Debrick phone h901 qualcomm 9008
- Thread starter tungkick
- Start date
Flashtool 1.8 download fail at 62sec 
By the way, which dll file should I use?
By the way, which dll file should I use?
Attachments
If you are getting stuck with LG UP, you can try LG Bridge -- it saved my bacon. You will probably need to double click on the blue text that says something like "check for bad flash".
-- Brian
Thanks for the suggestion.. but.. seems like my failed LGup flash attempts are changing the port name from something like "Qualcomm 9008" to "LGE AndroidNet Serial USB", my LG bridge and some other flashing softwares are unable to recognize the port. Even the earlier QFIL only recognize it as "Non QDloader Diag Port". So far only LGup and LG flashtool are able to recognize the port and starting to flash, although none are able to finish it.
It's so confusing, I even trying to re-brick (lol) it to start it over again..
is someone here can read korean ? I found this sticker on my phone's motherboard when i disassemble it
Attachments
You can use google translate on this
Anyone here can you please help me flash modem to v10
Sent from my LG V10 using XDA Labs
can qfil flash modem.bin?
Also what files to fladh if go about that road
Currently my pgobe is working and on except for cell
It has a small null icon on top left corner of cell signal icon
Sent from my LG V10 using XDA Labs
yea it can flash it . as the method with qfil need to extract a kdz file then choose the extracted folder in qfil . the extracted .dz contain modem.bin you can replace it with yours. but don't know if you can flash modem only . another thing you must brick it again to make qfil detect it
Today i finally decided to brick it again to be detected as 9008yea it can flash it . as the method with qfil need to extract a kdz file then choose the extracted folder in qfil . the extracted .dz contain modem.bin you can replace it with yours. but don't know if you can flash modem only . another thing you must brick it again to make qfil detect it
And i was not able to brick it again
Now have to somehow do it from flashing image
Attached is the icon i have on my phone
Sent from my LG V10 using XDA Labs
Attachments
This is the lock screenToday i finally decided to brick it again to be detected as 9008
And i was not able to brick it again
Now have to somehow do it from flashing image
Attached is the icon i have on my phone
No network lock issue
Probably the issue is modem firmware
And i need to find a way to flash modem.bin alone pn it or modem.img
Sent from my LG V10 using XDA Labs
Attachments
I hope someone can help me find a way to flash modem firmware from other kdz files to test and work out my issueyea it can flash it . as the method with qfil need to extract a kdz file then choose the extracted folder in qfil . the extracted .dz contain modem.bin you can replace it with yours. but don't know if you can flash modem only . another thing you must brick it again to make qfil detect it
Sent from my LG V10 using XDA Labs
need help to make dump from kdz
hello dear need help o make dump from kdz so please reply me or send a contact in pm i am from india thanksI read the whole thread, I wanted to share my experience with my bricked device. Here it goes...
I have LG-H961N a dual sim mobile which got bricked when I tried to restart as there was no signal. No display at all but would show Qualcomm HS-USB Qdloader 9008 under ports, but no Qualcomm MSM USB Device under disk drives in device manager. I tried to use H901's dump posted in this thread to get the device to download mode. It would go to download mode but after 10mins (I had to plug it through USB, wait for it to respond and at the 10th minute I would hold the Vol up button to get to download mode). I used 16GB Strontium and 32GB Samsung cards, in both cases I got the download mode. But when I tried LGUP to flash my correct ROM, I would get the message "Invalid KDZ or H901-->H961N". I then tried, your second solution in the thread, to change the device name in KDZ file to make LGUP assume it is the right KDZ. I managed to flash H961N10c (100% flash), it asked for reboot and then dead again.
I then found your post, the python code helped me get the LG-H961N10c (60 and odd GB) dump ready for my device, thank you very much for that :victory:, I didn't realize that creating a dump using KDZ was possible. I used HDD Guru and flashed the dump in 16GB Sandisk card, would loose most of the UserData partition in it as its size is 52GB. The phone got past the LG logo but I got this "Enter password to decrypt storage 30/30 attempts remaining". I searched regarding this issue and found the factory reset as a promising solution. I tried this and the phone would get stuck at the Android bot. It should be because of the UserData partition which is not completely flashed and the device couldn't read the remaining portion to format it.
I now ordered 64GB SDcard to try the same. One thing what I don't understand is this 10min delay to respond with both dump images (either turning on till LG logo or battery charging indication or download mode, can't get the fastboot mode using H961N10c ROM which I got using H901 dump. Maybe fastboot is not made available for LG-H961N). I ordered a new battery as well, assuming it would solve this 10min delay problem (20min before the phone got bricked it was charged in a car for 3hrs or so, would that be a reason?).
Need a little help from you regarding the following:
Is it possible to somehow modify the MBR-GPT partition using the dump image (assuming it has the partition table, please correct me if I am wrong) to reduce the size of UserData partition (52GB) to some 8GB so that the whole thing fits in 16GB card? Thanks.
Refer the following link bro.
https://forum.xda-developers.com/showpost.php?p=68739153&postcount=49
Download KDZ tools from the links given in the above link. Use the command mentioned in the above link to create the dump file, you will need python as well. You need 64GB memory card if your phone's storage is 64GB to make the phone work using the SD card. If you want to get the just the download mode, use EMMC RAW application to copy partitions other than the system partition which is the largest one.
created the tools. Thank him. This didn't work for Nougat in my case (created dumps for LP and MM). I have LG-H961N by the way.
use the short pins methodToday i finally decided to brick it again to be detected as 9008
And i was not able to brick it again
Now have to somehow do it from flashing image
Attached is the icon i have on my phone
Sent from my LG V10 using XDA Labs
Did it twice
Updated the xml to write everytging from the kdz from the qfil
Phone started to the point where it is optimizing apps then went into the dreded bootloop
Now what
If i write f600l kdz using lgup it will also write the modem which i dont want
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone