Search This thread

FlorisNL

Senior Member
Jun 28, 2011
523
415
Amersfoort
Connect your phone with your pc and start adb. Shut down your phone.

Type in
Code:
adb logcat > log1.txt

Turn on your phone, it will detect your phone after Samsung logo.
Log1.txt will be saved in your ADB folder

When I do that.. I just get Daemon started... But when the bootanimation is busy.. i get a LOT of text.. Im not able to post it because its 700000 characters.. ;p I'll just try again the whole process of installing.
 

FlorisNL

Senior Member
Jun 28, 2011
523
415
Amersfoort
Check your PM, should be there.

EDIT: To stop next questions:

I'm using CM9 almost from begnning and it is working realy nice, no bigest problems.
So do in this way:
1. Install official ROM 2.3.6(http://forum.xda-developers.com/showthread.php?t=1533029) - Odin
2. Install FeaMod Recovery(http://forum.xda-developers.com/showthread.php?t=1331164) - Odin
3. Install Arco Recovery(http://speedy.sh/bjt8H/CM9-Recovery.zip) - FeaMod Recovery
4. Do full wipe from system(use code, like dialing: *2767*3855#) - Do backup of internal SDCard beacuse wipe will remove everything
5. Install Arco last stable ROM(http://www.mediafire.com/?1acdn3xfayef1wm) - Arco Recovery
6. Install Arco last kernel(http://www.mediafire.com/?bc46rahh170v74a) - Arco Recovery
Enjoy, hit THX :).

Do I have to use XXKQ7? Maybe thats the problem, I was using XXKQB
 

uberto.costanzo

Senior Member
Sep 25, 2008
1,415
87
Venice Italy
i use kqb but for me work wery good after installation i have change recovery whit feam recovery odin 1.4 and all work equal also whit backup and restore. thanks sorry for my english:D
 

oisis

Senior Member
Oct 9, 2008
1,251
2,095
Out of nowhere
You don,t need a stock rom first ;)

Verstuurd van mijn GT-I9001 met Tapatalk

I made small howto for beginners, was easier for me to start from some point and that is why i started from installing stock rom. Of course you don't need stock rom but later on can be question like: can i use this rom or that one. In how to is missing point with wipe cache and dalvik but i always doing this before and after rom instalations.

Hope now you understand my point of view.
 

ad0dh

Senior Member
Feb 7, 2012
384
172
I made small howto for beginners, was easier for me to start from some point and that is why i started from installing stock rom. Of course you don't need stock rom but later on can be question like: can i use this rom or that one. In how to is missing point with wipe cache and dalvik but i always doing this before and after rom instalations.

Hope now you understand my point of view.

I do ;) but biggest problem is people don,t read so the questions stay

Verstuurd van mijn GT-I9001 met Tapatalk
 

texten

Senior Member
Apr 4, 2012
1,306
1,503
i know, i have posted it in some other threads, but i think here is the right place ;)

i have compared cm9 with kqb, folder by folder

i have seen there are some files missing in cm9 (alpha build3 by arco) for tvout, wifi, audio, fm and something more...
if someone wants to play around, here are all files which are not included in cm9 so far.

i don't know which files we will need, so give it a try and be carefully while changing configurations.....

all_kqb_files_missed_in_cm9.rar
 
Last edited:
  • Like
Reactions: oisis

oisis

Senior Member
Oct 9, 2008
1,251
2,095
Out of nowhere
i know, i have posted it in some other threads, but i think here is the right place ;)

i have compared cm9 with kqb, folder by folder

i have seen there are some files missing in cm9 (alpha build3 by arco) for tvout, wifi, audio, fm and something more...
if someone wants to play around, here are all files which are not included in cm9 so far.

i don't know which files we will need, so give it a try and be carefully while changing configurations.....

all_kqb_files_missed_in_cm9.rar

Thanks for your work this information will very usefull for somebody who is porting roms. I included some libs from stock that they are missing in CM9 to AOKP. Now i'm going to check attached zip and compare to my AOKP. Missing files can resolve part of problems with audio, sensors, camera etc. Thanks a lot.
 
Last edited:
  • Like
Reactions: sqnyster

texten

Senior Member
Apr 4, 2012
1,306
1,503
Thanks for your work this information will very usefull for somebody who is porting roms. I included some libs from stock that they are missing in CM9 to AOKP. Now i'm going to check attached zip and compare to my AOKP. Missing files can resolve part of problems with audio, sensors, camera etc. Thanks a lot.


you're welcome, it's just for our galaxy s plus.
i guess, we all want the same thing - a complete samsung galaxy s plus, which can beat all other devices. :eek:


maybe these files can help to solve the issue with tethering,too.

