot erase system
Code:
fastboot flash system yourGSI.img>>> divided PE system image file into parts suitable for write to dynamic tab
> system partition.
Code:
fastboot -w
Code:
fastboot reboot recoveryfrom TWRP menu
wipe --->format data --->yes
reboot System
Now meet PE.
Detail: download OP: !!! Want more detail , please download Ain1.jpg https://forum.xda-developers.com/attachments/ain1-jpg.5691897/
Update
Pixel Experience 12.1 v415.1 ( not boot on mediatek )
>>>>>>>Tools Resources.<<<<<
Download: (TWRP225 + vbmeta_disabler).tar https://mega.nz/file/QTIWmTJb#jIneu-vSC-tOSzN-mFhOurCtShGuZTkyoRrQ791R24s
PE+ PixelExperience_Plus_arm64-ab-vndklite-12.1-20220613-UNOFFICIAL.img.xz
PE PixelExperience_arm64-ab-vndklite-12.1-20220612-UNOFFICIAL.img.xz
Releases · ponces/treble_build_pe
Script and patches for building PHH-Treble Pixel Experience - ponces/treble_build_pe
github.com
A Magisk module to:- Hide tablet taskbar pill (Long press to hide, for Android 12.1+)
- Fix tablet taskbar height (for PixelExperience 12.1)
Releases · Coxxs/hide-tablet-taskbar
A Magisk module to hide tablet gesture bar and more [Android 12.1+] - Coxxs/hide-tablet-taskbar
github.com
SamsungAppsPatcher:
SamsungAppsPatcher - Adil Hanney
Samsung Apps Patcher for Samsung phones with custom ROMs.
adil.hanney.org
>>>>>>>>>>>>>>>>
Last edited:
Thx for your time and the reply.<<<< Note PE v.415 BUG NOT BOOT FROM MEDIATEK>>>>
Easy & Quick RESTORE FROM GSI BACK TO STOCK with TWRP
!!! If you are already on the A11.
!!! Bootloader unlocked.
!!! Download the actual FW A11 with Frija or samfirm or Bifrost, and extract
it and you will get 5 files (AP, BL, CP, CSC and HOME_CSC). All files are in tar format and can be opened by 7-Zip, WinRAR or other software.
1. Flash the FW A11
- BL + AP + CP + CSC ( clean data)
- put (TWRP + vbmeta_disabler)dot tar in USERDATA slot.
and click "Start"
NOTE.
• Default Auto reboot to system.
• Your device will reboot but it will not boot into system as "vbmeta signature" has changed.
2. When Auto Boot into TWRP mode from step 1. TAB screen may be black , you must activates it by press power then volumn.
Insert USB OTG attach mouse. wait for mouse detecting.
In your TWRP Recovery menu.
• Go to Advanced > Terminal, type: multidisabler. Click Enter.
• Go back to Main menu , Wipe > Format Data > type yes.
Option<<<Install the Magisk.apk with TWRP >>>
3. Boot---->System
Done
Download: (TWRP225 + vbmeta_disabler).tar https://mega.nz/file/QTIWmTJb#jIneu-vSC-tOSzN-mFhOurCtShGuZTkyoRrQ791R24s
PE+ PixelExperience_Plus_arm64-ab-vndklite-12.1-20220613-UNOFFICIAL.img.xz
PE PixelExperience_arm64-ab-vndklite-12.1-20220612-UNOFFICIAL.img.xz
Releases · ponces/treble_build_pe
Script and patches for building PHH-Treble Pixel Experience - ponces/treble_build_pe
A Magisk module to:
- Hide tablet taskbar pill (Long press to hide, for Android 12.1+)
- Fix tablet taskbar height (for PixelExperience 12.1)
Releases · Coxxs/hide-tablet-taskbar
A Magisk module to hide tablet gesture bar and more [Android 12.1+] - Coxxs/hide-tablet-taskbar
In your steps you describe the steps after installing the PE from before?
Or you describe how to install the PE?
