Yes. In case you needed to do so .
Follow below instructions.
This operation requires Root Access (KingRoot version 4.60 apk from here ) and ES File Explorer from Play Store (you must enable root explorer from ES File explorer app)
1). It is necessary to change (or create if not present) the file called custom.bin in folder /data/
Open custom.bin file and edit it as below:
-To go to the Russian location: hw / ru
-To go to Malaysia: hw / spcseas
-To go to China: unicomelectric / cn
-To go to the Middle East or Pakistani firmware: hw / meafnaf
-To go to the Belarusian firmware: mts / by
-To go to the European firmware: hw / eu
IMPORTANT: After you edit the file you must make sure that it's permission is as it was before editing (See and memorize it's original permission before editing).
Correct permissions: ++ 0 ++ 0 ++ 0
2). It is necessary to replace the file called oeminfo in the folder /dev/block/platform/hi_mci.0/by-name/ (See it's Permission before replacing it and make a copy from the original file as well, just in case, better to keep) the new oeminfo files that holds the new desired region or locations
can be found in the downloaded archive. Below link
3). After a successful replacement of the resulting file in a folder, it's size must be zero KB. This is because in this location is not the actual files it's a symbolic links to them.
IMPORTANT: After replacing the file, it must be using below permissions: +++ +++ +++ I usually unnecessary , but verify.
4). Finally restart your phone and go to Settings then check your device model number it will be unknown instead of Che2-L11. (This is completely normal) .
5). Then open updater app and follow the update process normally by downloading the Lollipop firmware that matches the oeminfo location you picked then extract the downloaded zip file from Huawei support page then put UPDATE.APP file in the root of your SD Card inside folder called dload then from the updater app press on local update and make a backup then choose install.
.
I have a complex problem with my Honor 4x Che1-L04. I used this approachused for update my phone but everything is in disarrayrom. Before doing to change oeminfo and replace with original oeminfo file i unlocked bootloader and rooted my phone, and installed custom recover TWRP and there was no problem.
But now I have a lot of problems with my phone:
1. bootloader is locked and I have bootloader unlocked code but is not work
Code:
...
FAILED (remote: Invalid key,u
finished. total time: 0.089s
8pic.ir/images/ey5iawposoedw7sob6ck.jpeg
8pic.ir/images/qcawescqs19kdmml21cm.jpeg
2. TWRP recoveries doesn't work for me.After reboot or use Power key+Down key volume is go to fastboot(rescue mode). If the phone is turned off and then turned on everything works well except:
***** If the image look,themes is different colors(red,blue,...), but it was not previously.
***** slot2 for each SIM card request PUK but the SIM cards in another phone works well.
3-When I upgrade with SD gives me "software update failed ".
I've got a backup by TWRP but i do not have any recovery on your phone and i can not use it
Please help, thank you.