Software Development [Dev] New "NavRadio+" ported to UIS7862 and sc9853i FYT devices.

Search This thread
By:
Advanced…
K

KoTiX2

Senior Member
Jul 10, 2010
2,950
1,968
Realme GT
Agnes04rk said:
14. března 2023
Pro své android rádio Teyes CC3 jsem hledal aplikaci pro přehrávání pozemního vysílání. Nejdříve jsem zkusil bezplatnou verzi a poté zakoupil tuto. Musím uznat, že je perfektní se spoustou nastavení pro přizpůsobení každému uživateli. Jsem na začátku testování, tak uvidím, jak to bude dál. Lokalizace v CZ, snadný import ikon pro jednotlivé stanice. Uvidím jak bude fungovat automatické přepínání mezi alternativními frekvencemi, které jsem si teď nastavil. Smekám před vývojářem aplikace.

KoTiX
14. března 2023
Automatic AF switching will never work on Teyes units. It's badly implemented in the MCU.

Any solution for this?
Thanks
Click to expand...
Click to collapse
There are no solutions. All FYT units are made with AF not working.
The only thing you can do is add manually the alternative frequencies in NavRadio+ and switch them double clicking on the station button or sliding up/down in the middle of the screen.
 
A

ABRAMSM77

Member
Mar 17, 2023
7
0
Cześć. Zrobiłem wszystko zgodnie z instrukcją i oto komunikat

Mod Edit: English Translation Below

Hi. I did everything according to the instructions and here is the message
 

Attachments

  • android_system_recovery_no_command-4.jpeg
    android_system_recovery_no_command-4.jpeg
    4.9 KB · Views: 14
Last edited by a moderator:
K

KoTiX2

Senior Member
Jul 10, 2010
2,950
1,968
Realme GT
Ok. You have a FYT device, not a TS10.
Please post a picture of the content of USB disk.
Possibly make a video of the procedure you are doing.
 
A

ABRAMSM77

Member
Mar 17, 2023
7
0
KoTiX2 said:
OK. Masz urządzenie FYT, a nie TS10.
Zamieść zdjęcie zawartości dysku USB.
Ewentualnie nagraj film z zabiegu, który wydasz.
Click to expand...
Click to collapse
Dziękuję za informację. W razie potrzeby jutro prześlę film, ale sformatuję go ponownie i rozpakuję plik
 

Attachments

  • IMG_20230317_161810.jpg
    IMG_20230317_161810.jpg
    3.6 MB · Views: 35
Last edited:
M

marjanoos

Senior Member
Mar 27, 2012
216
97
Dortmund
ABRAMSM77 said:
Dziękuję za informację. W razie potrzeby jutro prześlę film, ale sformatuję go ponownie i rozpakuję plik
Click to expand...
Click to collapse
To jest forum, na którym należy pisać po angielsku. Jak nie znasz języka, to przetłumacz wiadomość używając Google Translate zanim ją tutaj wyślesz. Szanuj czas ludzi, którzy chcą Ci pomóc.


eng: Please write here in english. If you don’t know the language, use Google Translate and paste translated message here. Respect the people who want to help you and their precious time.
 
  • Like
Reactions: Pfeffernuss
A

ABRAMSM77

Member
Mar 17, 2023
7
0
marjanoos said:
To jest forum, na którym należy pisać po angielsku. Jak nie znasz języka, to przetłumacz wiadomość używając Google Translate zanim ją tutaj wyślesz. Szanuj czas ludzi, którzy chcą Ci pomóc.


eng: Please write here in english. If you don’t know the language, use Google Translate and paste translated message here. Respect the people who want to help you and their precious time.
Click to expand...
Click to collapse
Sorry for the trouble, but that's what I do and inserts in Polish
 
K

KoTiX2

Senior Member
Jul 10, 2010
2,950
1,968
Realme GT
Version 2.82 is coming out on PlayStore
(On Huawei Appgallery it will take some more days to come out):

- Added Carousel View with up to 11 visible stations
- Band button bring to front NavRadio if it was on background
- Improved advertisement to use the right filemanager for Logos browsing
- Fixed small bug when deleting station
- Added SWC Key codes for buttons 6-7-8-9-0-#-* for TS10

carousel.png
 
Last edited:
  • Like
Reactions: j-5, hanichl, MasterOfLight and 4 others
surfer63

surfer63

Senior Member
May 4, 2010
6,589
3,958
Zwolle
github.com
KoTiX2 said:
No, AF don't work at all.
Yes, in NavRadio you can edit each station and add up to 9 alternative frequencies.
Then you can switch manually between them sliding up/down in the middle of the screen or DoubleClicking on the station button
Click to expand...
Click to collapse
I know that AF is a non-working mess on the FYTs.

"Then you can switch manually between them sliding up/down in the middle of the screen or DoubleClicking on the station button"
Is this really only manual? Does the app not scan itself for one of the frequencies if the station strength is reduced below the threshhold in the Settings?

Say we have a station "MyFavoriteStation" with the following frequencies: {9650 ,10390, 9980, 8860} (up to 10).
If users have that station selected and we are "driving away" from the strong frequency (mostly our primary as that is where we live) and drops below the set threshold in the settings, isn't it then possible to loop through the frequencies, read the strength of the station, and after the loop switch to the strongest frequency? And while scanning show a popup (toast) "please be patient, trying alternate frequencies".

And vice versa: If I am in another town and open the radio app, and then select "MyFavoriteStation", it will most possibly not be on the "first frequency". Can it then also loop through the frequencies, record the strongest station, and after the loop switch to that frequency?
 
Last edited:
  • Like
Reactions: DexterMorganNL
T

tarekeur

New member
Jan 23, 2007
4
0
Good morning. I took the paid version on my Mekede M200S car radio. but I ask if the road traffic works on the application. and I have a small problem that I can't access the NavRadio application from the steering wheel control despite having deleted the original radio application. if not the NavRadio application is great. I forgot to mention that I can control the sound volume from the steering wheel control. increase, decrease and mute
 
Last edited:
K

KoTiX2

Senior Member
Jul 10, 2010
2,950
1,968
Realme GT
tarekeur said:
Good morning. I took the paid version on my Mekede M200S car radio. but I ask if the road traffic works on the application. and I have a small problem that I can't access the NavRadio application from the steering wheel control despite having deleted the original radio application. if not the NavRadio application is great. I forgot to mention that I can control the sound volume from the steering wheel control. increase, decrease and mute
Click to expand...
Click to collapse
What do you mean by "the road traffic work with the app"?
Does your unit use canbus for steering wheel controls?

There is a section to assign the steering wheel keys in NavRadio settings: enable the "show key number" and it will tell you which number to assign to each function.

If it use canbus i guess you should set to zero those values.
 
T

tarekeur

New member
Jan 23, 2007
4
0
KoTiX2 said:
What do you mean by "the road traffic work with the app"?
Does your unit use canbus for steering wheel controls?

There is a section to assign the steering wheel keys in NavRadio settings: enable the "show key number" and it will tell you which number to assign to each function.

If it use canbus i guess you should set to zero those values.
Click to expand...
Click to collapse
voice alerts for traffic bulletin on the highway or tunnel with RDS. AND for the steering wheel control I check and I will let you know. I forgot to specify the car radio is equipped with can bus
THANKS
 
K

KoTiX2

Senior Member
Jul 10, 2010
2,950
1,968
Realme GT
tarekeur said:
voice alerts for traffic bulletin on the highway or tunnel with RDS. AND for the steering wheel control I check and I will let you know. I forgot to specify the car radio is equipped with can bus
THANKS
Click to expand...
Click to collapse
The RDS function for traffic informations is the TA. It normally start a search of a station that send those kind of informations.
Because on Chinese units these things are controlled by MCU and radio chip, the reliability is unknown...
 
surfer63

surfer63

Senior Member
May 4, 2010
6,589
3,958
Zwolle
github.com
surfer63 said:
I know that AF is a non-working mess on the FYTs.

"Then you can switch manually between them sliding up/down in the middle of the screen or DoubleClicking on the station button"
Is this really only manual? Does the app not scan itself for one of the frequencies if the station strength is reduced below the threshhold in the Settings?