Because I do not see any step to install the PE after installing the clean original ROM.
The - BL + AP + CP + CSC ( clean data) are frome the original Samsung Rom, yes?
So, if I install Samsung Rom how will it be back the PE?
I do not want to go back to stock ROM, I want to have the PE gsi, but after doing al the steps via fastboot mode and installing PE, it do not rebooting to the system, it stays and reboot all the time to TWRP.
Hope I am clear enough.
Thx again!
Last edited:
U installed v415 right? If yes, it bootloop to TWrP cause bug from mediatek .
Uses only v414
If v416 no bug you can update with no wipe data.
If I will install the 414, is there any other steps to take after doing everything with fastboot and booting into recovery? I am just rebooting to the system via TWRP?
If U recovery tab back state for install GSI with
Easy & Quick RESTORE FROM GSI BACK TO STOCK with TWRP
Now U ready to open Computer , connect it run "Set of Fastboot command for GSI" from inside platform_ tools folder.//updated your tutorial already please read again , if any Quations pm me.
Last edited:
First, Thx!!<<<< Note PE v.415 BUG NOT BOOT FROM MEDIATEK>>>>
Easy & Quick RESTORE FROM (Any GSI) BACK TO (STOCK with TWRP)
!!! If you are already on the A11.
!!! Bootloader unlocked.
!!! IF CAME FROM "SOFT BRICKED"
(Forced Restart to Download mode.)--from system failure
Press key combo ( Power + vol up + vol down ) until blank screen then release power button but still press and hold ( Vol up + Vol down ) + connect USB cable to Computer. ( Download mode)
0. Download the actual FW A11 with Frija or samfirm or Bifrost, and extract
it and you will get 5 files (AP, BL, CP, CSC and HOME_CSC). All files are in tar format and can be opened by 7-Zip, WinRAR or other software.
1. Flash the FW A11
- BL + AP + CP + CSC ( clean data)
- put (TWRP + vbmeta_disabler)dot tar in USERDATA slot.
and click "Start"
NOTE.
• Default Odin Auto reboot to system.
• But Your device will reboot but it will not boot into system as "vbmeta signature" has changed.
2. When Auto Boot into TWRP mode from step 1. TAB screen may be black , you must activates it by press power then volumn.
Insert USB OTG attach mouse. wait for mouse detecting.
In your TWRP Recovery menu.
• Go to Advanced > Terminal, type: multidisabler. Click Enter.
• Go back to Main menu , Wipe > Format Data > type yes.
Option<<<Install the Magisk.apk with TWRP >>>
3. Boot---->System
Done
>>>>>>>>>>>>>>>>>>
From your Computer
1. INSTALL "Android Bootloader interface" Driver. (Download from First page OP)
2. Copy & paste "Platform tools" to C:/ and copy &paste GSI.img into this folder.
3. Run Cmd or Open cmd.bat from inside folder platform tools ,
adb reboot fastboot
>>>tab will auto reboot to "TWRP fastoot mode" (ignored black screen)
fastboot devices
.>>>Output screen will show your tab S/n
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot erase system
fastboot flash system yourGSI.img
>>> ignored invalid spare 'system'...at header magic
>>> divided PE system image file into parts suitable for write to dynamic tab
> system partition.
fastboot -w
fastboot reboot recovery
>>>>>>Booting to TWRP
from TWRP menu
wipe --->format data --->yes
reboot System
Now meet PE.
View attachment 5692879
Detail: download OP: !!! Want more detail , please download Ain1.jpg https://forum.xda-developers.com/attachments/ain1-jpg.5691897/
>>>>>>>Tools Resources.<<<<<
Download: (TWRP225 + vbmeta_disabler).tar https://mega.nz/file/QTIWmTJb#jIneu-vSC-tOSzN-mFhOurCtShGuZTkyoRrQ791R24s
PE+ PixelExperience_Plus_arm64-ab-vndklite-12.1-20220613-UNOFFICIAL.img.xz
PE PixelExperience_arm64-ab-vndklite-12.1-20220612-UNOFFICIAL.img.xz
Releases · ponces/treble_build_pe
Script and patches for building PHH-Treble Pixel Experience - ponces/treble_build_pe
A Magisk module to:
- Hide tablet taskbar pill (Long press to hide, for Android 12.1+)
- Fix tablet taskbar height (for PixelExperience 12.1)
Releases · Coxxs/hide-tablet-taskbar
A Magisk module to hide tablet gesture bar and more [Android 12.1+] - Coxxs/hide-tablet-taskbar
SamsungAppsPatcher:
SamsungAppsPatcher - Adil Hanney
Samsung Apps Patcher for Samsung phones with custom ROMs.adil.hanney.org
>>>>>>>>>>>>>>>>
It works!!!!!!!!
I appreciate your time and answers.
But... my problem is that I want this device to function as a phone and not as a tablet, because in google assistant there are options that are working only with phones and not tablets.
Do you think I have a way to do it??
maybe another GSI ROM?
Is there a way to make the device think that it is a phone and not a tablet?
thx in advance.
Last edited:
Top Liked Posts
-
There are no posts matching your filters.
-
2Part 1:Step by Step: Create CustomAP framework file For GSI Flashing with Odin.by tom.android
Modified from @abg95a
Flash a GSI on the A7 Lite (without TWRP)
Update for add loop device in WSL2
( **will slow-down Win10 )
[ not recommend if you don't want to modified your system.img ]
>> Check WSL version.
Open CMD with Administrator
C:\Windows\System32>NAME STATE VERSIONCode:wsl --list --verbose
Ubuntu-20.04 Stopped 1
----> you are on wsl1
>>> Howto update it to WSL2 if you have installed Ubuntu ?
C:\Windows\System32>Code:wsl --set-version Ubuntu-20.04 2
Conversion in progress, this may take a few minutes...
For information on key differences with WSL 2 please visit https://aka.ms/wsl2
Conversion complete.
test after converted .
C:\Windows\System32>NAME STATE VERSIONCode:wsl --list --verbose
Ubuntu-20.04 Stopped 2
----> Now you are on wsl2
====End Update WSL1 with WSL2 ====
✓ LINUX Installation
Ubuntu Subsystem 20.04.5 LTS
OPEN microsoft store , Select Ubuntu version and click install.
After
Find Where to Stored installation Files.
here: (open windows show hidden file)
FOR WSL1
\Users\username\AppData\Local\Packages\CanonicalGroupLimited.Ubuntu20.04LTS_\LocalState
For WSL2 >>>you can access to home directory from windows (Windows 10 build 18342) like this :
\\wsl$
## make a shotcut to desktop (for easy copy and paste , sharing files between WIN and LINUX)
Resources: https://askubuntu.com/questions/759...t-directory-in-windows-subsystem-for-linux-an
====================================
New fresh install with WSL2 >
Ubuntu 20.04.5 LTS
>> How?
Before:
Check win10 with WSL1 or not
C:\Windows\System32>wsl --list --verbose
NAME STATE VERSION
Ubuntu-20.04 Stopped 1
----> you are on wsl1
Howto update to be "WSL2"
1.open windows10 update
setting--windows update---Advanced option = open receive update
After Download Update from Microsoft.
2. open windows system---command promp--Administrator mode
cmd> wsl --update
output
Checking for updates...
No updates are available.
Kernel version: 5.10.102.1 <----wsl2
3. RUN in CMD
Code:wsl --set-default-version 2
Then install Ubuntu.
Test: loop device.
