• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[Dec 10][SD] NexusHD2-FRG83D V1.8 (PPP + RMNET) [Kernel: hastarin r8.5.3_oldcam]

Status
Not open for further replies.
Search This thread

aniym

Senior Member
Jul 13, 2009
121
8
Notification LED not working

Build ver: V1.8
Kernel : r8.5.3
MicroSD: Transcend Class 6 8GB

Hi, I've searched through this thread to find an answer, but haven't been able to.

I'm using the most current version of the ROM (1.8) and everything works except the notification LED. When texts or emails come in, my phone's ringtone and vibration work, but the notification light doesn't come on, except for a half second when i unlock the screen.

In Settings>Sound>Notification, I have Pulse Notification Light set to ON. If left off, the notification light comes on and stays on permanently.

Otherwise, everything works beautifully and is super smooth. Some other people were talking about this same issue but that was on page 191 or so.
 
Last edited:

darren211

Senior Member
Dec 28, 2009
59
1
i love this ROM!!

anyway i have just one problem...its about the camera..the colour is not rely feels good.if there any app to make my camera better ?? or mybe tools saturation..thanks..
 

zenbrain

Member
Dec 23, 2007
8
0
Battery drain issue tip

I've had this rom working on my HD2 for a week.
Very stable, haven't had a single problem the entire week except battery drain!
Some days, it was barely holding half a day out of the outlet. Since I'm a power freak, I have cables everywhere I go, so I never had a problem running out of power.
After reading a lot of forums on other roms, kernels and stuff I couldn't find what was the problem with it.
This morning I tried something... not sure if I were supposed to do it from the start, but in my Windows Mobile mode, I turned on Airplane Mode. So all connections were shut. Booted to Android and voilá! Battery is WAY much better.
According to CurrentWidget, I'm getting as low as 5ma when in standby. Before, it was never below 100ma!

Very satisfied.

Hope it works with other people!
 

djpaan

Member
Nov 9, 2008
5
0
That didn't work for me.

In standby I have 65mA, and with fair usage it goes to 346mA!

I heard some stories that people got 5mA in standby. ANy other advices? BT and GPS are turned off, so is sync.
 

zenbrain

Member
Dec 23, 2007
8
0
That didn't work for me.

In standby I have 65mA, and with fair usage it goes to 346mA!

I heard some stories that people got 5mA in standby. ANy other advices? BT and GPS are turned off, so is sync.


I've been getting as low as 0 mA on standby! No kidding!
Radio I'm using is Leo_RADIO_2.07.51.22_2

Still working perfectly.
I use 3g, wifi, gps eventually, bt in my car... all working well and no battery drain.
Try rebooting it when it is high, make sure everything is off in WM and back to Android.
 

ryo9502

Member
Jan 22, 2010
24
0
hi man!!! great work...
i can say that this is the best built that i've tried so far due to it's speed and compability with almost every apps especially gameloft hd games.
but i get a little problem with multitouch in playing game, for egz. : "avatar"...
the old cam kernel can't perform multitouch correctly. so i tried the mishima and huanyu wich performs multitouch pretty well, but apparently it's only working for 5-10 minutes and then the multitouch is wrong again...
is this a kernel problem? any suggestion for alternative kernels?
T.I.A.
 

p/t_rockstar

Member
Nov 29, 2010
9
0
a quick update if anyone cares

my main peeve with the hd2 on WinDroid has always been the pathetic battery life despite my rather low usage and expectations of the device

anyway last week i went ahead and ponied up for a rooted G2 on 2.3
my usage is still the same (obviously) and battery life is still just as bad, LoL !!!

the g2 is just a tad faster according to SpeedTest and 2.3 has a few extra bells & whistles but nothing to write home about
 

oxk4r

Senior Member
Aug 18, 2010
61
2
Orense
Time and date not syncing

Hi. Since some time ago, the time and date stopped to sync. Some apps as Bussines Calendar aren't syncing neither. Has somebody got this or a similar issue? Thanks
 
Thanks but I was talking about hearing radio no streaming, as in Windows Mobile.

Unfortunately this build will never have radio as it was not part of the stock build that this is based on. If you want radio, it will have to be streamed.

Sent from my NexusHD2-Gingerbread V2.6 using xda premium app.

If I've helped you, please use the thanks button :)
 
  • Like
Reactions: oxk4r
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 66
    [Jan. 1, 2011]: NexusHD2-Froyo V1.9a NAND version (RMNET) is out!
    Please visit here. http://forum.xda-developers.com/showthread.php?t=895059


    If you would like to use a SD version, please read and download V1.8 below.
    V1.8 is the final SD version.

    If you would like to boot this SD version with magldr, you can replace with a new rootfs.img which is patched by nzxtneo.

    NexusHD2-FRG83D V1.8 SD version (PPP + RMNET)

    This is the latest, fastest, stable and clean *stock* Android build for HTC HD2.
    This build includes Google Nexus One's OTA update (FRG83D - Android/Froyo 2.2.1). (released on Nov. 18, 2010)
    Quadrent score is about 1866 when using a sync file system. :)

    Complete backup website (Find the older versions in the link below):
    Mod edit: Link removed

    The default kernel is hastarin r8.5.3_oldcam, please visit his post below for more information:
    http://forum.xda-developers.com/showthread.php?t=787588

    Release Notes:
    • "Stock" build except blocking ads (hosts file is replaced) and adding "H" (HSDPA) icon and battery % icon
    • By default it is hastarin's EVO based kernel (support for PPP), but you can switch to N1 based kernel (support for RMNET) easily.
      Switch to RMNET by executing "conn_RMNET_with_michyprima_R11_AXI.sh" or "conn_RMNET_with_huanyu_HAVS-BFQ-OC-UV-AXI_925mv-0.1.d-n1.sh" in the GScript folder and then reboot.

      Switch to PPP by executing "conn_PPP_with_hastarin_r8.5.3_oldcam.sh" or "conn_PPP_with_hastarin_r8.5.3_eb_oldcam.sh" in the GScript folder and then reboot.

      oldcam means the old camera driver for Nexus One build.
      eb means the older battery driver with extended battery support.

      Install "GScript Lite" from Android Market to execute these .sh files.
      E.g.: You will see the text below if executing "conn_RMNET_with_michyprima_R11_AXI.sh" successfully.
          RMNET is ready.
          michyprima_R11_AXI is ready.
          Finished.
          Reboot required.
    • Create 512 MB data.img (You can specify the different data image size in startup.txt)
    • Rooted: superuser privileges (su and busybox) included
    • Some apps included (Delete any apk files in the AndroidApps folder before first boot if you don't like any of them.)

    What is working:
    • WiFi
    • GPS (works great. I got a location within 15 seconds.)
    • 3G/HSDPA
    • 5MP Camera with flash, auto focus and zoom
    • Camcorder with flash
    • LED status notification
    • Keypad LED control
    • Auto Backlight
    • Bluetooth (BT headset is fully supported in calls, music streaming/A2DP, and files transfer.)
    • Compass
    • G-Sensor
    • Microsoft Exchange ActiveSync
    • WiFi Tethering/Hotspot (works with RMNET. For PPP, please install android-wifi-tether on Google Code)
    • USB Tethering (Please install android-wired-tether on Google Code)
    • USB Mass Storage (You can copy files from PC to PC. But Android apps cannot see the copied files in the phone before rebooting.)

    Tips:
    • The battery power consumption on standby is about 5~7mA (less than 1% per hour) without SetCPU installed.
      • To my knowledge, the battery life is related to the WM ROM, radio version, and all the apps running in the background.
    • The default CPU clock rate is set to 245MHz ~ 998MHz, but you can install SetCPU to overclock.
    • Turn off the live wallpaper for better performance and battery life.
    • Install LauncherPro for a smoother home screen.
    • I have included the following apps in the AndroidApps folder, they will be installed at first boot:
      • DSPManager 1.0.apk
      • ES File Explorer 1.4.8.5.apk
      • Fancy Widget 1.3.0.apk (Time & Weather)
      • Superuser 2.3.6.1.apk
      • TeslaLED 2.0.4 Gala.apk
    • About 3G/HSDPA:
      • The stock Nexus One ROM only shows 3G icon in the status bar no matter if you are in HSDPA or not.
      • You can check under "Settings > About phone > Status > Mobile network type". If it says HSDPA, you are on the 3.5G network ("H" Network).
      • With v1.8, I have included FRG83D_stockbar_add-on_H_icon_and_battery%_icon.zip in the "Android/root" folder.
        • If you don't like this add-on, please delete the folder named "root" located in the "Android" folder before first boot.
          Mod edit: Link removed
    • Please install MoreLocale 2 from Android Market to enable more languages if needed.
    • Please visit Nexus One Help website and try to find the answer when you encounter any software issues on NexusHD2-FRG83(D). Thanks.

    Installation Instructions:
    1. Extract the Android folder (with all files in in) to root of your SD Card. THIS IS IMPORTANT.
    2. If you already have an Android folder on your SD Card DELETE IT OR RENAME IT, because this version MAY BE INCOMPATIBILE with older releases !!!
    3. After copyng everything to your SD Card ensure you have at least 600 Mb free space for data store
    4. After you have done all steps go into Android folder and tap CLRCAD (for working sound), and after that just tap HaRET.
    5. On first run when there is "Creating a new datastore" just give it time to complete, and on first boot be patient and give it time to load everything.
    6. If you get some strange errors, or Android does not work, try to reformat SD card and try everything from the start.
    7. HD2 needs radio 2.08 or above to run Android. If you never upgrade your radio, you may not be able to run Android on HD2.
    >>>> All apps will now function and install correctly. If you have an issue installing an app from the Android Market or another source, then go through the following steps:
    >>>> - Go to Settings > SD & phone storage > Unmount SD card
    >>>> - Now install your app, it will now install correctly and function fine
    >>>> - Go to Settings > SD & phone storage > Mount SD card

    My HD2 WinMo Info:
    ROM: Stock 1.66.709.3 (76641) CHT
    Radio: 2.12.50.02_2

    DOWNLOADS:

    Mod edit: Link removed

    • Please install the latest 7-Zip 9.20 or WinRAR for uncompressing.
    • If upgrading from the previous versions, please copy the original "data.img" to your new extracted Android folder.

    Special thanks:

    - Cotulla - for making all this possible
    - dan1j3l - for rootfs and liblights
    - Markinus - for the "official" EVO kernel
    - hastarin - for the EVO kernel
    - huanyu - for the N1 kernel
    - michyprima - for the N1 kernel
    - Rajko - for the Compass fix
    - mdebeljuh - for the G-Sensor workaround
    - jdivic - for the G-Sensor workaround
    - Letama - for the libhtc_ril_wrapper.so used by PPP
    - aussiebum - for the suggested PPP options
    - bangsters - for setting the size of data.img in startup.txt
    - Cass67 - for the Bluetooth fix with EVO based kernel
    - darkstone - for the readme and his build for reference
    - gauner1986 - for the lights.htcleo.so
    - Geo411m - for the FRG83D Stock, Deodexed, rooted, busybox ROM and add-ons (11/24)
    - mattc - for the tweaks in rootfs
    - memin1857 - for the tips that fix the auto backlight issue
    - NetRipper - for the latest haret.exe (9/14)
    - shu8i - for the readme
    - Bluetooth headsets testers
    - Everyone on #htc-linux & #htc-linux-chat, devs at xda-forums

    If I missed anyone please let me know. Thanks to everyone who made this possible.



    If you appreciate my work and want to buy me a drink, please consider making a donation.

    Thank you.

    Thanks for your generous donations:
    ricklo
    philipdeane
    ghis1
    wildwong
    robrob777
    spyderman33
    sciueps
    bohhem
    mmaner
    and other anonymous donators
    ...


    P.S.: Screenshots below have some apps not included in downloaded 7-zip file.
    12
    FAQ and Changelog

    FAQ:

    If you would like to help others with your experiences, please feel free to share your info below. Thanks.

