Dasaita - Latest MCU and Updates for Dasita PX6 1280x720 MAX10

[saady002000]

Now you can reset factory setting from factory reset button.
Press for 3 to 7 seconds till lights blink.
And wait till it complete reset action.
Or u can connect USB includes ( update zip file, DMCU.img file, and DMCU.ext file)
It will boot and can update.
Good luck

 

[rudyboler]

Well gentlemen, this is going little by little, I have almost the screen, but it is not all right, then when I hit the touch if I move to the right goes to the left, I mean the other way around, and so on, I imagine that I will return little by little, I have gotten into car settings, but It does not allow me to put the touch that appears on the screen to calibrate it +1 and then +2, the color looks very bad on the screen, and on the monitor when I touch something it stays like when you are going to send a marked file (I leave you the photo of the monitor) I do not know what it will be, to see if it returns little by little to your site.

 

[saady002000]

Did you added dmcu.ext file??
Or not updated yet??

 

[rudyboler]

If I did, I put the MTCE_HA3.78_1,
But look at the screen, in the end I'm going to have to put it back in again or what do I do?


I was wrong and I put it back, forgive me.

 

[rudyboler]

If I did, I put the MTCE_HA3.78_1,
But look at the screen, in the end I'm going to have to put it back in again or what do I do?

 

[saady002000]

Format your USB first.
And copy following three files to it:-
1-Update.zip
2-Dmcu.img
3-Dmcu.ext

Then connect and update.
It sha work and colors will take little time to come back to original.

 

[rudyboler]

Okay, you can give me the link of the files that I don't even know where I have them, thanks.


And what do I update the MCU or how do I do it, if you can tell me? I never miss the three files

 

[saady002000]

Android 10 Update MAX10 Version：HA3_rk3399_10.0_ota(20210722) https://www.dropbox.com/s/kaazivfzcef9wb6/HA3_rk3399_10.0_ota(20210722)升级包.zip?dl=0 MCU : 3.78 https://www.dropbox.com/s/3hd3ci3rp07ddnt/dmcu.img?dl=0

Well my friend try this two links for update.zip file and dmcu.img

This two links are original and i got from dasaita official store. try only this two files first and let us see.
After finish wait and we ll see.


If it did not work you can go to qoute No.#281 by Mr. Orik13. Here is copy of it.

For Dasaita PX6

Updates on Dasaita website: https://www.dasaita.com/blogs/news/update-firmware

-----
Older versions:

Android 10:
HA3_rk3399_10.0_ota(20200915)升级包 : https://yadi.sk/d/ylg0cKBTQo4P1Q
HA3_rk3399_10.0_ota(20200724)升级包 : https://yadi.sk/d/AWDSmBsznvL3gQ

MCU images - unzip and copy "img" file to flash (sd/usb):
v3.57: View attachment 5111231
v3.60: View attachment 5111233
v3.62: View attachment 5111235

DMCU - unzip and copy to flash (sd/usb) together with MCU image:
for 1280x720 units: View attachment 5111237 - use it if you got a wrong resolution after flashing MCU image and you need to restore your unit to 1280x720 resolution

All works for me on Dasaita PX6 MAX10 (the unit came with Android 10 from the factory

 

[rudyboler]

Ok, I have the last dasaita I imagine it will be to install it again by usb, and the dmcu.img but there are two files, before you disjisted three, the dmcu.ext is missing, which I imagine is mine 1280x720, then I put the three files in a usb or I go one by one.

 

[saady002000]

Put the three of them together same time.
Unite will read it all

 

[rudyboler]

Ok thank you, I look at it and tell you something, thank you.

 

[suchar20]

Format your USB first.
And copy following three files to it:-
1-Update.zip
2-Dmcu.img
3-Dmcu.ext

Then connect and update.
It sha work and colors will take little time to come back to original.

So you don't update the software as you write. Correctly, you need to format the pendriv and upload only the system software to it, only the update.zip file. Then connect the flash drive to the USB of the radio and perform the system update. After updating the pendriv, reformat and upload the dmcu.img and dmcu.ext files to it. Reconnect pendrive to USB and perform MCU update. By updating this, we avoid potential errors.

 

[rudyboler]

Ok according to the compi suchar20 says to update the image first in usb formatted to FAT32, and then when it is finished reformat the USB and copy the two files .img and .ext
and update the MCU, I think I got it, thanks
So I will and I tell you

 

[rudyboler]

Good gentlemen, thank you all for helping me, I will explain to you it already works, I will leave you some pictures, the Chinese (Seller) sent me two files dmcu.ext (screen: 13) and hct.aut (empty), format the SD card to FAT32 and I put them in, I put it in the SD slot of the device and when I started it I caught it alone, without touching anything, the screen put screen: 13, until it was installed and it was fine, thank you very much everyone, greetings.

 

[saady002000]

Congrates dear enjoy.

Share files which you got from the seller.
So we can use later on if we faced this problem again.

 

[rudyboler]

Ok, mate, there are the files, a small manual is in Chinese, but more or less it
is understood, there I leave it, sldsssss ..

 

[Uthopia]

Hello i have the same problem. I try to update my headunit and when restart i have a white screen and now its a blank screen. I dont have any HDMI out, i can not use the headunit with another screen....
How resolve that? (If some french guys are in the place will be cool my english is so bad.....)
Thx

 

[Pavel-71]

Hello i have the same problem. I try to update my headunit and when restart i have a white screen and now its a blank screen. I dont have any HDMI out, i can not use the headunit with another screen....
How resolve that? (If some french guys are in the place will be cool my english is so bad.....)
Thx

Some processor boards have MINI-HDMI on them.

 

[Uthopia]

Some processor boards have MINI-HDMI on them.

View attachment 5442851View attachment 5442849

So i need open the headunit? no risque with the warranty?

 

[Uthopia]

Well it's always better but not yet, I have an image but double and low definition. At least I can interact with the device but I really feel like the stuff is messing around.
Impossible to find a reliable site for updating my dasaita ....