Open Ubnutu terminal
Code:cd /devCode:ls -l | grep -v tty
(you will saw loop command.)[email protected]:~$ cd /dev
[email protected]:/dev$ ls -l | grep -v tty
total 0
crw-r--r-- 1 root root 10, 235 Oct 14 15:49 autofs
drwxr-xr-x 2 root root 40 Oct 14 15:49 block
drwxr-xr-x 2 root root 80 Oct 14 15:49 bsg
crw------- 1 root root 10, 234 Oct 14 15:49 btrfs-control
drwxr-xr-x 3 root root 60 Oct 14 15:49 bus
crw------- 1 root root 5, 1 Oct 14 15:49 console
crw------- 1 root root 10, 62 Oct 14 15:49 cpu_dma_latency
crw------- 1 root root 10, 203 Oct 14 15:49 cuse
lrwxrwxrwx 1 root root 13 Oct 14 15:49 fd -> /proc/self/fd
crw-rw-rw- 1 root root 1, 7 Oct 14 15:49 full
crw-rw-rw- 1 root root 10, 229 Oct 14 15:49 fuse
crw-r--r-- 1 root root 1, 11 Oct 14 15:49 kmsg
crw------- 1 root root 10, 237 Oct 14 15:49 loop-control
brw------- 1 root root 7, 0 Oct 14 15:49 loop0
brw------- 1 root root 7, 1 Oct 14 15:49 loop1
brw------- 1 root root 7, 2 Oct 14 15:49 loop2
brw------- 1 root root 7, 3 Oct 14 15:49 loop3
brw------- 1 root root 7, 4 Oct 14 15:49 loop4
brw------- 1 root root 7, 5 Oct 14 15:49 loop5
brw------- 1 root root 7, 6 Oct 14 15:49 loop6
brw------- 1 root root 7, 7 Oct 14 15:49 loop7
drwxr-xr-x 2 root root 60 Oct 14 15:49 mapper
crw------- 1 root root 1, 1 Oct 14 15:49 mem
drwxr-xr-x 2 root root 60 Oct 14 15:49 net
crw-rw-rw- 1 root root 1, 3 Oct 14 15:49 null
crw------- 1 root root 10, 144 Oct 14 15:49 nvram
crw------- 1 root root 108, 0 Oct 14 15:49 ppp
crw-rw-rw- 1 root root 5, 2 Oct 14 16:56 ptmx
drwxr-xr-x 2 root root 0 Oct 14 15:49 pts
brw------- 1 root root 1, 0 Oct 14 15:49 ram0
brw------- 1 root root 1, 1 Oct 14 15:49 ram1
brw------- 1 root root 1, 10 Oct 14 15:49 ram10
brw------- 1 root root 1, 11 Oct 14 15:49 ram11
brw------- 1 root root 1, 12 Oct 14 15:49 ram12
brw------- 1 root root 1, 13 Oct 14 15:49 ram13
brw------- 1 root root 1, 14 Oct 14 15:49 ram14
brw------- 1 root root 1, 15 Oct 14 15:49 ram15
brw------- 1 root root 1, 2 Oct 14 15:49 ram2
brw------- 1 root root 1, 3 Oct 14 15:49 ram3
brw------- 1 root root 1, 4 Oct 14 15:49 ram4
brw------- 1 root root 1, 5 Oct 14 15:49 ram5
brw------- 1 root root 1, 6 Oct 14 15:49 ram6
brw------- 1 root root 1, 7 Oct 14 15:49 ram7
brw------- 1 root root 1, 8 Oct 14 15:49 ram8
brw------- 1 root root 1, 9 Oct 14 15:49 ram9
crw-rw-rw- 1 root root 1, 8 Oct 14 15:49 random
crw------- 1 root root 251, 0 Oct 14 15:49 rtc0
brw------- 1 root root 8, 0 Oct 14 15:49 sda
brw------- 1 root root 8, 16 Oct 14 15:49 sdb
crw------- 1 root root 21, 0 Oct 14 15:49 sg0
crw------- 1 root root 21, 1 Oct 14 15:49 sg1
lrwxrwxrwx 1 root root 8 Oct 14 15:49 shm -> /run/shm
lrwxrwxrwx 1 root root 15 Oct 14 15:49 stderr -> /proc/self/fd/2
lrwxrwxrwx 1 root root 15 Oct 14 15:49 stdin -> /proc/self/fd/0
lrwxrwxrwx 1 root root 15 Oct 14 15:49 stdout -> /proc/self/fd/1
crw-rw-rw- 1 root root 1, 9 Oct 14 15:49 urandom
crw------- 1 root root 7, 0 Oct 14 15:49 vcs
crw------- 1 root root 7, 1 Oct 14 15:49 vcs1
crw------- 1 root root 7, 128 Oct 14 15:49 vcsa
crw------- 1 root root 7, 129 Oct 14 15:49 vcsa1
crw------- 1 root root 7, 64 Oct 14 15:49 vcsu
crw------- 1 root root 7, 65 Oct 14 15:49 vcsu1
drwxr-xr-x 2 root root 60 Oct 14 15:49 vfio
crw------- 1 root root 10, 238 Oct 14 15:49 vhost-net
crw------- 1 root root 10, 63 Oct 14 15:49 vsock
crw-rw-rw- 1 root root 1, 5 Oct 14 15:49 zero
[email protected]:/dev$
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
GET START>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>✓ Get " super.img" from inside Stock AP File
by Extract (super.img.lz4) file by Windows or Linux.
