[DEV][ROM][4.3]Cyanogenmod 10.2[WIP][RC-2][STABLE]

[yajnab]

CyanogenMod​

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.

#include <std_disclaimer.h>
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 */

CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.

This Support of the CyanogenMod is Unofficial and the sources are up at Androidarmv6

Installation

- First time flashing CM10.2 to your Galaxy Fit(Beni) (or coming from another ROM)?

1. Root your device and install ClockworkMod Recovery.
2. Reboot into Recovery using 3-button-combo
3. Do a Nandroid backup!
4. WIPE (wipe data/factory reset + wipe cache partition)
5. Install the ROM from internal sdcard using ClockworkMod Recovery
6. Optionally install the Google Addon

- Upgrading from CM7/CM9?

1. Do a Nandroid Backup!
2. WIPE (wipe data/factory reset + wipe cache partition)
3. Install the ROM from internal sdcard using ClockworkMod Recovery
4. Optionally install the Google Addon

- Upgrading from another CM10/CM10.1/CM10.2 prior to 20130816 Build?

1. Do a Nandroid Backup!
2. Install the ROM from internal sdcard using ClockworkMod Recovery
3. Optionally restore /data from Nandroid Backup (the update will wipe your /data)
4. Optionally install the Google Addon

Working List

• Boot
• Display
• Touch
• Sensors
• RIL
• Audio
• Wifi
• Hardware
• SD Card
• OMX
• Camera
• Video Camera
• Tethering(USB and Wifi)

XDA:DevDB Information
[DEV][ROM][4.3]Cyanogenmod 10.2[WIP][ALPHA-4], a ROM for the Samsung Galaxy Fit GT 5670

Contributors
yajnab, yajnab

Version Information
Status: Testing

Created 2013-10-01
Last Updated 2013-12-23

 

[yajnab]

Reserved

 

[yajnab]

Reserved

 

[yajnab]

Credits​

• AndroidArmv6 Team
• CyanogenMod
• Android Open Source Project
• My Father- Dr. Nachiketa Bandyopadhyay
• My most Dear - Darshana Chatterjee
• My COmputer
• My Galaxy Fit
• My BSNL Broadband Connection
• @vishwanathptl- The person who taught me Android
• @cyanogen
• @sakIndia123
• @erikcas
• @bieltv3
• @rashed9
• Andromedia
• @TjStyle
• At last me @yajnab

ScreenShots​

 

[yajnab]

Download Links​

[SIZE="5"][CENTER][COLOR="Red"]Download : >>[URL="http://d-h.st/Ic8"][COLOR="Blue"]RC-2[/COLOR][/URL]

[/COLOR][/CENTER][/SIZE]

Previous Releases

RC-1​

Alpha-5​

Alpha-4​

Patch for Bootimage(Alpha-4)

Alpha-3​

Alpha-2​

Alpha-1​

Changelogs

RC-2

1. Various Upstream Updates
2. Fixed Tethering
3. Fixed VideoCam
4. Can be Used as a Daily driver
5. Decreased Size
6. Various Kernel Optimisation

Alpha-6

1. CyanogenMod and AndroidArmv6 Upstream Updates
2. Goes RC

Alpha-5

1. Camera Fixed
2. CyanogenMod and AndroidArmv6 Upstream Updates

Alpha-4

1. SD card Fixed
2. OMX Fixed
3. CyanogenMod and AndroidArmv6 Upstream Updates

Alpha-3

1. RIL fixed
2. CyanogenMod and AndroidArmv6 Upstream Updates

Alpha-2

1. Updates from Androidarmv6 and CyanogenMod Mainline
2. Fixed Audio
3. Fixed Wifi
4. Smoother than Alpha-1(Though Laggy)
5. Updated KGSL drivers from Linux Kernel 3.0.8
6. Updated Video Drivers from Linux Kernel 3.0.31

 

[yajnab]

FAQS and Question and stuffs

 

[ZmisiS]

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.

#include <std_disclaimer.h>
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 */

CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.

Installation

- First time flashing CM10.2 to your Galaxy Fit(Beni) (or coming from another ROM)?

1. Root your device and install ClockworkMod Recovery.
2. Reboot into Recovery using 3-button-combo
3. Do a Nandroid backup!
4. WIPE (wipe data/factory reset + wipe cache partition)
5. Install the ROM from internal sdcard using ClockworkMod Recovery
6. Optionally install the Google Addon

- Upgrading from CM7/CM9?

1. Do a Nandroid Backup!
2. WIPE (wipe data/factory reset + wipe cache partition)
3. Install the ROM from internal sdcard using ClockworkMod Recovery
4. Optionally install the Google Addon

- Upgrading from another CM10/CM10.1/CM10.2 prior to 20130816 Build?

1. Do a Nandroid Backup!
2. Install the ROM from internal sdcard using ClockworkMod Recovery
3. Optionally restore /data from Nandroid Backup (the update will wipe your /data)
4. Optionally install the Google Addon

Where are link for download and change log?

 

[nolinuxnoparty]

Where are link for download and change log?

Keep patience brother. He might be uploading!

 

[ZmisiS]

Keep patience brother. He might be uploading!

There was no information about the upload, so I asked.

 

[vinayaksuresh]

waaaaaaaoooooo awesome!!!!!!

Awesome Bro
u made it
thank u very much for ur hardwork nd patience for building
4.3

 

[yajnab]

Where are link for download and change log?

Its the initial release so no changelog.. Status yet to be uplaoded after reviews and downlad link is up

 

[ZmisiS]

Its the initial release so no changelog.. Status yet to be uplaoded after reviews and downlad link is up

Yes, I know, but my english not good.

Not have camera, I got notification about stop work some applications, not Gapps for this ROM etc. Not recognized SD Card, Gallery stop work etc.

 

[Rminsh]

So it would be a good ROM for 1 year till next Android version!
What's not working and working?

Sent from my GT-S5670 using Tapatalk 4 Beta

 

[Dark Passenger]

Review

So might have been one of the few who downloaded it first.I installed the rom on a clean device(wiped /system ,/data ,/cache twice ). The rom is a pre alpha and that is pretty obvious wifi,gsm,bluetooth and sdcard not working are a few things I noticed ,the rom isn't smooth well its kind of smooth on some instances and stutters on others.One of the most irritating parts that I found was the random reboots I personally faced then about 3 in 10secs and when I flashed it a second time it became almost impossible to use the device.also i couldnt seem to find the camera app(stock) on first try and on second the camera app icon was visible but on clicking reboot(all reboots were partial) ,also phone app force closes on some instances.Minor ldpi resizing is still required in the rom namingly in the trebuchet launcher icon size(take layouts from cm10) and in the phone apk's dialpad due to the new inbuilt feature for t9.So to sum it up this rom is a good start but definately not for everyone.

Highlights:

Bugs :

>com.cyanogenmod.phone crashes sometimes.

>random reboots(major bug in my opinion and needs to be fixed first).

Not Working :

>sdcard

>camera(couldnt test as app causes a reboot).

>wifi

>bluetooth

>gsm

>others untested.

Other concerns :

ldpi layouts need resizing in trebuchet launcher icon size(pull from erikcas's github or your cm10)

ldpi layouts need fixing for dialpad due to new T9 interface.

 

[TroubleShooter™]

How ?

@yajnab

How do you fix boot ? many legacy devices directly booting to recovery in Android 4.3

 

[yajnab]

@yajnab

How do you fix boot ? many legacy devices directly booting to recovery in Android 4.3

I dunno why they are directly booting to recovery. Maybe Ramdisk problem. or the new fstab version 2 problem.. I will be glad if I get a complete log .. WIthout Log nothing can be said

 

[sudarshan_mehta]

awesome work

first a fall a g8 work from our awesome dev..........:good:
but plz do something for kernel 3.x bro because it will make a lot more things easier and smooth.!!!!!
its a "must" for 10.1 and 10.2!!!! plz do something for it!! :fingers-crossed:

 

[Dark Passenger]

first a fall a g8 work from our awesome dev..........:good:
but plz do something for kernel 3.x bro because it will make a lot more things easier and smooth.!!!!!
its a "must" for 10.1 and 10.2!!!! plz do something for it!! :fingers-crossed:

Hi Sudarshan well just about your comment for kernel 3.x just want to clarify that I spoke to alin.p about this(you know developer of badass kernel) .

He told me that firstly it will be a reaaaal big pain in the ass and the efforts required will be massive for any developer trying to do so.

Secondly the kernel will be slower or equal to the performance quality of the current kernel being used(this in context with his badass kernel).

Thirdly a similar chat with erikcas resulted in me asking about how a cleaner code path is the best way to get max performance( for real that is).

alin.p answered this by letting me know that the hacks used currently for badass or standard android 4.x kernel in our armv6 devices shall remain (as they are device specific and required to run the kernel on our devices).

so the performance you get using the badass kernel is the most you can ever hope from our devices(IMO for any rom ....and i speak from experience with galaxy fit).

so enjoy the device while it manages to last cause from what i hear 5.0 wont ever run on an armv6 device(they are but rumours).

Regards,
Dark Passenger.

PS if you are wondering badass has most of the features from 3.8 and 3.4(the best selection in concern to our device) and so its kind of like a cyborg kernel that is 90% machine and only 10% human(the 10% being the 2.6 part).

 

[AleksaSavic]

I dunno why they are directly booting to recovery. Maybe Ramdisk problem. or the new fstab version 2 problem.. I will be glad if I get a complete log .. WIthout Log nothing can be said

Downloading right now, will see if it boots!

 

[yajnab]

Hi Sudarshan well just about your comment for kernel 3.x just want to clarify that I spoke to alin.p about this(you know developer of badass kernel) .

He told me that firstly it will be a reaaaal big pain in the ass and the efforts required will be massive for any developer trying to do so.

Secondly the kernel will be slower or equal to the performance quality of the current kernel being used(this in context with his badass kernel).

Thirdly a similar chat with erikcas resulted in me asking about how a cleaner code path is the best way to get max performance( for real that is).

alin.p answered this by letting me know that the hacks used currently for badass or standard android 4.x kernel in our armv6 devices shall remain (as they are device specific and required to run the kernel on our devices).

so the performance you get using the badass kernel is the most you can ever hope from our devices(IMO for any rom ....and i speak from experience with galaxy fit).

so enjoy the device while it manages to last cause from what i hear 5.0 wont ever run on an armv6 device(they are but rumours).

Regards,
Dark Passenger.

PS if you are wondering badass has most of the features from 3.8 and 3.4(the best selection in concern to our device) and so its kind of like a cyborg kernel that is 90% machine and only 10% human(the 10% being the 2.6 part).

I think the news is not well flashed to you all.. Samsung MSM7x27 3.x kernel is just a step ahead.. What we need is to get the mtd working on our device. The main problem is one error can get our device bricked during development.. My UART is arriving the next week lets see if i can get the mtd working in the device. After that nearly everything will be easy as LG has already got a stable 3.x kernel to work with.. ...