    Changelog:

    V1.8 (PPP + RMNET)
    • Use hastarin r8.5.3_oldcam kernel in default
    • Letama's libhtc_ril_wrapper.so v0.7 included
    • The PPP options and kernel memory tweaks included
    • Small tweaks for rootfs
    • Microsoft Exchange ActiveSync fixed since FRG83D

    V1.7 (PPP + RMNET)
    • Upgrade to the latest Google Nexus One's OTA update - FRG83D (released on Nov. 18, 2010)
    • Use hastarin r8.2 kernel with G-Sensor fix by (mdebeljuh and jdivic) in default
    • Letama's libhtc_ril_wrapper.so v0.4 updated
    • Auto Backlight issue fixed for RMNET kernels
    • Microsoft Exchange ActiveSync fixed since FRG83D

    V1.6 (PPP + RMNET)
    • Use hastarin r8.1 kernel in default.
    • Specify the WiFi MAC address in startup.txt
    • Auto Backlight issue fixed. (lights.htcleo.so updated)
    • PPP disconnection issue fixed. (libhtc_ril_wrapper.so v0.3 updated)
    • Background noise / mic gain fixed. (htcleo.acdb added)

    V1.5 (PPP + RMNET)
    • Bluetooth works with N1 based kernel and EVO based kernel now.
    • LED status notification (e.g.: missing calls) is working properly now.

    V1.4 (PPP + RMNET)
    • Support both PPP and RMNET data connections, default is PPP (Execute different sh files located in the GScript folder to switch between them quickly and conveniently.)
    • Use hastarin's r7.6 kernel in default (N1 based Bluetooth can't work with Evo based kernel so far. If you need Bluetooth, please switch back to michyprima's R11 kernel)
    • Compass is working now due to the new kernel
    • Touchscreen freeze has greatly reduced due to the new kernel
    • Replace prior media folder with Nexus One's build-in media (There is default ringtone at first boot now.)
    • Small tweaks

    V1.3 (RMNET)
    • Add DSPManager app and the related lib
    • Add some tweaks for Bluetooth headsets and replace some Bluetooth related libs
    • Bluetooth headset is fully supported in calls, music streaming/A2DP, and files transfer now. (But some BT headsets may not be compatible with this build.)

    V1.2 (RMNET)
    • Data upload problem in 3G/HSDPA network has been fixed
    • Some tweaks from mattc's NexusLeo v1.1 build has been included

    V1.1 (RMNET)
    • No green line in HQ YouTube now
    • Restore to the stock libOmx libraries (I replaced some of them in order to fix the broken camcorder when converting into HD2 format from the stock Nexus One ROM. But it causes the green line in YouTube. So restored.)
    • Fancy Widget 1.3.0.apk (Time & Weather) included

    V1.0 (RMNET)
    • Initial release
    11
    How to upgrade the kernel to hastarin's r8.6_oldcam or r8.6_eb_oldcam

    Downloads:
    oldcam means the old camera driver for Nexus One build.
    eb means the older battery driver with extended battery support.
    Please download one of them and extract it to your SD card.

    These kernels are based on hastarin's r8.6_oldcam and r8.6_eb_oldcam branch kernel source code
    and are compiled by tytung with the modified config. (e.g.: CONFIG_CC_OPTIMIZE_FOR_SIZE=y, CONFIG_NLS_UTF8=y, etc.)
    Use them at your own risk.

    Installation (takes hastarin_r8.6_oldcam as an example):
    1. Install GScript Lite from Android Market and run it.
    2. Press Menu (Windows button) and select Add script.
    3. Click Load file and select conn_PPP_with_hastarin_r8.6_oldcam_compiled_by_tytung.sh, and then Save it.
    4. You'll see conn_PPP_with_hastarin_r8.6_oldcam_compiled_by_tytung (Needs su: true) and click it to run and finish the replacement of the kernel and modules.
    5. You'll see the text below if running this .sh file successfully.
    6. Reboot to take effect.

    Code:
    PPP is ready.
    hastarin_r8.6_oldcam_compiled_by_tytung is ready.
    Finished.
    Reboot required.

    P.S.:
    The zImage and .ko files are for all builds that use old camera libs.
    The .sh file is for NexusHD2 build only.
    4
    hi! when I click Haret the loader starts; it displays a few minute lines and then the display just goes blank. any reason for this? i have formatted the SD card already. please suggest.

    kunsam
    --------
    HTC HD2
    2
    Can I use Fm radio (to install app.... ) with this build? not online internet radio :)

    Thank for a stable build!
    No.
    When you use a stock Nexus One phone, you don't have this function too.
    And NexusHD2 is a clean build that been ported from Nexus One.
    I won't add any functions on it.