For Windows
Download lz4 for win and extract into C:\AnyName
from https://github.com/lz4/lz4/releases
1) extract "super.img.lz4" from Stock AP Firmware file with 7zip, into lz4 folder.<AnyName>
2) go into folder lz4_win64_v1_9_4 and run CMD
Code:lz4 -d super.img.lz4 super.img
copy output " super.img" to uses with Ubuntu at /home/username/
>>>>>>>>>>>>≥>>>>>>>>>>>>>>>>>>>>>>
For Linux:
✓ launch Ubuntu terminal( console) from Start menu
2.1) Option We can uses LZ4 from linux, process same as (Step 1-2 for wins)
Ubuntu
you can install LZ4 from Ubuntu Console with
Code:sudo apt update sudo apt-get -y install lz4 or sudo apt install liblz4-tool
note
lz4 [option] input output
lz4 -d (d= decompress)
lz4 -dc ( c=concatenate )
2.2) Option Extract "super.img.lz4" from Stock AP framework file.
and paste it to /home/username/
2.3)
Code:sudo lz4 -d super.img.lz4 super.img
2.4)COMPARE with using "lz4" between Ubuntu and Windows
CONCLUSION of Beginning step.
WE CAN GETS " SUPER.IMG" FROM TWO WAYS , WINDOWS OR LINUX.
( windows from step 1-2 ) or. ( Linux from step 2.1 -2.3)
***We will use 'super.img' to begin our modification.✓ unpacking super.img
3.) Turn sparse format To RAW
Ubuntu
**First of all the super.img file might be in sparse format so we need to make it raw image. By Using "SIMG2IMG"
Code:sudo apt-get update sudo apt-get install simg2img
I'm
ok
Code:sudo apt-get install img2simg
After install execute this command.
Code:sudo simg2img super.img super.raw
✓Extract subpartition out from "SUPER.RAW"
4) Tool for extract partition. ( very important tool for show "group schema" which used to specific parameter option for lpmake.)
4.1) Download imjtool
http://newandroidbook.com/tools/imjtool.tgz
or download from attach file belows this tutorial (imjtool.zip)
4.2) extract "imjtool" from archive imjtool.tgz to /home/username/
*note for short i renamed it to 'imjtool'
4.3) then give it permission with command
Code:chmod +x imjtool
5) Extract sub partition within our "SUPER.RAW"
By execute this command
Code:./imjtool super.raw extract
It will extract sub-partitions (4 img files ) in the folder "/home/user/extracted"
- system.img
- vendor.img
- product.img
- odm.img
✓ Modify Stock "system.img" by Changes with GSI-"system.img"
6) Choose your favorite GSI. ( Recommend PHH Treble- GSI )
Download from :-
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
6.1) Extract Downloaded archive & Replace "system.img" with your GSI img
(rename it to system.img over-written the old file.)
