[Depreciated][GUIDE] how to root US LG G Stylo on 5.1.1 and unbrick :) updated on 9/2

Search This thread

king_xerxes

Senior Member
Aug 19, 2009
132
11
Louisville, KY
Been a minute since saying howdy! Hope 2017 was great for ya... 2018 rules already!!!
Will this work with the cricket version it's on 5.1?
thanks 4 taking time 2 respond.
zach

---------- Post added at 08:11 PM ---------- Previous post was at 08:00 PM ----------



Will this work on cricket version lp 5.1?
thanks,
zach


I used this on my son's phone a long time ago, and it worked. It was a Cricket phone.
However, as always use caution!

---------- Post added at 08:16 PM ---------- Previous post was at 08:15 PM ----------

I used this on my son's phone a long time ago, and it worked. It was a Cricket phone.
However, as always use caution!

BTW, you cannot unroot the phone, unless you flash the stock ROM on it.
 
  • Like
Reactions: coolbeans2016

coolbeans2016

Senior Member
Feb 9, 2015
632
161
31
Atlanta
Cricket Stylo 2 on 5.1

Used it on multiple devices!! :good:

Sent from my Palm Centro using XDA Labs

What about Crickets version of Stylo 2 on 5.1?
Any info greatly appreciated.
Asked 6th_hokage and another as well just trying to get as fasta response as possible while reading thread.
Thanks,
zls
 

Attachments

  • aviary-image-1515375295378.jpeg
    aviary-image-1515375295378.jpeg
    96.8 KB · Views: 124
Last edited:

coolbeans2016

Senior Member
Feb 9, 2015
632
161
31
Atlanta
1 last ?

I used this on my son's phone a long time ago, and it worked. It was a Cricket phone.
However, as always use caution!

---------- Post added at 08:16 PM ---------- Previous post was at 08:15 PM ----------



BTW, you cannot unroot the phone, unless you flash the stock ROM on it.

Thankyou! What about TWRP?
Read under OP posts talking about it but no links.
zach
 

Brianmorehead75

New member
Dec 4, 2016
4
0
Nacogdoches
Is there a way to root a straight talk LG stylo 2 model nmbr LGL81AL without a computer preferably ... Kingroot said root granted a couple of times today but lost the root access both times
 

~Barahona~

New member
May 28, 2018
3
0
Thank You Very Much!

I just registered on this page, just to thank you for the help you have provided me to create this thread. I had tried to make root with the software called: LG One Click root. And my phone goes brick. When I tried to turn it on, it didn't go from the Boost Mobile logo, there it would stay forever.
Also, I was very difficult to put the phone in download mode: I had to try several times, and remove the battery and put it back, etc... The phone did not want to get into download mode after I try to do root with the software mentioned above. But thanks to you (6th_Hokage) My phone did recover its normal operation, and I didn't lost any data (photo, music, etc.).
Thank you very much!
(Translate from another language to english with the help of Microsoft/Windows 10 translator: may be errors... Sorry for that).... Oh my god!I gorgot to write my phone model! Itis LG LS665, Boost Mobile.
 
Last edited:

Ainz_Ooal_Gown

Senior Member
Feb 3, 2013
3,846
1,726
27
Los Osos
I just registered on this page, just to thank you for the help you have provided me to create this thread. I had tried to make root with the software called: LG One Click root. And my phone goes brick. When I tried to turn it on, it didn't go from the Boost Mobile logo, there it would stay forever.
Also, I was very difficult to put the phone in download mode: I had to try several times, and remove the battery and put it back, etc... The phone did not want to get into download mode after I try to do root with the software mentioned above. But thanks to you (6th_Hokage) My phone did recover its normal operation, and I didn't lost any data (photo, music, etc.).
Thank you very much!
(Translate from another language to english with the help of Microsoft/Windows 10 translator: may be errors... Sorry for that).... Oh my god!I gorgot to write my phone model! Itis LG LS665, Boost Mobile.

