DESIRE Bricked ?? or what is this"

[dainius87]

when i connect usb cable, it shows light on top of the right corner,,
that means its charging.

ok.. if i try to turn it on,

i get this screen:

not wolume down + pwr nor BACK + pwr not working,,

if i connect my mobile to pc, i get it recognized by all RUU's i tried..
but when writing RUU, it HANGS every time on SENDING.....

if i connect it via ADB, and write FASTBOOT DEVICES, it shows my device serial

ok...

lets go back...

everytime i connect usb it connects to pc, sometimes get UNRECOGNIZED USB DEVICE..
if i disconnect USB cable,, i get WHITE Screen in mobile with following info:


---------------------------
BRAVO PVT3 SHIP S-ON
HBOOT-1.02.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.11.05.27
Jul 22 2011, 16:19:16

RUU (in orange background)
-----------------------------
command: 'fastboot flash zip PB99IMG'
i cant flash PB99IMG.zip via ADB because i get "error: cant load PB99IMG"
so what can i do?

ths phone even cant turn on every time i try, if i take back battery for some 30 seconds, than it turns on again....


its some kind of USB Brick or Soft brick or what?

how to solve this?

i tried more than 10 ruu's and almost every time i get the same..

EDIT: i use a GOLDCARD formated as FAT32...

 

[Ravens97]

Have you tried looking at bortak's troubleshooting guide? http://forum.xda-developers.com/showthread.php?t=1275632

 

[dainius87]

yes i was... it says:

"
[4]RUU PROBLEMS
"I tried using a RUU, but it failed, and now my phone is stuck on a black HTC Screen with /!\ In every corner!"

Possible Causes:
- You were S-OFF and you flashed a custom bootloader from alpharev
- You didn't check the MD5 Sums before proceeding, and the download may have been corrupted.
- You tried using the wrong RUU

S-ON
If you're S-ON it eliminates the possibility of you having a custom bootloader, and the only possibility now is that the RUU was corrupted or you used the wrong RUU for your device. Therefore, for this process you need a goldcard.
[STEP1]- Create the goldcard from the tutorial
[STEP1]- Use the WWE RUU"

i have a goldcard, and i used this wwe ruu, so what, ruu stuck on that SENDING.......
this is via PC,,, if i try to do that with GOLDCARD...
i cant.. it says.. ""error: cant load PB99IMG""....

 

[bortak]

yes i was... it says:

"
[4]RUU PROBLEMS
"I tried using a RUU, but it failed, and now my phone is stuck on a black HTC Screen with /!\ In every corner!"

Possible Causes:
- You were S-OFF and you flashed a custom bootloader from alpharev
- You didn't check the MD5 Sums before proceeding, and the download may have been corrupted.
- You tried using the wrong RUU

S-ON
If you're S-ON it eliminates the possibility of you having a custom bootloader, and the only possibility now is that the RUU was corrupted or you used the wrong RUU for your device. Therefore, for this process you need a goldcard.
[STEP1]- Create the goldcard from the tutorial
[STEP1]- Use the WWE RUU"

i have a goldcard, and i used this wwe ruu, so what, ruu stuck on that SENDING.......
this is via PC,,, if i try to do that with GOLDCARD...
i cant.. it says.. ""error: cant load PB99IMG""....

Download fastboot drivers from the revolutioary documentation page

 

[dainius87]

tryed already, but installation wont start,, i doubleclick HTCDriver3.0.0.007.exe and i get nothing on my Win7 x86....

today i get this with Fastboot:

my htc vibrates 1 time, after this short pouse, than it shows WHITE background and HTC logo in center without triangles... than it vibrates 7 times....
adb show me whats in picture..
after about 10 to 20 seconds a device turn off with 7 more vibrations.

wtf ..??

still cant install HTCDriver3.0.0.007.exe.. i think its not compatible with windows 7.. will try on xp later..

 

[dainius87]

since i tryed not all ruu's maybe you can tell me, hhow can i know, which one should fits perfect to me?

ill tryed diferent recovery.img files... some of mthem prompts me :

SIGNATURE CHECKING.....
FAILED (remote: 12 signature verify fail)

some of them (from the latest WWE RUU's):
writing 'recowery'....
signature checking........

and stucks here.. after disconnecting usb cable phone are freezed, need to take out battery for some 15 seconds onl than i am abble to turn it on again..

EDIT: it seems that i can run only fastboot oem enableqxdm 0(unblock your sd-card)
but if i try
fastboot oem eraseconfig(fix misc partition)

i get COMAND ERROR.

 

[dainius87]

seven vibrates can indicate some sort of a CPU or other harware error?

 

[bortak]

Yes, multiple vibrations are a code for some sort of hardware fault. Unfortunately, your phone is probably dead.