6.2 )
Move all img files (6.1)
from /home/username/extracted folder into /home/username/
7.) Get each partitions file size.
we can do it by:
Code:stat -c '%n %s' IMG_FILE.img
:- do it for all partitions files.
7.1Exam output---system.img 308 951 4496Code:stat -c '%n %s' system.img
7.2Exam ouputt----vendor.img 718 503 936Code:stat -c '%n %s' vendor.img
7.3Exam output----product.img 118 811 8528Code:stat -c '%n %s' product.img
7.4Exam output----odm.img 434 9952Code:stat -c '%n %s' odm.img
7.5 ***size of the "original super.raw"
Exam output----super.raw 609 432 3712Code:stat -c '%n %s' super.raw
✓ Repacked modified sub-partition back
8) Repacked new super.img.
8.1 fill in "img partition size" formular (parameter) to your prepared command below
explanation:
explanation:
Prepared command "LPMAKE" parameter
sudo ./otatools/bin/lpmake --metadata-size 65536 \
--super-name super \
--metadata-slots 2 \
--device super:ORIGINAL_SUPER_IMG_SIZE \
--group main:SUM_OF_ALL_PARTITIONS_SIZES \
--partition odm:readonly:ODM_PARTITION_SIZE:main \
--image odm=./odm.img \
--partition product:readonly
RODUCT_PARTITION_SIZE:main \
--image product=./product.img \
--partition system:readonly:SYSTEM_PARTITION_SIZE:main \
--image system=./system.img \
--partition vendor:readonly:VENDOR_PARTITION_SIZE:main \
--image vendor=./vendor.img \
--sparse \
--output ./super_new.img
Note:
Replace
ORIGINAL_SUPER_IMG_SIZE,
SUM_OF_ALL_PARTITIONS_SIZES
ODM_PARTITION_SIZE,
PRODUCT_PARTITION_SIZE,
SYSTEM_PARTITION_SIZE,
VENDOR_PARTITION_SIZE
with the values you obtained in step 7.
====================
8.2
Download & extract : OTATOOLS to /home/username/
here:**We only want to use "lpmake" from its.Google Drive - Virus scan warning
drive.google.com
*** If you have a problem when used command " sudo ./otatools/bin/lpmake --metadata-size 65536 \ bra bra bra
Error message: Command not found.
Do this...
orCode:chmod +x otatools/bin/lpmake
Code:chmod -R +x otatools
> exit terminal and Login Back again
8.3) execute prepared formular (8.1) with this command
Note: Numeric are my Example only.
1. Fix partition size ( odm + product + vendor )
434 9952 + 118 811 8528 + 718 503 936 = 1,910,972,416 + (new system.img )= Sum of all 4 partition.
2. Fix All partition ( super.raw) = 609 432 3712
***DO NOT COPY!!***
explanation:
Code:sudo ./otatools/bin/lpmake --metadata-size 65536 \ --super-name super \ --metadata-slots 2 \ --device super:6094323712 \ --group main:5000486912\ --partition odm:readonly:4349952:main \ --image odm=./odm.img \ --partition product:readonly:1188118528:main \ --image product=./product.img \ --partition system:readonly:3864137728:main \ --image system=./system.img \ --partition vendor:readonly:718503936:main \ --image vendor=./vendor.img \ --sparse \ --output ./super_new.img
OUTPUT SHOW:-
lpmake I 09-11 03:32:54 36 36 builder.cpp:1012] [liblp]Partition odm will resize from 0 bytes to 4349952 bytes
lpmake I 09-11 03:32:54 36 36 builder.cpp:1012] [liblp]Partition product will resize from 0 bytes to 1188118528 bytes
lpmake I 09-11 03:32:54 36 36 builder.cpp:1012] [liblp]Partition system will resize from 0 bytes to 3864137728 bytes
lpmake I 09-11 03:32:54 36 36 builder.cpp:1012] [liblp]Partition vendor will resize from 0 bytes to 718503936 bytes
Invalid sparse file format at header magic
Invalid sparse file format at header magic
Invalid sparse file format at header magic
Invalid sparse file format at header magic
**lpmake expand partition success. Resize from 0 bytes to 9999999 bytes
**ignored Invalid sparse file format at header magic
✓Compress repacked modified new super.img
9) Compress the repacked super_new.img
Code:lz4 -B6 --content-size super_new.img super_new.img.lz4
10). Compress the clean vmbeta.img
Download Clean vbmeta.img from Google
https://dl.google.com/developers/android/qt/images/gsi/vbmeta.img
Code:lz4 -B6 --content-size vbmeta.img vbmeta.img.lz4
Win10
(From Attachment download.)
