[Dev] New "NavRadio+" ported to MTC devices

[GnFgr]

Ok i did some tests:
1. no FCC installed. Only set the hal9k modsetting app like this:
View attachment 5787149
NavRadio start everytime after sleep but not after boot. (Even if i set it to start in NavRadio and in Hal mod).
Of course NavRadio must be running before going into sleep mode.

2. I installed FCC from playstore and NavRadio stopped starting after sleep.
I had to set FCC autostart options like this:
View attachment 5787153
It started again after sleep but still not after boot.
Then if I play a bit with the play/pause button in FCC it start messing around with audio focus gain/loose causing Navradio to play/mute a couple of times... not a nice behavioue at all.
This si becaus eof the way FCC handle the players and becaus eNavradio right now is not a real music player.
Honestly i won't spend much time on this right now because everything will change again when i'll add the media browser service to make NavRadio work as a player.
When that will be ready i'll have to work with speedfire to make NavRadio working correctly again.
So for now please just be patience some more...

No problem at all with waiting.
Not at all.

After all my radio is working if i just press next or previous so not that a big deal.

Anyway thanks for just trying and replying, you know that shows a lot for a dev.

Keep on man and thanks.

 

[KoTiX2]

Sure, thanks

I found that a crash when going to background is caused by the notification popup.
Please try to disable the notification toast in NavRadio settings/notification (the very first top setting in that section) and tell me if it fix it for you.

 

[tebukan]

I found that a crash when going to background is caused by the notification popup.
Please try to disable the notification toast in NavRadio settings/notification (the very first top setting in that section) and tell me if it fix it for you.

I will try what you said tomorrow. I work at the hospital today. I'll give the necessary information tomorrow. Thank you for your attention

 

[tebukan]

I found that a crash when going to background is caused by the notification popup.
Please try to disable the notification toast in NavRadio settings/notification (the very first top setting in that section) and tell me if it fix it for you.

Hi, I tried the way you said today. I turned off the first setting in the notifications section of the program settings. The problem of kicking from the program and continuing in the background is gone. It worked very stable. God bless your hands.

 

[KoTiX2]

Hi, I tried the way you said today. I turned off the first setting in the notifications section of the program settings. The problem of kicking from the program and continuing in the background is gone. It worked very stable. God bless your hands.

Good, at least now I know where to look at.
I hope to find a solution, otherwise I'll remove those notifications for Android 7

 

[tebukan]

Good, at least now I know where to look at.
I hope to find a solution, otherwise I'll remove those notifications for Android 7

Yes, turning off the above setting fixed the problems. I turned it off in the setting below. But this time, radio information did not appear in agama launcher. It went out when I opened it again. Keep those settings

 

[KoTiX2]

Yes, turning off the above setting fixed the problems. I turned it off in the setting below. But this time, radio information did not appear in agama launcher. It went out when I opened it again. Keep those settings

I will remove only the top one.
The boots one are for metadatas for agama and other launchers.
I will not remove the metadata, just the popup notification.

 

[Palme1987]

I love this beautiful radio application, and i use it on my Xtrons PQ90MTVL with Hal9k Mod 5.2

 

[KoTiX2]

New NavRadio+ version 2.73 on PlayStore:

- Fixed crash caused by bad urls of Logo packages
- Fixed crash on android 7 caused by popup notifications
- Fixed AF,TA, REG settings wrongly reset on startup on TS10

 

[tebukan]

New NavRadio+ version 2.73 on PlayStore:

- Fixed crash caused by bad urls of Logo packages
- Fixed crash on android 7 caused by popup notifications
- Fixed AF,TA, REG settings wrongly reset on startup on TS10

Hello. I tried the new version. Issues resolved for Android 7. When adding only Manual logo, some of the logos are not visible. I was able to transfer the logo file to the gps cd card of the device and open it that way. All of the logos have appeared. But even though I select and save, the logo is not active. There is such a small problem. Other than that it works fine and hassle free. Thank you

 

[YPR111]

hi
When installing a free app, the steering wheel button works fine
But when you install the paid app, the steering wheel buttons stop working
My car is vw jetta 2015
Knowing the latest program ts10 1.2 20221114

 

[KoTiX2]

hi
When installing a free app, the steering wheel button works fine
But when you install the paid app, the steering wheel buttons stop working
My car is vw jetta 2015
Knowing the latest program ts10 1.2 20221114

If your unit don't have canbus, you have to set the steering wheels keys in NavRadio settings/keys.
Tipically the numbers are 19 and 21 for next/Prev buttons.
In the full version i had to remove them because cause issues with canbus units.

 

[vorol]

RDS not working
after update

 

[KoTiX2]

RDS not working
after update

What kind of unit do you have?
What of rds don't work? Please be more specific or post a video.

 

[KoTiX2]

Hello. I tried the new version. Issues resolved for Android 7. When adding only Manual logo, some of the logos are not visible. I was able to transfer the logo file to the gps cd card of the device and open it that way. All of the logos have appeared. But even though I select and save, the logo is not active. There is such a small problem. Other than that it works fine and hassle free. Thank you

Your logos must be in png format, 255*255pixel max
Put them in RadioLogos folder in internal sdcard

 

[KoTiX2]

Another small quick update is coming soon v2.74:
- Fixed Logos links for Dutch language
- Added Mexico Logos to USA region

 

[YPR111]

In the full version, the steering wheel control keys no longer work, knowing that there is no difference between removing the CANbus or removing the CANbus. With a new update, the numbers 19-21 appear with me, what is the solution
Knowing that the free version the buttons work well

 

[marchnz]

In the full version, the steering wheel control keys no longer work, knowing that there is no difference between removing the CANbus or removing the CANbus. With a new update, the numbers 19-21 appear with me, what is the solution
Knowing that the free version the buttons work well

View attachment 5795029View attachment 5795031View attachment 5795035View attachment 5795033

Not MTCD type head unit

 

[timido64]

Good morning,

@kotix, kindly asking for help for a user on "Androidiani", the request is as follows:

Hello and congratulations for this app that I have never been able to do without on my old PX5, now I have another stereo with the following info:

6x ARM Cortex A55 @ 1.8Ghz
2x ARM Cortex A75 @ 1.8Ghz

Android version: 12
MCU:MS064-mtk_C55

Once the app has started it tells me that it is not compatible with my system instead from playstore it said yes, can I do something or will there be a future version that will become compatible?

Thanks in advance

Thanks dear.

 

[KoTiX2]

Good morning,

@kotix, kindly asking for help for a user on "Androidiani", the request is as follows:

Thanks dear.

The PlayStore cannot detect the MCU type of these Chinese units, so why it could say that it's compatible.
Only the app can determine if it's compatible or not.
If it says that it's not, means it doesn't work and there is nothing he can do about it.
Generally speaking, NavRadio doesn't work on any MTK based unit right now. I don't know if I'll make it work in the future...