[DEV][24/Nov/2013]Extended TWRP|v2.6.3.4

Search This thread
By:
Advanced…
Dark_Avenger

Dark_Avenger

Senior Member
Apr 17, 2010
397
313
0
Sofia
hoost_pt said:
When I try do Fix Permissions in recovery (TWRP 2.6.3.0) it gives error

Can't check permissions.
(/data/system/packages.xml not found)

Possible reasons:
(a) TWRP detected /data but it's empty.
(b) TWRP can't mount /data properly.​

I already try mount /data first but still no go... :confused:

Edit: Reply from Rom developer Pixelfreak: "i have no packages.xml in my rom... the compile make no packages.xml...i work not with TWRP to much mistakes with this"



Any hint?

TIA
Click to expand...

You are using a ROM with DataOnExt activated. Set the correct path in TWRP -> Settings -> DataOnExt.
 
  • Like
Reactions: kokotas and hoost_pt
mbunal

mbunal

Senior Member
Sep 9, 2009
116
21
48
hoost_pt said:
When I try do Fix Permissions in recovery (TWRP 2.6.3.0) it gives error

Can't check permissions.
(/data/system/packages.xml not found)

Possible reasons:
(a) TWRP detected /data but it's empty.
(b) TWRP can't mount /data properly.​

I already try mount /data first but still no go... :confused:

Edit: Reply from Rom developer Pixelfreak: "i have no packages.xml in my rom... the compile make no packages.xml...i work not with TWRP to much mistakes with this"



Any hint?

TIA
Click to expand...

i think you are use dataonext but you didint set up yet. setup dataonext from menu settings -> dataonext
 
  • Like
Reactions: hoost_pt
hoost_pt

hoost_pt

Senior Member
Jan 21, 2009
319
60
0
Lousada
Dark_Avenger said:
You are using a ROM with DataOnExt activated. Set the correct path in TWRP -> Settings -> DataOnExt.
Click to expand...



mbunal said:
i think you are use dataonext but you didint set up yet. setup dataonext from menu settings -> dataonext
Click to expand...

Ok. I will try and report later.

TWRP is new for me ;)

Thanks for your help

Edit: All ok after setting DataOnExt in settings. :thumbup:


Enviado do meu PIXELDROID HD2 utilizando Tapatalk 4
 
Last edited:
Dark_Avenger

Dark_Avenger

Senior Member
Apr 17, 2010
397
313
0
Sofia
Hi kokotas,
long time I didn't report any bugs :), it's time to do it again. Yesterday I switched my phone to the latest version 2.6.3.0. I decided to play with nilfs2 on sd-ext as I've managed to compile Marc's kernel with nilfs2 support. It seems that conversion to nilfs2 is broken. I've tried with/without keeping the sd-ext content, but in both cases the process finished in a second "successful". "SD card check" lists this partition as nilfs2, but after reboot to recovery it's back to ext4. From Android this partition is visible as ext4 too, even the mount is auto. Do you have an idea what is wrong here?
Also when you try to restore a file "sd-ext.nilfs2.win" it fails with "Unable to wipe /sd-ext - unknown file system".
Regards!
 
Last edited:
  • Like
Reactions: kokotas
kokotas

kokotas

Senior Member
Oct 23, 2007
714
1,570
133
Athens
Dark_Avenger said:
Hi kokotas,
long time I didn't report any bugs :), it's time to do it again.
Click to expand...
Hi Dark_Avenger,

Thanks for the updated theme and for the feedback:good:
To be honest I'm afraid that, since version 2.5.0.5, my attempt to keep up with TWRP's mainline updates has brought up more cons than pros.
Last week I reinstalled Linux on my PC and started working on TWRP using CM10.2 from the start (till now I was using CM9 sources) and focusing on making a less experimental/buggy extended twrp.
Also, I will probably stop porting every single commit from the mainline.
As for the nilfs2 problem, it's been a long time since I wrote and tested that, but I will check it during the weekend.
On a side note... my leo is starting to show its age:( and I wont be stressing it till I get a new device, hopefully around Xmas.

Regards!
 
  • Like
Reactions: eclyptos, gilbert32, bojanbl and 1 other person
Dark_Avenger

Dark_Avenger

Senior Member
Apr 17, 2010
397
313
0
Sofia
kokotas said:
Last week I reinstalled Linux on my PC and started working on TWRP using CM10.2 from the start (till now I was using CM9 sources) and focusing on making a less experimental/buggy extended twrp.
Also, I will probably stop porting every single commit from the mainline.
Click to expand...

Hi kokotas,
the most important feature for recovery is its reliability. I prefer stable/"less experimental/buggy extended twrp" instead of recovery that will fail when I'll really need it, but have all main line commits.
You have my support for this. +1
Best
 
Dark_Avenger

Dark_Avenger

Senior Member
Apr 17, 2010
397
313
0
Sofia
Hi @kokotas,
did you remark that the DST time is wrong? If you deselect the DST checkbox the time is correct, but not with checkbox checked.
Also curtain is not loaded from the theme anymore with 2.6.3.3 :)
Regards!
 
Last edited:
  • Like
Reactions: kokotas
kokotas

kokotas

Senior Member
Oct 23, 2007
714
1,570
133
Athens
Dark_Avenger said:
Hi @kokotas,
did you remark that the DST time is wrong? If you deselect the DST checkbox the time is correct, but not with checkbox checked.
Also curtain is not loaded from the theme anymore with 2.6.3.3 :)
Regards!
Click to expand...

Hey Dark_Avenger,

I haven't seen anything wrong with the clock. Having DST unchecked the time is correct. If I try to check DST and then "Set Time Zone" the clock is set forward one hour. Am I missing something?
As for the theme's curtain I will have to take a look...

Thanks for your feedback:good:
 
  • Like
Reactions: eclyptos and Dark_Avenger
Dark_Avenger

Dark_Avenger

Senior Member
Apr 17, 2010
397
313
0
Sofia
kokotas said:
Hey Dark_Avenger,

I haven't seen anything wrong with the clock. Having DST unchecked the time is correct. If I try to check DST and then "Set Time Zone" the clock is set forward one hour. Am I missing something?
As for the theme's curtain I will have to take a look...

Thanks for your feedback:good:
Click to expand...
Hi @kokotas,
Maybe I misunderstand the correct behavior of DST checkbox. I though that when DST is checked the time will be automatically adjusted (move one hour up and down without my intervention) and when is not checked it will stay untouched. At least this is how it works on my other device with the original TWRP 2.6.3.0 (tested right now and check/un-check DTS checkbox does not change anything, but will change it on summer) :). I compared the code in action.cpp and it's a little bit different between original and extended TWRP. The ui.xml timezone list items differ as well.
Best
 
Last edited:
walter79

walter79

Recognized Developer
Dec 18, 2006
4,100
4,621
263
Did recovery 2.x kernel support xattr for yaffs2 and ext4? If not could you compile it with 3.x kernel. It supports xattr for yaffs2
 
Dark_Avenger

Dark_Avenger

Senior Member
Apr 17, 2010
397
313
0
Sofia
Last edited:
walter79

walter79

Recognized Developer
Dec 18, 2006
4,100
4,621
263
It is enabled but not working. There is something missing in /fs/yaffs2 . I used 2.6.35 for cwm 6.0.4.4 recovery but no luck with yaffs2 and xattr. But works well with 3.x.
 
walter79

walter79

Recognized Developer
Dec 18, 2006
4,100
4,621
263
Same problem like 2.6.35. You can test it with a desire Kitkat rom. replace boot.img and delete device detection in updater.script
 
Last edited:
kokotas

kokotas

Senior Member
Oct 23, 2007
714
1,570
133
Athens
Hi walter79,
walter79 said:
Did recovery 2.x kernel support xattr for yaffs2 and ext4? If not could you compile it with 3.x kernel. It supports xattr for yaffs2
Click to expand...
The kernel used until now (tytung's jb 2.6.32), was not set to use yaffs xattr.
I tried the 3.0.16 kernel once, but there were issues like adb and flashutils not working.
Today I compiled tytung's 2.6.32 kernel with yaffs xattr and included it in Extended TWRP.

Regards!
ps: Don't know if it matters but I used cm 11.0 sources.
 
  • Like
Reactions: eclyptos, symbuzzer, philipped346 and 1 other person
Dark_Avenger

Dark_Avenger

Senior Member
Apr 17, 2010
397
313
0
Sofia
Hi @kokotas,
thanks for the "curtain not loading from theme" bug fix. Curtain is loading now, but it seems that it's loaded also if I switch to build-in theme :).
Did you check the action.cpp difference for timezone setting code?
P.S. I saw that the curtain.jpg is now extracted to TWRP/theme folder in SD card :) Probably you have to delete or ignore this file when build-in theme is used.
Regards.
 
Last edited:
kokotas

kokotas

Senior Member
Oct 23, 2007
714
1,570
133
Athens
Dark_Avenger said:
Hi @kokotas,
thanks for the "curtain not loading from theme" bug fix. Curtain is loading now, but it seems that it's loaded also if I switch to build-in theme :).
P.S. I saw that the curtain.jpg is now extracted in TWRP folder in SD card :) Probably you have to delete this file when build-in theme is used.
Click to expand...
You've got it right :) The curtain.jpg deletion was indeed supposed to happen in case you selected to use the built-in theme, but there was a copy/paste mistake in the code that, unfortunately, I found after:eek: compiling and uploading the files here. I've already fixed it, and will re-upload the files
Dark_Avenger said:
Did you check the action.cpp difference for timezone setting code?
Click to expand...
I didn't compare it with the uptodate mainline code, but I remember that there was something strange with it at the time I edited it. Will check it out.

Regards!

EDIT: New compiled files attached at 1st post. (Did not increase version number)
 
Last edited:
  • Like
Reactions: eclyptos, NYLimited, 0n3j0k3 and 3 others
DumF0rGaming

DumF0rGaming

Recognized Translator
Jan 8, 2013
805
667
123
Dubai
Seems like themes are broken in the latest build. When I confirm any theme it stucks on System Busy or stucks on nothing if I check DataOnExt. And then I should remove my battery and delete .twrps file to get TWRP working again. Am I miss something?

My specs:
PrimBL HSPL 2.08 8G XE SecBL cLK 1.6.5.0 Developer Edition by dan1j31
ROM NexusHD2-KitKat-CM11.0 v4.2 by tytung (Data-On-Ext)
Kernel tytung_jellybean_r2 Performance ART, 1036Mhz, SmartassV2, CFQ
Partition Misc: 1Mb Recovery: 9Mb Boot: 5Mb Sboot: 5Mb System: 391Mb Cache: 10 Mb Userdata: 0Mb
 
Dark_Avenger

Dark_Avenger

Senior Member
Apr 17, 2010
397
313
0
Sofia
DumF0rGaming said:
Seems like themes aren't working in the latest build. When I confirm any theme it stucks on System Busy or stucks on nothing if I check DataOnExt. And then I should remove my battery and delete .twrps file to get it working again. Am I miss something?
Click to expand...

I'm using the latest v2.6.3.4 with my theme in comment #5 without issues for several months.
 
You must log in or register to reply here.

Similar threads

kokotas
[DEV][02/May/2015]unOFFICIAL TWRP|v2.8.6.1
Replies
653
Views
207K
D
danvokez
S
[10.FEB.13]Recoveries [TWRP, CWM]
Replies
24
Views
6K
NYLimited
NYLimited
S
[24 SEP 2012][DEV] HWA Kernel For HD2
Replies
1K
Views
332K
NYLimited
NYLimited
J
[DEV] Data on HD2 (ril tweaks)
Replies
83
Views
32K
Visentinel
Visentinel
arif-ali
  • Poll
[DISCONTINUED][CWM/cLK] Revolution HD v2.6.2 & SL v1.4.2
Replies
258
Views
133K
T
torberry

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 104
    kokotas
    kokotas
    Intro:
    ---------------------
    Extended TWRP is based on official Team Win Recovery Project, but modified** to address some special methods & features found on The HD2,
    a device which has 3 different android loaders (cLK, MAGLDR and Haret) and various Android Rom configurations (DataOnExt, NativeSD, SD, Nand).
    ** If you are just looking for an unmodified TWRP for the HD2, check here.

    I take no credit for this. All the creative hard work was already done!
    Credits to:
    • agrabren, Dees_Troy, ViViDboarder, and AssassinsLament - core twrp 2 development team.
    • Toastcfh – for his underappreciated dedication to the community.
    • s0up and kevank - for their hard work on the web side of things.
    • shift, onicrom, netarchy, kevank, myndwire, bigbiff, dkelle4, shinzul, spiicytuna, and eyeballer - the rest of Team Win.
    • Amon_RA - for his great Recovery.
    • Koush - for his dedication to the community and ClockworkMod.
    • Akmzero, arif-ali, Evil_DevNull, gus6464, Jesusice, _jmz_, NxtGenCowboy, ohshaith55, Pyrostic, [R], and Rootzwiki - for all the help with devices and testing.
    • Team's supporters and the Android Community.

    However, if you think that this extended version is full of unnecessary cr*p or that something is not working as expected anymore,
    Credits to:

    Notice:
    ---------------------
    For me, this thread is about learning while having fun. It would be ideal if it leads to something that is really useful.
    So, as you may have already understood, This Is Not a release thread. If you have the time and interest to help in any way, please do. Cause together we can make sure that this project will benefit all of us.
    The attached recovery image is provided for people who can't compile it from source, but want to either help in debugging or just experiment.
    • Have in mind that before attaching it here, it was only tested on one HTC-HD2(Eu) powered by (black) cLK bootloader.
      The performance on devices powered by MAGLDR bootloader or running the good-old WM6.X should be considered untested.
      In order to exploit the full potentials of this software, Black cLK bootloader is strongly recommended!
    • As usual, use at your own risk. TeamWin or kokotas is not responsible for anything bad that may occur from using Extended TWRP.
    • ReadMe

    Features:
    ---------------------
    • **************Mainline**************
      * Ability to save custom recovery settings
      * Touchscreen driven with real buttons and drag-to-scroll
      * XML-based GUI that allows full customization of the layout – true theming!
      * Settings are saved to the sdcard and persist through reboots
      * Ability to choose which partitions to back up and which to restore
      * Ability to choose to compress backups – now with pigz (multi-core processor support for faster compression times)
      * Ability to backup large partitions (size>1.5GB) by splitting the backup archive.
      * Basic file manager (copy, move, delete, and chmod any file)
      * OpenRecoveryScript scripting engine
      * On-screen keyboard in recovery! -- supports long press, backspace repeat, and swipe left deletes everything left of the cursor
      * ADB sideload functionality from AOSP
      * Pseudo-terminal emulator
      * Decryption support
      * Ability to set a timeout for auto-turning off the screen
      * exFAT support for sdcard's 1st partition
      * Manual screen rotation
    • **************Extended**************
      * Proper detection of bootloader(cLK/MAGLDR/haret)
      * Support for cLK's extra boot partitions
      * Tweaked off-mode charging for cLK (device can wake up by pressing any key)
      * Direct rebooting to selected boot partition for cLK bootloader
      * Direct rebooting with selected kernel from NativeSD folder for MAGLDR bootloader
      * Ability to communicate with cLK in order to change partitions' size if needed
      * Built-in NativeSD manager(Backup - Restore - Delete - Fix Permissions - Wipe Data - Wipe Dalvik-Cache - [cLK]Kernel-Restore)
      * Option to skip any NativeSD Rom during sd-ext's partition backup
      * Option to adjust backup/restore process for DataOnExt method
      *
      * Nilfs2 support for sdcard's ext(2nd/3rd primary) partition
      * NTFS support for sdcard's 1st primary partition
      * Option for converting file system [ext2 - ext3 - ext4 - nilfs2] of sdcard's ext partition (without losing any data if there is enough space on the /sdcard)
      * Option for adding a 3rd primary partition(mmcblk0p3 as /sdext2)
      * Option to skip dalvik-cache during backup
      * Ability to restore backups that were made using a CWM Recovery
      * Ability to check SD Card's filesystem(s)
      * Ability to run shell scripts from your SD Card (script location: /sdcard/TWRP/scripts)
      * Ability to "run" recovery (AROMA based) apps with one click (app location: /sdcard/TWRP/app)
      * Ability to select current theme (example of theme file location /sdcard/TWRP/theme/MyTheme/ui.zip)
      * Ability to check the size of the backup to be restored
      * Ability to take screenshot (screenshots location: /sdcard/TWRP/screenshots)
      * Configurable haptic feedback
      * Configurable system tweaks (cpu gov, cpu freq, i/o sched, drop_caches)

    Source:
    ---------------------

    Looks:
    ---------------------

    Download:
    ---------------------


    Frequent issues:
    ---------------------
    1. If you report an issue without a log and/or without details, that's not very helpful in tracking down that issue, so, eventually, don't expect any assistance cause I am not a medium.
    2. If you get a "status 2" error when installing a recovery-update-package(zip) that used to work with your old recovery, change the update-binary inside the zip file with a newer one (API 3).
      DON'T FORGET to check the syntax in the updater-script and verify that format() and mount() commands have the correct amount of arguments, otherwise you'll end up having other errors like "status 7".
      i.e. if you use the update-binary included in the attached file below, format takes 2: format("MTD", "boot").
    3. If you occasionally can't boot into recovery, try increasing the size of its partition >= 10MB.