11). Down& Extract "tar-md5-script-tool.zip" to C;\
11.1 extract all *.img.lz4 files (from AP Stock) to. C:/ tar-md5-script-tool folder
12) Replace
super.img.lz4 and
vbmeta.img.lz4
|
in tar-md5-script-tool dir
|
with your repacked and compressed
super_new.img.lz4 (rename it to super.img.lz4)--->output from step 9
and the clean compressed
vbmeta.img.lz4. ------> output from step 10
13) Run Win Batch File For Packing Custom AP file (tar.md5) for Odin
Run batch.bat in tar-md5-script-tool folder
[You will find the " AP_TAR_MD5_CUSTOM_FILE_ODIN.tar.md5"
in the temp-folder subdir]
***Don't Rename
14) Final Flashing with ODin
...14.1) Device must installed Stock Firmware. (No root)
* No bad critical conditions happened when you are on STOCK ROM.
... 14.2) OEM Unlock [Developer options] must gray out but
. enable on position.
... 14.3) KG State Must be "Checking state" status.
( if kg state = Broken ) = you must have goto flash Pure stock firmware
again and this time uses ONLY "CSC" factory reset
. *NO used Home_CSC
After finished odin fashing must connected internet, check "kg status"
again )
...14.4) Flashing all files at once, don't ignored any slot.( AP+BL+CP+CSC)
except USERDATA
(Odin will shrink non-slot data size automatically)
...14.5) After Device reboot
(1st) show android robot - remove old system
(2nd) Due to new vbmeta.img has changed from stock , tab will reboot to
Recovery menu , you must select its factory reset menu manually.
...14.6) Click Magisk icon app to update
" Upgrade to full Magisk to finish the setup. Download and install"OK
- Magisk app will not reboot but update itself. But if you open app
again it will asked to reboot for addition upgrade.
>AP SLOT : AP_TAR_MD5_CUSTOM_FILE_ODIN.tar.md5
>BL Slot : BL Stock.md5
>CP SLOT: CP Stock.md5
>CSC Slot: CSC Stock.md5 ------> (Don't uses HOME_CSC)
>USERDATA Slot: magisk_boot_vbmeta_patch.tar
✓ How to create Magisk patch for boot.img + vbmeta.img
- extract (vbmeta.img.lz4 + boot.img.lz4) from your AP Stock
- create compress one file xxx .tar with 7zip
- move (vbmeta.img.lz4 + boot.img.lz4).tar (xxx.tar) to tab a7 lite
- install magisk.apk on you tab a7 lite
- patch the tar file. (with magisk manager)
- result magisk-patch file at Tab a7 :-Download folder.
Recommend: Default R/W GSI " by Nazim"
My Examples
https://forum.xda-developers.com/t/...-lite-gsi-installation.4503647/#post-87550627
If you can't booted "VNDK Lite" variant but want to uses mount Read/Write .
Part3 -Create CustomAP Tutorial.
2
1. Root ( by patch boot.img with magisk ) is not depended on TWRP.
2. We can uses Fastboot of TWRP for flashing GSI (system) because Sam devices have not using Fastboot mode.
3. if you don't uses fastboot or twrp for flashing tools , the only thing left is odin.
Go to customize your sam device with odin if you want.1
I never used Bluetooth with Sony. Used only wired.
Try to setup GSI here
-Samsung features
Enable stereo audio mode
Enable extra sensors
-Misc features
Use alternate way to detect headsets
Disable audio effects
and reboot1
Try it ..will work . I only uses Bluetooth with Samsung buds 2 only. Sony with wired.1<<<< Note PE v.415 BUG NOT BOOT FROM MEDIATEK>>>>
Easy & Quick RESTORE FROM (Any GSI) BACK TO (STOCK with TWRP)
!!! If you are already on the A11 (Pure Stock)
!!! Bootloader unlocked.
!!! IF CAME FROM "SOFT BRICKED"
(Forced Restart to Download mode.)--from system failure
Press key combo ( Power + vol up + vol down ) until blank screen then release power button but still press and hold ( Vol up + Vol down ) + connect USB cable to Computer. ( Download mode)
0. Download the actual FW A11 with Frija or samfirm or Bifrost, and extract
it and you will get 5 files (AP, BL, CP, CSC and HOME_CSC). All files are in tar format and can be opened by 7-Zip, WinRAR or other software.
1. Flash the FW A11
- BL + AP + CP + CSC ( clean data)
- put (TWRP + vbmeta_disabler)dot tar in USERDATA slot.
and click "Start"
NOTE.
• Default Odin Auto reboot to system.
• But Your device will reboot but it will not boot into system as "vbmeta signature" has changed.
2. When Auto Boot into TWRP mode from step 1. TAB screen may be black , you must activates it by press power then volumn.
Insert USB OTG attach mouse. wait for mouse detecting.
In your TWRP Recovery menu.
• Go to Advanced > Terminal, type: multidisabler. Click Enter.
• Go back to Main menu , Wipe > Format Data > type yes.
Option<<<Install the Magisk.apk with TWRP >>>
3. Boot---->System
Done
>>>>>>>>>>>>>>>>>>
From your Computer
1. INSTALL "Android Bootloader interface" Driver. (Download from First page OP)
Note: very important bootloader driver for used fastboot of the twrp.
Android Bootloader Interface Drivers are needed for your PC to identify the device connected in Fastboot Mode and hence execute the desired Fastboot Commands.
2. Copy & paste "Platform tools" to C:/ and copy &paste GSI.img into this folder. ( "vbmeta.img" IF NOT FOUNDED , PLEASE EXTRACTED FROM YOUR AP FILE)
3. Run Cmd or Open cmd.bat from inside folder platform tools ,
>>>tab will auto reboot to "TWRP fastoot mode" (ignored black screen)Code:adb reboot fastboot
fastboot devices
.>>>Output screen will show your tab S/n
Code:fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Code:fastboot erase system
>>> ignored invalid spare 'system'...at header magicCode:fastboot flash system yourGSI.img
>>> divided PE system image file into parts suitable for write to dynamic tab
> system partition.
>>>This will also erase your internal storage.Code:fastboot -w
>>>>>>Booting to TWRPCode:fastboot reboot recovery
from TWRP menu
wipe --->format data --->yes
reboot System
Now meet PE.
Detail: download OP: !!! Want more detail , please download Ain1.jpg https://forum.xda-developers.com/attachments/ain1-jpg.5691897/
Update
Pixel Experience 12.1 v415.1 ( not boot on mediatek )
>>>>>>>Tools Resources.<<<<<
Download: (TWRP225 + vbmeta_disabler).tar https://mega.nz/file/QTIWmTJb#jIneu-vSC-tOSzN-mFhOurCtShGuZTkyoRrQ791R24s
PE+ PixelExperience_Plus_arm64-ab-vndklite-12.1-20220613-UNOFFICIAL.img.xz
PE PixelExperience_arm64-ab-vndklite-12.1-20220612-UNOFFICIAL.img.xz
A Magisk module to:
- Hide tablet taskbar pill (Long press to hide, for Android 12.1+)
- Fix tablet taskbar height (for PixelExperience 12.1)
SamsungAppsPatcher:
>>>>>>>>>>>>>>>>