Say we have a station "MyFavoriteStation" with the following frequencies: {9650 ,10390, 9980, 8860} (up to 10).
If users have that station selected and we are "driving away" from the strong frequency (mostly our primary as that is where we live) and drops below the set threshold in the settings, isn't it then possible to loop through the frequencies, read the strength of the station, and after the loop switch to the strongest frequency? And while scanning show a popup (toast) "please be patient, trying alternate frequencies".

And vice versa: If I am in another town and open the radio app, and then select "MyFavoriteStation", it will most possibly not be on the "first frequency". Can it then also loop through the frequencies, record the strongest station, and after the loop switch to that frequency?
Click to expand...
Click to collapse
Please don't get me wrong. The double-tap on the Station name works fine as well to switch to registered alternate frequencies you have stored under that Station name, but it requres a number of manual actions and an automatic search ("automatic double-tap") would prevent this.
 
K

KoTiX2

Senior Member
Jul 10, 2010
2,950
1,968
Realme GT
surfer63 said:
Please don't get me wrong. The double-tap on the Station name works fine as well to switch to registered alternate frequencies you have stored under that Station name, but it requres a number of manual actions and an automatic search ("automatic double-tap") would prevent this.
Click to expand...
Click to collapse
Hi surfer, sorry if I missed to reply you...
I can't read the station signal strength in real time. I know it's there a signal strength reading during search but the app cannot read it if i remember right.
Surely i can't read it before it start searching. So i never know when the signal goes bad.
I'll look more into the code of original app but I'm not so confident to find anything usefull
 
  • Like
Reactions: surfer63
You must log in or register to reply here.

Similar threads

surfer63
General General FYT based Spreadtrum uis7862(s) (unisoc ums512) & uis8581a (sc9863) - Q&A, Mods, tips, firmware
Replies
4K
Views
415K
surfer63
surfer63
surfer63
General Modding your Joying/FYT SC9853i unit without root
Replies
816
Views
131K
O
ODIN679
T
General New Joying Android 10 UIS7862 Octacore 1.8GHz (4GB RAM, 64GB flash)
Replies
942
Views
231K
Wadsofat
Wadsofat
realzoulou
General Joying Android 8.1 Intel Airmont eight-core 1.8GHz SC9853i (4GB RAM, 32GB flash)
Replies
2K
Views
326K
B
bambapin
mariodantas
Software Development [KERNEL] FYT 7862 and 8581 kernel MD-EDITION with FMC
Replies
1K
Views
112K
aikair66
aikair66

Top Liked Posts

24 Hours 30 Days All time
  • There are no posts matching your filters.
  • 7
    K
    KoTiX2
    Madamare1 said:
    principiálne prosím, východná Európa nie je Rusko. Nechcem byť spájaný ani v aplikácii. Prepáč :)
    Click to expand...
    Click to collapse
    First: it's mandatory to write in English on this forum!

    Second: It doesn't mean that Russia is part of eastern Europe.
    It just mean that you will see a list of countries of eastern Europe and Russia.
    I don't care about any politics, ethics or whatever else stuff.
    They are just world areas and regions for me that's all.
    View
    5
    K
    KoTiX2
    Dipa79 said:
    Yes probably different unit but same result for my problem - still not able to sestup FM1/FM2 (FAV1/FAV2)
    Click to expand...
    Click to collapse
    Next release will have FM, FM2, FM3
    There will be probably an option in the settings to enable FM2 and FM3 just like for AM
    View
    2
    D
    Dipa79
    KoTiX2 said:
    Next release will have FM, FM2, FM3
    There will be probably an option in the settings to enable FM2 and FM3 just like for AM
    Click to expand...
    Click to collapse
    @KoTiX2 really appreciate quick respond and solving, thanks a lot
    View
    2
    K
    KoTiX2
    Dipa79 said:
    Hi All,

    I was trying search in this thread and also outside but without any success so maybe you can help ne and apologies if it was already discussed here. I am just wondering if it is possible to have more bands like FM1 and FM2? Different radios station in different location so would be great to just swap FM1 for one location and FM 2 for other. Or do I miss something from app functionality?

    edit: or how to create FAV List 1 and FAV List 2 and so on?

    Thanks a lot for any advice

    Pavel
    Click to expand...
    Click to collapse
    Right now I'm very busy porting the app to another model but when I'll have time I'll try to add FM1, FM2 etc...
    View
    2
    surfer63
    surfer63
    Dipa79 said:
    Do not really understand your replay.yes I have purchased paid version as free version worked fine on my units and yes I also checked type of head units. As dar as I understood the difference between free and paid version is to have logo station and some other fine tunes. There is no conment about FM1/ FM2 or FAV1/2 option so really do not understand what I should really check in first post.
    Or maybe I miss something so please …
    Click to expand...
    Click to collapse
    Paid or not paid has nothing to do with it.
    Referring to post 1 is because it is very clear from your screenshot that you do not have a FYT. But that reference is not completely correct as you already mentioned that it does work on your non-FYT units.
    But the fact that your unit is not a FYT unit, makes me wonder why you ask in the FYT forum and not in the sub-forum where NavRadio is discussed for your brand/reseller of unit.

    And w.r.t to different radio stations in different locations: Do you mean the same radio station in another location? -> Use RDS.
    Otherwise: Export your preferences for one region and when you go to another region with those other radio stations: create them and export those as well.
    And import the set that you need at that moment in that region.
    View
  • 27
    K
    KoTiX2
    SOME TIPS AND GUIDES

    RADIO PROXY ​
    I slightly modify the surce code of MusicProxy (from Koenig) to create a RadioProxy app that replace the original radio app with a shortcut to NavRadio+ so you won't need to remove the original app with my "remover/Installer" tool.
    If you have already removed the original radio app, please use again my tool to restore it.
    Starting from version 1.2 RadioProxy does much more then being a simple short cut. It's becoming a real companion of navRadio+.
    With version 1.2 RadioProxy now can read the RDS ID of the sinthonized station and broadcast some infos to Navradio+ that will help it with:
    - automatic logo assignement based on the stations id and not only by their names
    - automatic switch of stored Alternative Frequencies
    - automatic seeking of Altenative Frequencies based on id search

    RadioproxyFYT_1.3.apk

    It will run the full or basic version of NavRadio depending of which one you have installed.
    If you have both it will run by default the full version of NavRadio+.
    If you need to run a different app or force the basic version you need to add the config file with specified in it the "PackageName" of the app to run:
    PackageName=com.navimods.radio_free

    The config file must be named RadioProxy.cfg
    and copied in a folder like this:
    /sdcard/RadioProxy/RadioProxy.cfg

    ​

    To REMOVE RadioProxy follow these steps:
    Settings - Device - Applications - RadioProxy - Three dots in the upper right corner - Delete updates

    (Thx to koenig for providing the source code of MusicProxy).

    Previous version: RadioProxyFYT_1.1.apk
    RadioproxyFYT_1.2.apk
    ----------------------------------------

    - REMOVE ORIGINAL RADIO APP (OBSOLETE USE RADIOPROXY INSTEAD)-​
    There are some issues due to original radio app coexistance. To avoid these issues the best option is to remove the original radio app from the system using the FYT_Radio_REMOVER/RESTORER tool availabe here:


    Extract the zip file on the root of a FAT32 USB disk so you have:
    a folder "BACKUP_RADIO_APK"
    a folder "lsec_updatesh"
    a file "lsec6315update"
    a file "lsec6316update"
    a file "lsec6521update"

    With unit powered up and android running, insert the USB and when prompted press "START".
    This will reboot the unit and run some shell commands to rename the original radio app from "******_com.syu.radio.apk" into "*******_com.syu.radio.bak" so it will not be found by android.
    You will see some linux commands scrolling and at the end you'll see a green text "update success!Pls remove device". Do it and the unit will reboot to android with radio disabled.
    The script will also make copy of the original radio app on the USB in the folder "BACKUP_RADIO_APK" in case you need it in the future.

    TO RESTORE THE ORIGINAL APP​
    Simply insert again the USB with same files in it and let the process run again.

    Essentially everytime the USB stick is inserted, it remove the original app renaming it with .bak extension or if the .bak file exist it restore it back with .apk extension.
    You can use it as many times you want.



    -----------------------------------------------------------------------​

    TOGGLE SCREEN NORMAL/FULL:
    - Double Click on the station information toggle fullscreen on/off.

    NORMAL SCREEN:
    - Long press on the station information popup the "ADD Station" dialog window if the station is not in your station list. If it's already in your list, it will focus the relative station button.
    - Long press on a station button bring up the "EDIT Station" dialog window
    - Single press on screen arrows <> does a small frequency step fwd/back
    - Long Press on screen arrows does a quick search fwd/back

    FULLSCREEN MODE:
    - A Single press of the arrows <> switch to next/previous station
    -A Long press on station information(center of the screen) bring up the "EDIT Station" dialog window.
    - In interface settings you can remove the big frequency in background if a logo is available.
    - In settings you can hide status bar, activate the clock and a speed gauge

    STEERING WHEELS CONTROLS:
    - The steering wheels commands act exactly in the same way as the fullscreen arrows, they just need to be setup in the correct way in carsettings application.

    FAVORITE LIST:
    - The FAV list is the result of merging FM and AM favorites, so you can have both frequencies in the same list.
    - FAV stations can be edited within the fav list but cannot be added. You need to be on fm or am list to add a station and set it to favs.
    - Deleting the FAV list will just remove the fav flag from the fm/am stations but will not delete them.
    - Deleting AM/FM list it will delete the FAV list too.

    LOGOS:
    - you can use your own station logos, you just need to know where you have them stored and browse for them when editing a station.
    - To get the stations Logos from the app you have to set the nationality of the logos in the interface menu, download and extract them.
    Once they are extracted you have to edit each saved station to assign the logo image to it.
    - The automatic assignment of the Logos is based on the RDS id of the radio stations (pi code) and the search of the logo by RDS name.
    The first method (by id) is faster and more precise but it needs that the name of the logo contain the picode of the station and for this purpose i renamed them for some of the available countries. Of course i cannot make them all and the functionality of this method depend of the availability of correctly named logo images for your country.
    The second method (by name) is less accurate and it work comparing the RDS name with all available logos. If the rsult of the comparison is 100% correct the logo is autoamatically assigned. If the result are more then one logo, a dialog window popup asking you to choose it.
    For USA and Canada the assignment of the logo is is done by searching the frequency of the station in the logo file name.

    AF (Alternative Frequencies) handling: (Doubleclick to switch between stored AF)
    AF service allows the radio tuner to tune in to an alternative frequency when the signal becomes too weak. The minimum level signal can be set in factory settings (Auto Search Stop) and has been found
    that around 30 db is the best choice.
    To improve even more this service I added an automatic storing of the alternative frequencies so that every time a new frequency is received, it's added in a list.
    After an autoscan some radio stations can be found on different frequencies, NavRadio+ have an option (in Settings/radio) to automatically merge the frequencies in just one button populating the AF list
    The frequencies available in this list can be selected using the station editor or switched one by one DOUBLECLICKING on the station button.

    NOTES:
    I'm the only developer of the app and I work on it every single day for some hours a day.
    I try my best to develope the app at best of my possibilities and I wish at evey release that it is bug and crash free.
    This is very hard to achieve, even if I have some very good friends that help me testing it.
    I'm really thankful to them for their help and support.

    Thank everybody who beleive in my work and thanks for understanding. :)


    EDIT: Updated FYTRadio remover/restorer with new lsec6315update file
    View
    21
    K
    KoTiX2
    Hi all,
    I finally ported my NavRadio+ app to FYT based devices with CPU UIS7862, sc9853i and sc9863a!!

    It surely don't work on Sofia and older FYT devices.
    I own an Isudar V72 unit with CPU UIS7862 with MCU NOR FYT=1 but it's been confirmed to work on other FYT types too (31, 51 etc..)

    A FREE VERSION FOR XDA USERS IS AVAILABLE TO ACCOMPLISH THE XDA RULES AND TO LET USERS TEST THE COMPATIBILITY BEFORE BUYING IT.
    GET IT HERE:
    V3.19 DROPBOX LINK
    or
    V3.19 GDRIVE LINK
    IT DIFFER FROM PAYED VERSION JUST IN TERMS OF USER CUSTOMIZATIONS OPTIONS AND NO LOGOS SUPPORT.

