Dead boot corrupt eMMC recover project

[Manish54]

So my Moto Z died again, and this time the PC wont even detect the phone as QUSB_BULK device so i cannot even run the blankflash file. And i know there are lot of people who are facing the same problem.
So the last time my PC detected the device and i ran the blnkflash file, it gave me the following error, which makes it clear that the eMMC is unreachable.

Motorola qboot utility version 3.37
[ 0.000] Opening device: \\.\COM6
[ 0.003] Detecting device
[ 0.007] ...cpu.id = 2375 (0x947)
[ 0.007] ...cpu.sn = 1125564604 (0x4316c0bc)
[ 0.007] Opening singleimage
[ 0.035] Loading package
[ 0.037] ...filename = singleimage.pkg.xml
[ 0.039] Loading programmer
[ 0.041] ...filename = programmer.elf
[ 0.041] Sending programmer
[ 0.117] Handling things over to programmer
[ 0.118] Identifying storage type
[ 0.119] Waiting for firehose to get ready
[ 60.122] Could not determine storage type. Assuming eMMC...
[ 60.122] Identifying CPU version
[ 60.122] Waiting for firehose to get ready
[ 63.136] WriteFile() failed, GetLastError()=0
[120.126] Waiting for firehose to get ready
[123.141] WriteFile() failed, GetLastError()=0

So i tried looking on the internet, and the closes thing that i found were 2 option:
1 - You replace your eMMC (Which is not an easy job)
2 - YOU CAN BOOT YOUR DEVICE WITH A MICRO SD CARD
But i dont have an SD Card so i have ordered it from Amazon and it'll arrive in few days. By that time, if anyone contribute anything or has a micro SD Card then they can try flashing their firmware on it and give a feedback then it'll be really appreciated.

 

[snowflacke86]

Try whit the last blankflash

https://forum.xda-developers.com/attachment.php?attachmentid=4378225&d=1514981126

 

[lucianocfernandes]

So my Moto Z died again, and this time the PC wont even detect the phone as QUSB_BULK device so i cannot even run the blankflash file. And i know there are lot of people who are facing the same problem.
So the last time my PC detected the device and i ran the blnkflash file, it gave me the following error, which makes it clear that the eMMC is unreachable.


So i tried looking on the internet, and the closes thing that i found were 2 option:
1 - You replace your eMMC (Which is not an easy job)
2 - YOU CAN BOOT YOUR DEVICE WITH A MICRO SD CARD
But i dont have an SD Card so i have ordered it from Amazon and it'll arrive in few days. By that time, if anyone contribute anything or has a micro SD Card then they can try flashing their firmware on it and give a feedback then it'll be really appreciated.

I was stuck in the same, but a couple of days ago I found blankflash version commented above and I managed to back my device back.

there is one thing that I dont know if relevant, but I couldnt recovery using my notebook and desktop PCs on windows 10. Only in another machine with Windows 8 I got it.

 

[makefriends85]

Any luck with SD CArd

Any luck with memory card?? My phone is in 9008 mode, but doesn't show up in disk drives. @Manish54

 

[Manish54]

Any luck with memory card?? My phone is in 9008 mode, but doesn't show up in disk drives. @Manish54

My phone died years ago and i buried it somewhere.
Tried everything for months and years, nothing worked. And now i have stopped rooting phones.