Defy Overclock. I can't go above 1000mhz

[EtaCarinae]

I'm on PVL-StockPlus based on 4.5.1-134_DFP-231. I came here by restoring PVL-StockPlus system over 4.5.1-134_DFP-231 modded by walter.
I have 4.5.3-109_DPP-11 kernel (I still here from MS2Ginger 3.0, that I had before these two).

Now, the problem is that I can't set custom overclock values. The cpu clock moves between 300mhz-600mhz-1000mhz regardless any overclock.conf setting.

Here is my overclock.conf

enable 1
load_all 1
scaling 2
clk1 300
clk2 600
clk3 850
clk4 1100
vsel1 20
vsel2 30
vsel3 45
vsel4 62
con_up_threshold 80
con_down_threshold 20
con_freq_step 5
con_sampling_rate 160000
int_min_sample_rate 50000
ond_up_threshold 86
ond_sampling_rate 50000
smt_min_cpu_load 20
smt_max_cpu_load 80
smt_awake_min_freq 200000
smt_sleep_max_freq 200000
smt_up_min_freq 1000000
smt_wakeup_freq 1000000
smt_ramp_up_step 200000

EDIT: The problem isn't go above 1000mhz, is with any setting. I try lowering vsel3 and vsel4 below 1000mhz and any cpu monitor shows 300-600-1000 frecuencies. I can't manage frecuencies and vsels. It's stuck at 300-600-1000.

 

[esok44]

I'm on PVL-StockPlus based on 4.5.1-134_DFP-231. I came here by restoring PVL-StockPlus system over 4.5.1-134_DFP-231 modded by walter.
I have 4.5.3-109_DPP-11 kernel (I still here from MS2Ginger 3.0, that I had before these two).

Now, the problem is that I can't set custom overclock values. The cpu clock moves between 300mhz-600mhz-1000mhz regardless any overclock.conf setting.

Here is my overclock.conf

enable 1
load_all 1
scaling 2
clk1 300
clk2 600
clk3 850
clk4 1100
vsel1 20
vsel2 30
vsel3 45
vsel4 62
con_up_threshold 80
con_down_threshold 20
con_freq_step 5
con_sampling_rate 160000
int_min_sample_rate 50000
ond_up_threshold 86
ond_sampling_rate 50000
smt_min_cpu_load 20
smt_max_cpu_load 80
smt_awake_min_freq 200000
smt_sleep_max_freq 200000
smt_up_min_freq 1000000
smt_wakeup_freq 1000000
smt_ramp_up_step 200000

EDIT: The problem isn't go above 1000mhz, is with any setting. I try lowering vsel3 and vsel4 below 1000mhz and any cpu monitor shows 300-600-1000 frecuencies. I can't manage frecuencies and vsels. It's stuck at 300-600-1000.

Have you tried setVsel, good overclocking tool, worked for me on every rom.
defy @ 1200mHz 64vSel...

 

[G3Sidhu]

are you using recovery for overclocking, if yes then make sure that the first option is set to ENABLE or it will only use stock settings.also try setvsel.

Sent from my MB525 using xda premium

 

[cyrusct82]

Watch this post http://forum.xda-developers.com/showthread.php?t=1645086

Sent from my MB526 using XDA