    If you are sure that your unit is compatible with the app you can get it on the Google PlayStore, here:
    https://play.google.com/store/apps/details?id=com.navimods.radio
    or on the Huawei Appgallery at this link:
    https://appgallery.huawei.com/app/C107643913

    Here you can see a sample video of my working progresses:
    Sample Video
    Here a demonstration video of the automatic assignment of Logos, station name and alternative frequencies:
    Demo

    It's widely customizable in the graphics and layouts:
    - Wallpapers: Presets (about 30), system wallpaper, solid color, from personal images
    - Color themes (20 predefined or personal adjustments)
    - Night mode on / off, timed or automatic with car lights (MTC only)
    - Resizable text elements and Font choice
    - 3 view modes:
    Vertical List (Left/Right and5,6 or 6 buttons)
    Horizontal Grid (1x5, 2x3, 2x4, 2x5, 3x3, 3x4, 3x5)
    Fullscreen (double tap or timed)
    - Selectable inactivity timer for fullscreen activation
    - Toggable StatusBar in fullscreen mode
    - Toggable Clock and GPS speed in fullscreen
    - Toggable Frequency slider
    - Automatic and manual assignement of Logo images to the stored radio stations based on RDS id and station name scraping.
    - Logos can be downloaded from internet DIRECTLY IN THE APP or sideloaded.
    - Station lists can be sorted by name or frequency and saved/restored in a Json format
    - Improved RDS AF function with automatic storing and merging of alternative frequencies found
    - Notifications Toasts
    - Selectable Radio Region
    - Station editable elements : Position, Frequency, Name, Logo, Favorites
    - 2 Homepage Widgets, horizontal and vertical design
    - Floating widget
    - Autostart on boot option
    - Support 800x480, 1024x600, 1280x720 and 1920x1080 display resolutions
    - Resizable Texts elements
    - App full settings backup/restore function


    List of available Logos by nationality, in Bold the ones with automatic Logos assignement functionality (by RDS id):

    EUROPE: Albania, Andorra, Austria, Australia, Belgium, Bulgaria, Bosnia and Herzegovina, Belarus, Cyprus,Croatia, Czech Republic, Denmark, Estonia, Faroe Islands, Finland, France, Germany, Gibraltar, Greece, Hungary, Ireland, Iceland, Italy, Lithuania, Latvia, Liechtenstein, Luxembourg, Macedonia, Malta, Monaco, Moldova, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Russia, Serbia, Slovakia, Slovenia, Sweden, Switzerland, South Korea, Spain, Turkey, Taiwan, Ukraine, United Kingdom

    SOUTH AMERICA: Argentina, Brazil, Chile, Colombia, Mexico, Perù

    USA: Alabama, Alaska, Arizona, Arkansas, California, Canada, Colorado, Connecticut, Delaware, Florida, Georgia, Hawaii, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Massachussets, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, Puerto Rico, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Virgin Island, Washington, Washington DC, West Virginia, Winsconsin, Wyoming

    CHINA, JAPAN, MALAYSIA, PHILIPPINE
    MOROCCO, TUNISIA, SOUTH AFRICA
    AUSTRALIA, NEW ZAELAND

    Some pictures:
    1S3mHPul.png
    GLZUaNcl.png
    BWakEZHl.png
    sSiu1Otl.png

    9ecxWEI.png
    iCr42okl.png
    vNqsB5zl.png
    0Nyk1grl.png
    zTteN75.png
    C6uCg0y.png
    NQ8eATB.png
    TOgJo5U.png
    View
    15
    K
    KoTiX2
    Ok then... The new version 3.16 is on the way to PlayStore with fixes and the "set station by picode" request ;)

    - Fixed bad highlight of stations using steering wheel commands
    - Fixed ClearList not cleaning stations
    - Fixed small frequency text in carousel view
    - Stations are now set by pi-code when it's received
    View
    11
    K
    KoTiX2
    Coming up on next v3.13:

    - (FYT) Fixed issue with MODE button and launcher icon
    - (FYT) AFSeek is now disabled if another player is playing
    - (FYT) Fixed some more afseek bugs
    - Increased text sizes in Split Screen
    - Fixed another bug while merging stations
    View
    11
    K
    KoTiX2
    Navradio version 3.14 is on the way.
    Here the changelog:
    - Changed Stations numbering in grid view
    - Improved sliding movements and pagination of stations buttons
    - Changed "Frequency Merge" setting selectable by "Off-AfterConfirmation-Fully Automatic"
    - Updated Morocco and Portugal logos
    View

New posts