Your welcome bud
 

DarkBader

Member
Dec 17, 2019
14
2
Not work on LG G$ Stylus LL 5.0.2

OPEN = FAIL
WRITE = FAIL....

Device seems to be blocking the pushing of files. Maybe this exploit was patched for G4 :/
 

swordstone86

New member
Mar 28, 2021
1
0
This thread was a lifesaver! I was able to unbrick my LG Tribute 2 LS665ZV3 with these steps, they worked perfectly. Thanks!
 

Top Liked Posts

  • There are no posts matching your filters.
  • 65
    It has come to my attention that this will not work on latest OTA so please only use this if you have the mentioned android number...and I moved on to a LG G3

    Attention if you try this and end up with a brick or your device transforms and tries to destroy you; it's not my fault you did this not me. So just read all of this thread not just the O.P to get out of a bind if you reply with "the thread is too long i wont read it please help" don't expect anything short of "there's a search bar use it"


    Attention If you bricked via trying to root with the 5.0.2 method on 5.1.1 then just run what is below and you will have a fully working and rooted Stylo ;)

    Hello there I and Unjustified Dev have figured out how to root this puppy with the help of a video on YouTube so please read carefully and copy carefully ! (Thanks @Newyork! for helping me clean up my OP)
    1. Make sure you have a Windows PC
    2. Download the LG Drivers from here:
    3. Reboot your device into download mode (press and hold volume up and connect to a power source at the same time)
    4. Download this folder and unzip it to your desktop:
    5. Run ports.bat from within the extracted folder, to find your correct port (use the one with: LGVZANDNETDIAG1)
    6. In the LG_Root folder hold shift and right click and choose open command windows here
    7. Type
      Code:
      Push_File.exe \\.\COM11 busybox  /tmp/busybox

      (Make sure your COM port number is correct, it varies)
      it will then give you a message for example:

      C:\Users\juan\Desktop\LG_Root>Push_File.exe \\.\COM11 busybox /tmp/busybox
      Author : blog.lvu.kr
      File : busybox
      Path : /tmp/busybox

      UNLK : FAIL
      OPEN : OPEN
      TOT FileSize : 1048328

      SendStart
      WRTE : WRTE1048328byte sent

      CLSE: CLSE

    8. Now type
      Code:
      Push_File.exe \\.\COM11 lg_root.sh  /tmp/lg_root.sh
      (same deal as before)
    9. Now type
      Code:
      Push_File.exe \\.\COM11 UPDATE-SuperSU-v2.46.zip  /tmp/UPDATE-SuperSU-v2.46.zip
    10. Now type
      Code:
      Send_Command.exe \\.\COM11
    11. Now type the following
      Code:
      ls tmp
      which will result in:
      #ls tmp
      FAIL
    12. type again
      Code:
      ls tmp
      And you will get the following
      UPDATE-SuperSU-v2.46.zip
      busybox
      lg_root.sh
    13. Now type
      Code:
      sh /tmp/lg_root.sh dummy 1 /tmp/UPDATE-SuperSU-v2.46.zip /tmp/busybox

      which should give you:
      ui_print *****************
      ui_print SuperSU installer
      ui_print *****************
      ui_print - Mounting /system, /data and rootfs
      ui_print - Extracting files
      Archive: /tmp/UPDATE-SuperSU-v2.46.zip
      inflating: META-INF/MANIFEST.MF
      inflating: META-INF/CERT.SF
      inflating: META-INF/CERT.RSA
      inflating: META-INF/com/google/android/update-binary
      inflating: META-INF/com/google/android/updater-script
      inflating: arm/chattr
      inflating: arm/chattr.pie
      inflating: arm/libsupol.so
      inflating: arm/su
      inflating: arm/supolicy
      inflating: arm64/libsupol.so
      inflating: arm64/su
      inflating: arm64/supolicy
      inflating: armv7/chattr.pie
      inflating: armv7/libsupol.so
      inflating: armv7/su
      inflating: armv7/supolicy
      inflating: common/99SuperSUDaemon
      inflating: common/Superuser.apk
      inflating: common/install-recovery.sh
      inflating: mips/chattr.pie
      inflating: mips/libsupol.so
      inflating: mips/su
      inflating: mips/supolicy
      inflating: mips64/libsupol.so
      inflating: mips64/su
      inflating: mips64/supolicy
      inflating: x64/libsupol.so
      inflating: x64/su
      inflating: x64/supolicy
      inflating: x86/chattr
      inflating: x86/chattr.pie
      inflating: x86/libsupol.so
      inflating: x86/su
      inflating: x86/supolicy
      ui_print - Disabling OTA survival
      ui_print - Removing old files
      ui_print - Placing files
      ui_print - Post-installation script
      ui_print - Unmounting /system and /data
      ui_print - Done !
    14. Type
      Code:
      LEAVE
      and press enter and let your device reboot
    15. Don't brick your device now that you have root :)

    edit: works on all known US Variants don't know about the Canadian or European ones (and cricket apparently)....
    7
    Will do, thanks for the heads up, much appreciated. :)

    Here is One Click LP 5.1.1 Root :)


    1- Click Here and Download LGGSTYLO_LP511_OneClickRoot.zip File

    2- Click Here and Download LG USB Drivers ( Thanks @GameTheory. )
    "NOTE: skip Drivers if you have them already install"

    4- Enable USB Debugging via Developer Option.

    5- Decompress LGGSTYLO_LP511_OneClickRoot.zip on Root C: drive for easy access or any convenient location.

    6- Now lets head over where we decompress that zip file and just double " LG_Root_Script.bat "

    7- LET the script run to FULL COMPLETION, Your Device will Reboot twice so be patient.
    IF YOU HAVE YOU DEVICE WITH LOCKSCREEN CODE / SWIPE CODE NEED TO UNLOCK SCREEN ON EACH REBOOT FOR THE SCRIPT TO PROCEED
    ( Check Image for the whole process - CLICK TO SHOW CONTENT )
    NIWunVg.jpg


    8- when the process say
    Code:
     ui_print - Done !

    press Ctrl+C
    press N then ENTER

    ( Check Image - CLICK TO SHOW CONTENT )

    uJStcRm.jpg


    - And you are done your device is now Rooted

    - Phone will Reset and you need to wait till phone is fully Rebooted to system it may take a few minutes so be patient.
    6
    @6th_Hokage
    i was just talking about this with @Unjustified Dev over Hangouts and seems the same process for T-Mobile / Metro as well so will be cool if that Title is edited for T-Mobile and Metro as well....

    P.S. ill be testing process as soon i KDZ my stylo (Tmo) and proceed with TWRP (Custom Recovery) for T-mobile/Metro so you can edit OP with those steps and have a Universal Thread for all Stylos :)
    4
    Okay for sure just want some to try it first

    0k I CAN confirm that ROOT and TWRP (Custom Recovery) for T-MOBILE is a GO and pretty sure same for METRO :fingers-crossed: :good: :highfive: (Thanks @Unjustified Dev)

    PS. i flash latest KDZ v10i and procced with Root after that i Enable OEM Unlock to flash the Custom Recovery (TWRP 2.8.7.0) with FLashify........

    PSS. Because i had a Backup i Restored and got everything back again and no need to reinstall everything again :)

    EDIT 1 - Seems like if we TMO/METRO user want to access Custom Recovery the OEM Unlock must be check all the time @Unjustified Dev is this always this way or there us a way around? cuz when is Uncheck gives:
    "Secure Boot error"
    " Error Code 1003 "
    4
    Worked on my boost mobile stylo. Thanks to the devs who figured this out. :good: :good: :good: