(DEVS)Kernel Config from Mytouch 2.1/ Fender LE

[crypysmoker]

Not really sure what this does..
Its the kernel config file from the fender 1.6 dump. No other rom will use touch screen abilities with this phone except stock so Cursordroid concluded the kernel may be different.

If anyone can use this to make a kernel, or port roms it would be greatly appreciated. Sux having a rooted phone while having to use the stock rom lol

If I knew how to do it I would hop on it... but I is not as smarts as youu guyz

Remove .zip from end of file

EDIT- When the new Mytouch 1.2 comes out in the next couple months, this will be the same build included on it. so nothing like ahead start lol

 

[wesgarner]

Not really sure what this does..
Its the kernel config file from the fender 1.6 dump. No other rom will use touch screen abilities with this phone except stock so Cursordroid concluded the kernel may be different.

If anyone can use this to make a kernel, or port roms it would be greatly appreciated. Sux having a rooted phone while having to use the stock rom lol

If I knew how to do it I would hop on it... but I is not as smarts as youu guyz

Remove .zip from end of file

EDIT- When the new Mytouch 1.2 comes out in the next couple months, this will be the same build included on it. so nothing like ahead start lol

Going to look at this - thanks

 

[crypysmoker]

will be so happy if this is an easy fix. Thanks Wes. Didnt even occur to me the changes for the 3.5mm jack output would cause problems

 

[wesgarner]

Going to look at this - thanks

See a few things different in the config
Will have to port over the 3.5mm headphone drivers

 

[wesgarner]

Try this one out - should work on an WG-Kernel builds aka WG-Build and maybe a couple others, not sure
But should let you test real quick if you through my build on there then fastboot this boot.img
Oo it technically works on CM builds too - but nothing would really work lol (at least the touchscreen would)

I am betting this won't work but eh worth a try lol

 

[wesgarner]

will be so happy if this is an easy fix. Thanks Wes. Didnt even occur to me the changes for the 3.5mm jack output would cause problems

lol yea requires new drivers to get it to work - they are on the MSM .32 git, I will have to backport them - no biggie for that I'm sure

 

[crypysmoker]

Try this one out - should work on an WG-Kernel builds aka WG-Build and maybe a couple others, not sure
But should let you test real quick if you through my build on there then fastboot this boot.img
Oo it technically works on CM builds too - but nothing would really work lol (at least the touchscreen would)

I am betting this won't work but eh worth a try lol

lol Worth a shot.. I already got through the dangourus stuff. I use yours as it is on my spare G1 so no worries about it on here. Ill let you know the outcome.

 

[crypysmoker]

Try this one out - should work on an WG-Kernel builds aka WG-Build and maybe a couple others, not sure
But should let you test real quick if you through my build on there then fastboot this boot.img
Oo it technically works on CM builds too - but nothing would really work lol (at least the touchscreen would)

I am betting this won't work but eh worth a try lol

Argh..
Flashed your newest build, then tried to flash the boot.img.zip file with verification failed. then onto remember that I have the perfected spl on when I tried to flash it lol. Without having a physical keyboard like the g1, and needing to flash the boot.img before boot... is there another way?

Also find that since we had to use a 32B recovery on a 32a phone... nandroid will not work in recovery. Guess ill try fastboot laster

 

[mayormullet]

Argh..
Flashed your newest build, then tried to flash the boot.img.zip file with verification failed. then onto remember that I have the perfected spl on when I tried to flash it lol. Without having a physical keyboard like the g1, and needing to flash the boot.img before boot... is there another way?

Also find that since we had to use a 32B recovery on a 32a phone... nandroid will not work in recovery. Guess ill try fastboot laster

Try:

adb remount
adb shell
flash_image boot /sdcard/boot.img
reboot

EDIT: I tried that and this is what I got:

mtd: write error at 0x00140000 (Out of memory)
mtd: verification error at 0x00140000 (Out of memory)
mtd: wrote block after 1 retries
mtd: write error at 0x00160000 (Out of memory)
mtd: verification error at 0x00160000 (Out of memory)
mtd: wrote block after 1 retries

darn

 

[wesgarner]

Ok... would have just built a kernel for this that should (theoretically) work based off the nexusone kernel...
My battery just died on my laptop
Was a good idea! lol
Will compile in a little while and post

 

[crypysmoker]

no rush at all guys and I thank those of you that hopped on this much quicker then I expected. eminds me of the old dreamcast homebrew days where everyone actualy worked together rather then who gets the most credit for what.

We got the hard part done.. now onto the fun part. And, at the same time if we dont get a full rom going by the OTA 2.1 update, at least we will have straight dumps off the phones lol

 

[sanpei]

use the custom kernel, and post the dmesg

 

[wesgarner]

Compiling the new kernel now lol - sorry for the delay
Will build it into my current git beta build of y-2.7 lol

 

[crypysmoker]

Compiling the new kernel now lol - sorry for the delay
Will build it into my current git beta build of y-2.7 lol

Awesome. If possible please let me know once finished for testing.
I cant belive at how many people start bugging you for stuff when your the first to find something. Honestly, My gtalk friends grew 10fold by 3am, of which 6 I had to explain what "stock rom" meant lol How many times can I hear "but whats the point if it doesnt look different" before I want to smackanoob lol

 

[maxisma]

HTC has to release this Kernel source too.

 

[crypysmoker]

HTC has to release this Kernel source too.

Awwww. noo BOOOO dont tell me that lol. I mean, its fine now because im still using my g1 as to no hurt my wittle fender baby lol.
But once the new mytouch comes out there will be a flood of noobiness over this. But at least I got it out thier early so the good ones can have at it.
By the way, LOVE the quote in yoru sig. Kinda like question I used to get asked back in Xbox 1 modding days. "where is bios and can I take it out?" "I type FTP into my web browser and it wont see my xbox" "

 

[wesgarner]

HTC has to release this Kernel source too.

Actually looks like the kernel source is active on the android-msm-2.6.29-nexusone

 

[crypysmoker]

Actually looks like the kernel source is active on the android-msm-2.6.29-nexusone

Ouuuu. so if its running on same/similar kernel to Nexus one... 2.1 will run with ease.. at least the OTA version will lol.
But, at same time, lot of people going to be ad they grabbed up that nexus one.

 

[maxisma]

Actually looks like the kernel source is active on the android-msm-2.6.29-nexusone

You could be right..

http://android.git.kernel.org/?p=ke...118;hb=refs/heads/android-msm-2.6.29-nexusone

-rwxr-xr-x
board-sapphire-gpio.c
blob | history | raw


-rwxr-xr-x
board-sapphire-h2w.c
blob | history | raw


-rwxr-xr-x
board-sapphire-keypad.c
blob | history | raw


-rwxr-xr-x
board-sapphire-mmc.c
blob | history | raw


-rwxr-xr-x
board-sapphire-panel.c
blob | history | raw


-rwxr-xr-x
board-sapphire-rfkill.c
blob | history | raw


-rwxr-xr-x
board-sapphire-wifi.c
blob | history | raw


-rwxr-xr-x
board-sapphire.c
blob | history | raw


-rwxr-xr-x
board-sapphire.h
blob | history | raw

 

[thebluecoat]

crypysmoker,

If we are rocking the same kernel off of the nexus one, what does that mean for us in the future? Are we going to be able to do things quite similar?