-----------------------------


edit: maybe we should collect the known issues so far and test step by step with these files above.

here is a small collection: CyanogenMod 7.1 and 9.0 [Porting state]

don't know if this is all...

what i know so far:

- incall volume
- loudness of keyfeedback
- fm radio
- usb tethering
- short cracking sound when reboot
- powermenue is not working (reboot, reboot to recovery)
- wifi connection
- camera
- tv out
 
Last edited:
  • Like
Reactions: sqnyster

Top Liked Posts

  • There are no posts matching your filters.
  • 116
    Fix for recovery bootloop problem

    Thanks to everyone who hear my pray and tried to help with my problem (bootloop into recovery). And Acro68 sorry that i'm bothered you. I here again to publish the solution. Problem was in bootloader, like people on other forum says (it was damaged somehow, probably because kies update fails before).

    1. Open Odin.exe (UnZip from Odin.zip)
    2. Go into Download mode
    3. Select OPS - AriesVE.ops (UnZip from AriesVE.zip)
    4. Select BOOT - Boot_loader.tar
    5. Flash it and bootloop into recovery never gona happen.

    All the files is attached...
    88
    I and some fellow developers (especially thanks manveru0, skywalker01, other users for testing, reporting and other help) are trying to port AOSS to our device, working with CyanogenMod 7 for now.
    You can check out this thread, repositories, and this post for changelogs, bug reports and so on.
    Github repositories:
    https://github.com/abbradar
    https://github.com/manveru0
    Feel free to check them out and fork!

    Current status of porting:
    Working:
    • Screen (w. touch features, w. backlight)
    • Buttons
    • Radio (w. 2G/3G, Internet is working)
    • Bluetooth
    • WLAN
    • Rotate sensor
    • Handset button
    • USB
    • Battery sensors
    • Camera
    • GPU acceleration
    Not working:
    • GPS (does not lock)
    • Audio (both input and output, will be tough)
    • Camcorder (because of audio)
    • Storage-related (external SD not working, internal with no USB storage, vold misconfigured)
    • USB tethering/MTP (will require some programming)
    • Host access point (similar to USB tethering)
    • Light sensor
    • Buttons force feedback
    • Contacts on SIM card
    Not tested:
    • Other sensors (compass, magnetic)
    • HDMI (should not work, as logs say)
    • FM radio (should not work)
    Another bugs:
    • CyanogenMod settings doesn't work (fixed by
    • Random reboots sometimes
    • Sometimes - very long resume from sleep (30 seconds approximately)
    • Keyboard is very small
    • Dialer is laggy (because of audio)
    • USB connected notification is shown without USB cable attached
    • APN database is not working (enter settings manually)
    • Vibration strength is very weak
    Regressions: (worked before)
    • Nothing for now
    Visualized changelogs (with CM9), made and hosted by CastagnaIT in dedicated thread:
    http://forum.xda-developers.com/showthread.php?t=1492165

    Last testing build (will be updated after major improvements or after some time): http://forum.xda-developers.com/showpost.php?p=22394052&postcount=284
    skywalker01's testing builds: http://forum.xda-developers.com/showpost.php?p=22969855&postcount=394

    User tomsteel1 have made good-looking banner images for our work: http://forum.xda-developers.com/showpost.php?p=22506050&postcount=350
    45
    Hello, guys.
    First of all, sorry for my 2.5-month absence, I was really short of time because of university and long illness, so I decided to freeze module development for a while. I understand that doing so without any posts there was rude, and ask for understanding.
    Next, it was a great surprise for me to see really working CM9 for our phone!!! I can only say GJ to arco68 - thank you guy, you really did this, even without a phone! I don't think my work is relevant anymore, so I'll stop with CM7 and will check out his work (maybe I'll be of some help). I've been able to found quick solution for working audio in 2.3.7, also, but I don't think it is relevant anymore ^_^.
    Once again, good job, arco68. I'll try to build CM9 with your configuration and test it, so I'm going to be just user and tester for now. ^_^
    43
    Here's a new full test build of the rom. This contains fixed boot image, so it actually boots (unless I screwed something up this time :p). USB connect/disconnect should work correctly, wifi I *hope* works now. In addition I added support for automatic brightness and cleaned up some stuff.

    http://www.mediafire.com/?sgyv7betz6cj9mp

    And lol at the tags. Who wrote that? :D
    41
    I am a CM9 porter for Galaxy SL. I have come across issues with audio in Galaxy SL also, which I have overcome by coding an Audio wrapper. If you need any help with fixing audio on S+, count me in.