DDLF2 Full (PIT,BOOTLOADER,PDA,PHONE,CSC) Orignal Firmware

[shaktishekhar]

DDLF2 Full (PIT,BOOTLOADER,PDA,PHONE,CSC) Orignal Firmware.
Imported From Samsung Service Center Directly, Ultra Compressed 200 MB Only Uploaded By Me "Sgatechwork". :good: :laugh: :victory: Enjoy ... Don't forget PRESS "THANKS BUTTON" :good: :good:

You Can Directly Flash This On your i9003 no need to flash any thing before this. Because its a full pack firmware.
For cm 10 10.1 or any other based on these if you are from india or if you want your baseband Version to I9003DDLE1 Than just download modem.zip (ultra Compressed) from attachment Extract zip take modem.bin and push it in /radio 0664 which is rw-rw-r--
Like this
Download Only Modem.bin View attachment modem.zip

Resumable Links

Download Now

Mirror

Mirror Download


Edit:
Confirmation

Installation instructions:

1:Turn Off Your Phone
2ress Vol Down+Home + Power Until Downloading Screen Comes...
3:Than Start Loading Files in

PIT =latona_20110114.pit 
Bootloader =APBOOT_I9003DDLF2_CL1153545_REV08_user_low_ship.tar.md5 
PDA=CODE_I9003DDLF2_CL1153545_REV08_user_low_ship.tar.md5 
Phone=MODEM_I9003DDLE1_REV_00_CL1149304.tar.md5 
CSC=GT-I9003-MULTI-CSC-ODDLF2_RST.tar.md5
For CF Root Open Odin 1.85 Load Only PDA=DDLF2-CFROOT-30-06-2012.tar

For Root And ClockWorkMode Recovery
CF Root LF2 (PDA only with Odin) Download Download CF Root Link
Download Odin 1.85 Download Now

Than Check Box Re-Partition Auto Reboot F.Reset Time Phone Bootloader Update Than Press Start When it says PASS In a green Box wait Till reboot is done than remove the cable enjoy...

 

[vishal24387]

Does this mean that we can flash DDLF2 directly instead of starting from xxkpe as this new uploaded firmware contain all necessary files??

 

[xenyaliosx]

probably. but still a confirmation would be great.

Sent from my GT-I9003 using xda app-developers app

 

[hider7]

Yeeh does that mean full clean begin from it .. We need confirm about these thing ..

Thanks very much ..

Sent from my GT-I9003 using xda premium

 

[varunthapliyal999]

Tested.Works like a charm.And yes it makes a full wipe.

 

[marshygeek]

I suggest you add a guide on how to flash this if its proven that this does not need xxkpe to start with. This is really great. Flashaholic members will no longer have a hard time doing a clean flash.

---------- Post added at 07:47 AM ---------- Previous post was at 07:46 AM ----------

Tested.Works like a charm.And yes it makes a full wipe.

You flashed directly? Wow. Have you included the bootloader? your from what base rom?

 

[varunthapliyal999]

I suggest you add a guide on how to flash this if its proven that this does not need xxkpe to start with. This is really great. Flashaholic members will no longer have a hard time doing a clean flash.

---------- Post added at 07:47 AM ---------- Previous post was at 07:46 AM ----------



You flashed directly? Wow. Have you included the bootloader? your from what base rom?

Yeah I flashed it directly.I did not include the bootloader.Iwas on CM 10.1 Alpha 4.Just wanted to make a clean install so tested it.

 

[Siddhant Shankpal]

Yeah I flashed it directly.I did not include the bootloader.Iwas on CM 10.1 Alpha 4.Just wanted to make a clean install so tested it.

Great news! :thumbup:
Thanks a lot for the confirmation!

Sent from my GT-I9003.

 

[LoLaTiOn]

Good news bro
easy clean now !!!

Tested just now I will review all the installation instructions thank you for this easy clean

With Odin 1.85
- Full LF2 reset odin then remove cable and battery after bootanimation

PIT =latona_20110114.pit
Bootloader =APBOOT_I9003DDLF2_CL1153545_REV08_user_low_ship.tar.md5
PDA=CODE_I9003DDLF2_CL1153545_REV08_user_low_ship.tar.md5
Phone=MODEM_I9003DDLE1_REV_00_CL1149304.tar.md5
CSC=GT-I9003-MULTI-CSC-ODDLF2_RST.tar.md5

- CF LF2 (PDA only with Odin) reset odin then remove cable and battery after bootanimation
- jellymystery A4 reboot automatic recovery works fine now !!!
- jellymystery A4 again with new recovery
- Wip cache and dalvik cache

time of need to put this topic in post-it

can you add link CFroot LF2 also
- CF Root LF2 (PDA only with Odin)

enjoy...

