Desperately Need Info to Restore

[illdill]

I cannot proceed with restoring my Streak 7 without the following information. Please, this is not meant to be a discussion thread. If you can help out, thanks, if not, please contribute any discussion in my other thread "NVFlash Only Method of Access". This will help to keep the information somewhat organized.

1) I need the partition data from a working unit

Mode: nvflash (Vol Up & Down while plugging in usb)
Command: nvflash --getpartitiontable partitiontable.txt

The outputted text file should specify the exact sectors that the images need to be written to.

Download NVFlash here: NVFlash

2) I need the actual partition img files for all but the System, Boot, & Recovery.

Mode: SAA (nvflash)
Command: nvflash --read x part-x.img (where x is the partition number so you will have to run the command for each partition 2-7)

If you can pull these files for me, I can provide an upload method if you do not have your own.

Again, thank you.

 

[runee]

check your pm for other files.

 

[illdill]

Thank you, thank you, thank you. Except I am not able to download any of the part files. I was able to get the bootloader so the path is accurate, I think the problem is that the .img files will not transport, you will have to zip them. I had the same problem on my server.

 

[runee]

try the img files now.

 

[illdill]

try the img files now.

Awesome! Downloading now.

 

[illdill]

No p15.img. Just about got everything else downloaded, can you get that posted up as well? Thanks again!

 

[illdill]

See next post. Crappy internet connection.

 

[illdill]

I have successfuly restored my Streak 7 using nvflash and the img files provided by Runee. I will work up a how-to as soon as I can make the img files available. Currently I am trying to restore root, but it is not going too well.

Patience and cooperation have been the keys to my success.

It may be a while before I can make the img files available, if someone can get them online before me, awesome. You will need to start with the correct bct and cfg files. I have them included in the nvflash zip below. Also I have created a batch command included in the zip (Restore.bat) that you can launch once you have the 2 through 14 img files in the same directory as nvflash.exe.

http://illdill.org/streak7/files/nvflash.zip