    Installation:
    ---------------------

    • [Basic stuff before installing]
      • Make sure you have adb and fastboot working (required files here). Please don't ask here questions about this - a simple web search will be enough to help you.
      • Make sure that the size of the 'recovery' partition is enough for the image to fit.
      • Make sure the name of the recovery *.img file is the one you use in the commands or in flash.cfg
    • [Flashing occasions]
      • [cLK/MAGLDR]
        Flashing the zip file from existing Recovery
        1. Download zip file to your computer and copy to /sdcard.
        2. Reboot phone into recovery.
        3. Select to install the zip file from your /sdcard.
        4. Reboot Phone into recovery as normal.
      • [cLK/MAGLDR]
        Flashing the *.img file while booted in Android or in Recovery
        1. Download the recovery file to your computer.
          If it is a zip file, extract the *.img.
        2. (Win) Open the folder you have the recovery, do a [Shift+RightClick] and select "Open command window here".
          (Lnx) Open the folder you have the recovery, RigthClick and select "Open in Terminal".
        3. Execute the commands:
          Code: 
          adb push recovery.img /sdcard/recovery.img
adb shell erase_image recovery
adb shell flash_image recovery /sdcard/recovery.img
        4. Reboot Phone into recovery as normal.
      • [cLK]
        Flashing the *.img file while in fastboot mode(cLK menu)
        1. Download the recovery file to your computer.
          If it is a zip file, extract the *.img.
        2. (Win) Open the folder you have the recovery, do a [Shift+RightClick] and select "Open command window here".
          (Lnx) Open the folder you have the recovery, RigthClick and select "Open in Terminal".
        3. Reboot phone into cLK menu (fastboot mode).
        4. If needed, change the size of the 'recovery' partition on the fly (under SETTINGS/RESIZE PARTITIONS).
        5. Execute the commands:
          Code: 
          fastboot erase recovery
fastboot flash recovery recovery.img
fastboot oem boot-recovery
      • [MAGLDR]
        Flashing the *.img file while in USB Flasher mode(using DAF.exe)
        Code: 
        [B][COLOR="Red"]WARNING!!![/COLOR] This way of flashing will erase your current Rom on NAND too!
You will probably want to do this
[COLOR="Red"]ONLY IF[/COLOR] you need to increase the size of the 'recovery' partition![/B]
        1. Download the recovery file to your computer.
          If it is a zip file, extract the *.img.
        2. Open the folder you have the recovery and place DAF.exe and flash.cfg in that same folder.
        3. Edit flash.cfg according to required recovery partition size:
          Make sure the .img file has the name that flash.cfg specifies!!
          i.e. If the *.img file is named recovery.img and min-required-size = 8MB then the flash.cfg could be:
          Code: 
          misc ya 1M
[U]recovery rrecov|ro|nospr 8M recovery.img[/U]
boot yboot|ro 5M
system ya 150M
cache ya 2M
userdata ya|asize|hr allsize
          Check out the info about flash.cfg.
        4. Connect the device to the computer via usb, enter MAGLDR and select USB Flasher option.
        5. Right click on DAF.exe and select Run as Administrator.
        6. Click [NEXT] when asked and wait to finish.

    Post-Installation:
    ---------------------
    1. Make sure you delete /sdcard/TWRP/.twrps.
    2. If you're using a theme, update your theme file or temporarily switch to the default theme.

    A big Thank-You for supporting/testing the ExtendedTWRP to:
    ---------------------

    • Dark_Avenger
    • NYLimited
    • DarrenNewsgroup
    • Nixda99
    • MarkAtHome
    • Robbie P
    View
    37
    kokotas
    kokotas
    Timeline


    • HD2_Extended_TWRP_2.6.3.4 @ 2013.11.24
      1. Compiled tytung's jellybean kernel with CONFIG_YAFFS_XATTR=y
        and replaced existing recovery kernel.
      2. Attempt to fix curtain.jpg loading bug.
    • HD2_Extended_TWRP_2.6.3.3 @ 2013.11.20
      1. Reverted to 2.x kernel (more stable and smaller size).
    • HD2_Extended_TWRP_2.6.3.2 @ 2013.11.20
      1. Ported latest mainline commits.
      2. Compiled without ntfs and exFat support (since no existing HD2 Rom really requires any of them).
      3. Switched to 3.x kernel (github.com/TeamNightmare/android_kernel_htc_leo).
    • HD2_Extended_TWRP_2.6.3.0 @ 2013.09.19
      1. Ported latest mainline commits (update to v2.6.3.0).
      2. Disabled the ability to encrypt the backup of the data partition. Rolled back to old twrpTar code in an attempt to temporarily fix some backup/restore errors.
        (The backups made by previous versions might not be good).
    • HD2_Extended_TWRP_2.6.1.2 @ 2013.09.09
      1. Fix crashing when installing a recovery-package.
      2. Added "bootloader=haret" to startup.txt for haret's case.
    • HD2_Extended_TWRP_2.6.1.1 @ 2013.09.06
      1. Reverted a commit that messed up the rotation feature.
      2. Attempt to improve bootloader detection.
    • HD2_Extended_TWRP_2.6.1.0 @ 2013.08.31
      1. Ported latest mainline commits (update to v2.6.1.0).
    • HD2_Extended_TWRP_2.6.0.0 @ 2013.07.16
      1. Ported (most of the) latest mainline commits (update to v2.6).
      2. Ported Vojtech Bocek's screen rotation.
        Old themes are not compatible!
        Instead of one ui.xml file, the new theme requires two files portrait.xml and landscape.xml and the appropriate images.
      3. Misc code cleanups/fixes.
    • HD2_Extended_TWRP_2.5.0.5 @ 2013.05.10
      1. Try to fix libtar bug (present when creating sd-ext's backup).
      2. Reboot options for "recovery" and "bootloader" will be available for cLK only.
      3. Revised nativeSD manager.
    • HD2_Extended_TWRP_2.5.0.4 @ 2013.05.08
      1. Made partitionlist's selection persist.
      2. Added ability to load selected theme's curtain.jpg.
      3. Fixed slider-touch.png, changed list's header separator color to red and reordered header info in built-in theme.
      4. Revised how twrp handles 'userdata' partition when DataOnExt mode is.
        Cause there is a chance 'DalvikOnNand' method is used.
      5. Cleaned up unused code and added a flag for HD2-specific stuff so if anyone would try to build Extended TWRP for another device it would be easier.
    • HD2_Extended_TWRP_2.5.0.3 @ 2013.05.06
      1. Added "View file" under filemanager options (it's more or less like 'cat /file').
      2. Small fix to off-mode charging.
      3. Attempt to fix progress bar issue.
      4. Changed built-in theme. The new one is based on Dark_Avenger's Holo Dark.
      5. Changed some log messages.
    • HD2_Extended_TWRP_2.5.0.2 @ 2013.04.22
      1. Changed behavior of "Reset Defaults". Device will reboot after that.
      2. Changed handling of extra boot partitions for cLK.
        Now you can backup/restore/wipe any of those partitions just like the default ones!
        (In the end this means that you can backup/restore EVERYTHING at once)
      3. Changed versioning way (last digit will be used for the extended revision).
      4. Changed screenshot function:
        If the system is busy (perhaps doing something (?) to the sdcard) no screenshot will be taken if you press the top logo.
        Otherwise, in order to notify the user that a screenshot was successfully taken the keys backlight will blink.
      5. Reorganized/rewrote some of the code (backup/restore/wipe) around "partitionlist".
      6. Removed sfdisk.
      7. Recompiled tytung_jellybean_r2 kernel with increased MSM_MAX_PARTITIONS to 20 (this will fix the detection of cLK's extra boot partitions).
      8. Misc fixes that I don't remember now...
    • HD2_Extended_TWRP_2.5.0.0_r1 @ 2013.04.17
      1. Ported latest mainline commits (update to v2.5).
      2. Fixed battery_thread().
      3. Added ability to auto delete logs from cache to free up some space when needed (see Dark_Avenger's post).
      4. Switched kernel to tytung_jellybean_r2.
      5. Misc fixes.
      6. Compiled img with TW_INCLUDE_CRYPTO = true & TW_INCLUDE_JB_CRYPTO = true.
      7. Increased required min size to 9MB.
    • HD2_Extended_TWRP_2.4.4.0_r7 @ 2013.04.05
      1. Attempt to fix /sdcard mounting issues in case of slow cards(thanks to Darren for helping).
      2. Fixed restoring a tar that was made with a previous version that used busybox tar.
    • HD2_Extended_TWRP_2.4.4.0_r6 @ 2013.04.03
      1. Attempt to fix archive extraction during restore.
      2. Added separate option for excluding dalvik-cache from a NativeSD Rom's backup under NativeSD Manager Settings.
    • HD2_Extended_TWRP_2.4.4.0_r5 @ 2013.04.02
      1. Attempt to fix timezone dst settings.
      2. Revised extractTarFork() function.
    • HD2_Extended_TWRP_2.4.4.0_r4 @ 2013.03.31
      1. 3rd attempt to fix sdcard partitioning.
      2. Added option for magldr users to select which NativeSD Rom to reboot to(jskenderi's idea).
      3. Fixed cpu governor selection not getting applied at boot.
      4. Removed "read_ahead_kb" tweaks from init.rc.
      5. Revised LoadValues() function.
    • HD2_Extended_TWRP_2.4.4.0_r3 @ 2013.03.22
      1. 2nd attempt to fix sdcard partitioning.
      2. Changed "Enable MD5 verification" to "Skip MD5 verification" - The default behavior is to verify md5s.
      3. Fixed a bug regarding backing up with "Exclude NativeSD Roms..." option enabled.
    • HD2_Extended_TWRP_2.4.4.0_r2 @ 2013.03.20
      1. First attempt to fix sdcard partitioning.
      2. Ported latest mainline md5sum fix.
      3. Fixed NativeSD dalvik wipe.
      4. Replaced the option for the preboot scrict with an option to force TWRP to handle boot partition as 'mtd'.
        Only MAGLDR users will be able to see it AND in case your "boot" is raw (rboot was used in flash.cfg), enable it!
    • HD2_Extended_TWRP_2.4.4.0_r1 @ 2013.03.14
      1. Ported latest mainline commits.
      2. Updated/fixed clkpartmgr (needs cLK v1.5.2.0 to work correctly) - partition size is passed in blocks.
      3. Revised storage partitioning method.
      4. Enabled ntfs and exFat formats for card's 1st primary partition.
      5. Switched to libtar for archive handling.
      6. Switched to libblkid for filesystem detection.
      7. Added more options for haptic feedback.
      8. Added option under "Settings" for the preboot scrict that sets the filesystem for "boot" partition before recovery loads recovery.fstab.
        If your bootloader is MAGLDR and "boot" is raw, disable it. IN ANY OTHER CASE leave it enabled.
        If you don't know what I'm talking about, leave it enabled.
      9. Kernel is compiled with defaults: gov = performance, i/o scheduler = deadline, cpu freq = (245 - 998)MHz
      10. SD Card read_ahead_kb set to 2048, NAND's partitions read_ahead_kb set to 128
      11. Added system tweaks options (cpu gov, i/o scheduler, cpu max/min freq, available memory boost).
      12. If we want to have a theme setting persisted there is a new function <action function="save"> instead of <action function="set">.
    • HD2_Extended_TWRP_2.4.3.0_r3 @ 2013.03.04
      1. Reverted the way TWRP handles 'boot' partition's file-system.
        Backup/restore for MAGLDR should work now.
      2. Ported the dim effect before screen turns off from mainline.
      3. Misc small changes in code.
    • HD2_Extended_TWRP_2.4.3.0_r2 @ 2013.03.02
      1. Reverted fileselector to clear by default the data variable.
    • HD2_Extended_TWRP_2.4.3.0_r1 @ 2013.03.01
      1. Ported mainline commits (update to 2.4.3.0).
        One of them fixes the fileselector bug.
      2. 1st attempt to fix UI's bug (hot-rebooting after theme changing).
    • HD2_Extended_TWRP_2.4.2.0_r2 @ 2013.02.27
      1. Fixed screen timeout not being loaded at boot (instead it was always 60 sec).
      2. Added haptic feedback and an option to enable it under "Settings".
      3. Fixed screenshot feature.
    • HD2_Extended_TWRP_2.4.2.0_r1 @ 2013.02.25
      1. Added option for the root checking stuff. If you don't want TWRP messing with your system you have the option to disable it under "Settings".
      2. Added option to select the clock-time format.
      3. Cleaned up blanktimer.
    • HD2_Extended_TWRP_2.4.1.0_r3 @ 2013.02.24
      1. Ported latest mainline commits.
        Some of them were already in Extended TWRP(button highlight and 24h clock)
        One of them added a "Screen" button under "Settings" which gives you the option to
        (a)set the timeout for auto-turning-off the screen and
        (b)set the level of screen brightness.
      2. Created separate thread for monitoring battery capacity and usb status.
        Led will work as normal. I've also set it to blink the amber led if battery < 10%.
      3. Tweaked offmode-charging (this is for cLK users that don't use cLK's built-in offmode charging mode).
        Fast charging is enabled in kernel and 'Powersave' settings will be used.
        Also added the ability to wake up the device while offmode-charging by pressing ANY key.
      4. Removed unused/duplicate options from "Settings".
      5. When you skip dalvik-cache during a backup, a file named .nodalvikcache will be created in the backup folder with the size of dalvik-cache stored inside.
        This will be used whenever you restore that backup in order to add that size to the calculations for minimum partition's size.
      6. In case the '.nodalvikcache' file doesn't exist there is an option to set the increment(%) for the size of the partition to which a backup that doesn't contain dalvik-cache will be restored. Default value is 40%.
      7. Changed the way TWRP handles 'boot' partition's file-system. It doesn't depend anymore on which bootloader we have (cause MAGLDR supports both yaffs2 and raw mtd).
        Code: 
        Dropped the logic:
If cLK => mtd
else => yaffs2
        Now it really checks the file-system.I think:p
      8. Added the ability to restore a backup made with cLK as bootloader on MAGLDR.
      9. ...
    • HD2_Extended_TWRP_2.4.1.0_r2 @ 2013.02.11
      1. Moved option for backing up nand's userdata to BACKUP page.
      2. Instead of Data show DataOnExt or DataOnNand accordingly.
      3. Added option under "SETTINGS" page to let TWRP check if a partition's size is enough for its backup to be restored before tar throws an error caused of insufficient space.
        MAGLDR users: if the selected part of your backup is larger than the actual size of the partition, this part will be excluded from the restore process.
        cLK users: Update to v1.5.1.9 and size mismatches will be no problem, since TWRP and cLK will automatically resize any partition that needs resizing.
      4. Show progressbar during NativeSD backup.
      5. Updated clkpartmgr (the args passed to it have changed too).
    • HD2_Extended_TWRP_2.4.1.0_r1 @ 2013.02.06
      1. Port mainline commit(TWFuncc::Get_Folder_Size and MD5 checking).
      2. Added function for finding a file on storage using the file's name and used it in OpenRecoveryScript.
      3. Add clkpartmgr to TWRP.
    • HD2_Extended_TWRP_2.4.0.0_r8 @ 2013.02.01
      1. When restoring a backup with DataOnExt show 'data' instead of 'sd-ext' under Restore page.
      2. Always reset Use_unyaffs_To_Restore to false.
      3. Fix Recreate_DataOnExt_Folder().
    • HD2_Extended_TWRP_2.4.0.0_r7 @ 2013.02.01
      1. Created separate thread for updating time clock in order to avoid having it frozen.
      2. Fix for sd-ext button disappearing after wiping.
      3. Recreate folder for DataOnExt after wiping sd-ext.
      4. Port last mailine commits.
    • HD2_Extended_TWRP_2.4.0.0_r6 @ 2013.01.31
      1. Fixed backup part selection when there are split archives.
      2. Corrected free space calculation in FS-converting and NativeSD-backup.
      3. Time format changed to hh:mm:ss. (Sometimes seconds get frozen but it's nothing to worry about)
      4. Misc NativeSD Manager fixes.
    • HD2_Extended_TWRP_2.4.0.0_r5 @ 2013.01.30
      1. Added ability to select theme.
        You must place the theme file(ui.zip) in a folder under /sdcard/TWRP/theme (eg /sdcard/TWRP/theme/Holo_Dark/ui.zip)
      2. Added ability to select and load a recovery package like Aroma-File-Manager or NativeSD-Recovery.
        You must place the files (*.zip) under /sdcard/TWRP/app.
      3. Fixed NativeSD backup(tar arguments error).
      4. Moved Update_Size() from Mount() function to Wipe().
    • HD2_Extended_TWRP_2.4.0.0_r4 @ 2013.01.29
      1. Fixed a mounting issue:
        Update_Size() function was called inside Mount().
        However inside Update_Size() there was a call for Mount() and UnMount(!?) causing a mess.
        Lets see if this could fix the problem with DataOnExt too.
    • HD2_Extended_TWRP_2.4.0.0_r3 @ 2013.01.29
      1. Ported mainline commits till 29th of Jan.
      2. Fixed boot partition's flag so that it can be wiped
      3. Settings file (.twrps) is now read once at boot.
      4. The TWRP folder structure on /sdcard will be auto-generated.
    • HD2_Extended_TWRP_2.4.0.0_r2 @ 2013.01.27
      1. Updated to twrp2.4.
      2. Ported all mainline commits till 26th of Jan.
      3. Rewrote most of the extended functions.
      4. Added option to format all main partitions except for /sdcard.
      5. Added new feature in file manager: the size of the selected file or folder will be shown in the operation page.