 

[karlcaks]

thanks bro :good:

 

[cukierkas]

thanks.
using xwlf2 as a base (eastern europe), but I guess that will do

 

[SikanderKeynes]

I never checked "Phone Bootloader Update" in Odin. Is it necessary for this full DDLF2 ?
Currently I'm using same old DDLF2 over XXKPE method without using "Phone Bootloader Update" option
Please confirm.

 

[LoLaTiOn]

yes bootloader no need after froyo

just for froyo upgrade (to GB HONEY ISC JB uses the same bootloader) no need updating this !!!

it is even not recommended to put bootloader because it is often responsible for Brick
Bootloader is the first step in flash, if you have a conflict on your computer
avoid process, samsung kies, adb, antivirus internet security software and others scan stuff before flash !!!

 

[SikanderKeynes]

@LoLaTiOn!
That what i thought so and read everywhere but was bit confused about checking that option. Thanks! for confirming

 

[felaipes]

I would like to go back to GB from Jb only because of the battery.
Im currently in Qwerty

can someone post every single step in a noob (me) friendly way,please?

From what i've read:

1) you need odin 1.85 installed on your pc
2)Start the phone while pressing Vol down+home+power to start in download mode (these has to be with the phone connected to the pc via usb cable or you can plug it in later?)
3)Fill every file category with the corresponding file in odin.
4)Check Box Re-Partition Auto Reboot F.Reset Time Phone Bootloader Update
5)Press Start
7)When it says PASS In a green Box wait Till reboot is done ....
8)thee remove usb cable from phone

Am i missing something? devilhell007 says that you dont need the bootloader file? Is this file necessary only with certains roms? which roms would that be?
and finally, i've read that some roms, change the file system of the phone, and returning to stock bricks it, does this method prevents and reverts that?

sorry for the noobish questions, big thanks in advance!

 

[shaktishekhar]

Load all the files as i mentioned... and flash it... than after paas ur done...

Sent from my GT-I9003 using xda premium

 

[varunthapliyal999]

I would like to go back to GB from Jb only because of the battery.
Im currently in Qwerty

can someone post every single step in a noob (me) friendly way,please?

From what i've read:

1) you need odin 1.85 installed on your pc
2)Start the phone while pressing Vol down+home+power to start in download mode (these has to be with the phone connected to the pc via usb cable or you can plug it in later?)
3)Fill every file category with the corresponding file in odin.
4)Check Box Re-Partition Auto Reboot F.Reset Time Phone Bootloader Update
5)Press Start
7)When it says PASS In a green Box wait Till reboot is done ....
8)thee remove usb cable from phone

Am i missing something? devilhell007 says that you dont need the bootloader file? Is this file necessary only with certains roms? which roms would that be?
and finally, i've read that some roms, change the file system of the phone, and returning to stock bricks it, does this method prevents and reverts that?

sorry for the noobish questions, big thanks in advance!

yes bootloader no need after froyo

just for froyo upgrade (to GB HONEY ISC JB uses the same bootloader) no need updating this !!!

it is even not recommended to put bootloader because it is often responsible for Brick
Bootloader is the first step in flash, if you have a conflict on your computer
avoid process, samsung kies, adb, antivirus internet security software and others scan stuff before flash !!!

As you can see LoLaTiOn said the same thing.
And bootloader might even brick your phone.So please refrain from doing so.

 

[shaktishekhar]

I hav no idea about it in samsung service center offically.. they use all the files to flash including bootloader even me my self always flashed my phone with all files never bricked... infact with my previous phone i always used bootloader and all files... els u c

Sent from my GT-I9003 using xda premium

 

[LoLaTiOn]

the first galaxysl and comes with froyo
That is why we must put the bootloader for an upgrade to gingerbread

after the upgrading not a time of need for clean

understand all ?

if a person is on froyo and does not put the bootloader it will encounter a bootloop only ^^

 

[shaktishekhar]

i totally understand and agreed with you

the first galaxysl and comes with froyo
That is why we must put the bootloader for an upgrade to gingerbread

after the upgrading not a time of need for clean

understand all ?

if a person is on froyo and does not put the bootloader it will encounter a bootloop only ^^

i totally understand and agreed with you but i am just saying what Samsung engineers thought to there service center technicians and instructed to do as per proper procedure, load all the files and flash it they do this for all the device any Samsung phone down grade up grade or same reflash they do the same sorry if am wrong but am just saying in the official way rest all on us...