      • HD2_Extended_TWRP_2.3.3.0_rev12 @ 2013.01.16
        1. One&only purpose: Attempt to fix all issues for MAGLDR users.
        2. Extensive logging is present in this rev.
      • HD2_Extended_TWRP_2.3.3.0_rev11 @ 2013.01.15
        1. Second attempt to fix weird sdcard issues.
        2. Added more logging output to help find the problem.
      • HD2_Extended_TWRP_2.3.3.0_rev10 @ 2013.01.14
        1. Probably fixed the error during "Fix-Permissions" when DataOnExt is used.
        2. Reverted changes in fstab as an attempt to fix weird sdcard issues.
      • HD2_Extended_TWRP_2.3.3.0_rev9 @ 2013.01.13
        1. Another attempt to fix partitions' sizes for the backup process.
        2. Added option (under "Backup" page) for the user to select if the NativeSD roms will be excluded or not from the sd-ext backup.
        3. Added ability to run shell scripts that you might have on your sdcard (/sdcard/TWRP/scripts).
        4. Added back the missing "Reload Theme" button under "Advanced" page.
      • HD2_Extended_TWRP_2.3.3.0_rev8 @ 2013.01.06
        1. Changed the path where TWRP will save any taken screenshot to "/sdcard/TWRP/screenshots/".
          The name of the png file will have this format "TWRPScr-001.png". The increment will be done automatically.
          Unfortunately I haven't fixed the quality yet.
        2. Added an option under "Settings" to "Enable path-checking for DataOnExt".
          If enabled the path that will be used for the DataOnExt mode will be checked before any errors occur. Hopefully this will help non-experienced users to use DataOnExt function.
        3. Added ability to automatically skip any NativeSD Rom folder from your sd-ext backup.
          If you want to backup a NativeSD Rom do it from the NativeSD Manager.
        4. Probably fixed the way TWRP calculates the partition sizes according to our extended settings(skip dalvik-cache - dataonext - skip nativesd roms).
          So now the sizes (shown under "Backup" and) used during backup-process should be correct.
      • HD2_Extended_TWRP_2.3.3.0_rev7 @ 2013.01.04
        1. Removed the second parsing of recovery.fstab (the one after "postrecoveryboot.sh" run). Instead the script "prerecoveryboot.sh" will run before TWRP parses the recovery.fstab file.
          This should also eliminate any weird errors you've been seeing in the logs.
        2. Attempt to resolve problems relevant to "Fix Permissions" when DataOnExt mode is ON.
        3. Added a second step/check in UnMount() in case it fails the first time. Just like I did for the Mount() in previous rev.
        4. Added option to skip saving "dalvik-cache" during backup (under "Backup" menu) in order to minimize the size of the backup file. After-all dalvik-cache is recreated. It will be like you've wiped it when you restore that backup.
        5. Changed the way Backup & Restore work for DataOnExt:
          • If you have DataOnExt checked and you go ahead and start a backup process then
            a (hidden) file called .dataonext will be created in the backup folder.
            The path for your /data mount point will be stored inside that file.
            Do not delete that file cause you'll have to recreate it manually!
          • Regardless of the settings you might have(DataOnExt checked or unchecked) if you go ahead and start a restore process of a backup with DataOnExt
            (so it has the .dataonext file inside - if not it's easy to manually create it)
            the option for "Setup recovery for DataOnExt" will be checked and
            the path (DataOnExt button) will be reset to the path you had when the backup was done.
          • If you were using the entire /sd-ext for /data (original DataOnExt) when you made your backup then
            when you restore that backup, the sd-ext will be formatted.
            If you were using a subdir of /sd-ext for /data (modified DataOnExt like "/sdext/NexusHD2-JellyBean/data") when you made your backup then
            when you restore that backup, the sd-ext will not be formatted - instead only that subdir will be deleted.
        6. Ported Tasssadar's "clicked" effect to all buttons as feedback.
        7. Been experimenting and added some code to be able to take a screenshot (will be saved as /sdcard/TWRPScr.png).
          It is done by touching the top LOGO. To enable it, there is a relevant checkbox under "Settings".
          It doesn't work as expected yet! The pics taken are crap:( but it's a wip...
      • HD2_Extended_TWRP_2.3.3.0_rev6 @ 2013.01.02
        1. Fixed a problem when restoring an sd-ext backup that was made with CWM Recovery.
        2. Added an option to run some filesystem checks on the sd-card under "Partition SD Card" button inside "Advanced".
        3. Enabled power key to lock the screen.
      • HD2_Extended_TWRP_2.3.3.0_rev5 @ 2012.12.30
        1. 1st attempt to fix mounting problem(s) related to ext partition.
        2. TWRP is now able to restore backups that were made using a CWM Recovery.
          All you have to do is copy the entire backup folder (i.e. 2012-08-20.09.12.38) from /sdcard/clockworkmod/backup to /sdcard/TWRP/BACKUPS/htcleo
      • HD2_Extended_TWRP_2.3.3.0_rev4 @ 2012.12.28
        1. 1st attempt to fix TWRP's failure on file-system check when a partition has a label.
        2. Changed how TWRP handles the ext partition(s) size while parsing recovery.fstab.
      • HD2_Extended_TWRP_2.3.3.0_rev3 @ 2012.12.27
        1. 3rd attempt to fix the .android_secure bug.
        2. Added an SD version for testing.
      • HD2_Extended_TWRP_2.3.3.0_rev2 @ 2012.12.26
        1. 2nd attempt to fix the .android_secure bug.
        2. 1st attempt to fix the crash of sd card's partitioning when adding 2nd ext partition.
        3. Reverted the logo to the default one.
        4. New settings for fs-check and DataOnExt will be saved and not lost after a reset.
        5. Switched the type of release from just an img-file to a flashable-zip with a script to check recovery's partition size before updating.
      • HD2_Extended_TWRP_2.3.3.0_rev1 @ 2012.12.24
        • Ported commits from mainline 2.3.3.0.
        • Changed how the DataOnExt will be handled.
          Under "Settings" you'll find a checkbox with which you can "tell" recovery that you're using DataOnExt or not.
          In case you're using a modified DataOnExt method you can set the actual path of your /data (i.e. /sd-ext/%RomName%/data) by hitting DataOnExt button.
        • Probably fixed the .android-secure bug.
        • Reverted the backup path(BACKUPS/htcleo/).
          So you have to create an intermediate folder named "htcleo" under BACKUPS and move your backups inside.
        • Reverted the max size for splitting archive to 1.5GB.
        • 1st attempt for saving the contents of your ext partition when you change the fs type (will need enough free space on your sdcard for this to work).
        • Added option to set the number of mounts that will trigger a filesystem check under "Settings".
        • Added option to wipe Data, Boot and (cLK)sBoot under "wipe" Menu.
        • Added necessary code for selecting fs type (vfat / ntfs) for /sdcard but since I can't make it function properly I've disabled it in the UI. (Also in case it will work using the ntfsprogs binaries, the size of the recovery will increase to ~ 8MB)
      • HD2_TWRP_2.3.2.X @ 2012.12.14
        • Detection of bootloader
        • Nilfs2 support for sdcard's ext partition
        • Option for converting file system(formatting) of sdcard's ext partition: [ext2 - ext3 - ext4 - nilfs2]
        • In-built NativeSD manager
        • Option for adding a 2nd ext partition(mmcblk0p3)
        • (cLK)Direct rebooting to selected boot partition
        • Option to adjust the backup process for DataOnExt case
        • 1st attempt for archive splitting(also lowered the max size to 512MB)
        • 1st attempt for MAGLDR boot restoring
    View
    26
    kokotas
    kokotas
    Info

    • How to report a problem
    1. Provide the log file.
      In order to get it connect your device to pc via usb and run in terminal:
      Code: 
      adb pull /tmp/recovery.log
      If that fails for some strange reason then you could also try:
      Code: 
      adb pull /cache/recovery/log
      Or you could just use the "Copy Log" button under "Advanced" and have the log copied to the root of your card.
    2. Give a short description of what triggered the problem.
    3. If you don't have your device's setup in your signature, post that info too. For example:
      Code: 
      HD2 ver.: EU
SDCard: Sandisk 32GB(c4)
SDCard's Partition Table: mmcblk0p1 [vfat,30GB], mmcblk0p2 [ext4,2GB]
Bootloader: cLK 1.5.1.6
NAND's Partition Table: recovery 8MB, misc 2MB, boot 4MB. userdata auto-size, system 200 MB, cache 2MB
Rom: HyperDroid 6.1 - NAND
    4. Since this is a WIP, you could also use github to report any issue.

    • Theme related
    1. Information on Official TWRP Theming.
    2. Extended TWRP gives you the ability to choose between many themes.
      When booting, it checks for a theme zip file on your card:
      /sdcard/TWRP/theme is the location where you must create a folder named after the theme you will use and place the ui.zip inside it (i.e. /sdcard/TWRP/theme/Holo_Dark/ui.zip).
      If none found then it will use the built-in theme.
    3. For those who prefer the blue-ish TWRP default theme, I will be attaching it to this post every time something changes, so that you can use it as any external theme.
    4. Since version 2.6.0.0, the theming engine of the Extended TWRP differs from the official.
      Instead of one ui.xml file, the new theme requires two files portrait.xml and landscape.xml with the appropriate images.
    View
    22
    Dark_Avenger
    Dark_Avenger
    Holo Dark theme for version 2.6.3.4 (portrait only).
    View
    17
    kokotas
    kokotas
    Hi guys,

    The bug regarding cLK's extra boot partitions was there because I forgot to change a line:
    Code: 
    #define MSM_MAX_PARTITIONS 8
    at nand_partitions.c in tytung's kernel before compiling.
    Also, after thinking about the screenshot issue, I decided to follow this way: If the system is busy, even if you accidentally press the top logo no screenshot will be taken so the running process will not be interrupted and will finish normally.
    Finally, in the previous version I ported the new gui element partitionlist from mainline. That was a bit messy cause it changed a lot of things regarding backup/restore/wipe, so I had to rewrite some of the functions.

    Regards!
    PS:I uploaded a new compiled file at 1st post. Happy testing:D
    View

New posts

Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone