• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

♦ [ROM][ks01lte][6.0] Temasek's UNOFFICIAL CyanogenMod 13 ♦

Search This thread

arter97

Recognized Developer
Oct 14, 2012
3,782
33,955
24
Seoul
mIy1TyC.png


temasek's UNOFFICIAL CM 13 BUILDS
OFFICIAL ROM MAINTAINER THREAD

This is the official maintainer thread for all current and future unofficial builds of CM-13.0; source-worked by @temasek, built to Galaxy S4 LTE-A(ks01lte) by @arter97. This thread was created on his behalf and will be maintained accordingly. Please report any bugs or issues that you see; when applicable, please follow the bug reporting format found in post #3. Download links, changelogs and other important information can be found in post #2. Thank you.

DISCLAIMER
Code:
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
 */

dalPu6H.png

Download Links and Changelog
FAQ and Trouble Shooting

SxKmg8F.png

The lastest version of PhilZ Touch recovery is recommended.
http://www.arter97.com/browse/S4/recovery

Clean Installation
1. Download the appropriate ROM using links provide in the second post.
2. Download the appropriate GApps following the links in the second post.
3. Back up any and all important data.
5. WIPE DALVIK/CACHE/DATA/FACTORY RESET.
6. WIPE SYSTEM.
7. Flash the ROM in recovery.
7.1. DO NOT FIX PERMISSIONS AFTER FLASHING, doing so will cause a bootloop.
8. Flash the GApps.
8.1. If you're an i9506 user, flash the fix file from here : http://www.arter97.com/browse/S4/etc/i9506_patch
9. Install arter97 kernel from here : http://www.arter97.com/browse/S4/kernel/AOSP_M
10. WIPE DALVIK/CACHE (for good measure).
11. Reboot Device.

Dirty Flash/Update
1. Download the appropriate ROM using links provide in the second post.
2. WIPE CACHE/DALVIK.
3. Install the update zip from recovery.
3.1. DO NOT FIX PERMISSIONS AFTER FLASHING, doing so will cause a bootloop.
4. WIPE DALVIK/CACHE (for good measure).
5. Reboot Device.

zoyBj1O.png


rHkzLA0.png


More:
sOBPbcR.png


X6Buelf.png



8TBhvee.png

@arter97
@temasek

67PE5Dv.png

Please consider donating! http://forum.xda-developers.com/donatetome.php?u=4898097

XDA:DevDB Information
♦ [ROM][ks01lte][6.0] Temasek's UNOFFICIAL CyanogenMod 13 ♦, ROM for the Samsung Galaxy S 4

Contributors
arter97, temasek
Source Code: https://github.com/temasek

ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: arter97 kernel for Android 6.0
Based On: CyanogenMod 13

Version Information
Status: Beta

Created 2015-04-14
Last Updated 2016-01-07
 

arter97

Recognized Developer
Oct 14, 2012
3,782
33,955
24
Seoul
W09eVKN.png


MY SD Card Isn't Working
- Format the SD Card in recovery to Ext4 (from FAT) and it should be good to go. Besides, who likes the 3.9GB file limit of FAT anyways :)
- NTFS formatting also works, but SD card is no longer detectable in recovery.

Help! Miscellaneous is draining my battery!
Miscellaneous itself is not some mystical process that drains battery. It's showing the difference between estimated battery drain and actual battery drain (so more like a summation of all of the miscellaneous processes that drained the battery unexpectedly).

Work In Progress. Will be updated as comments are added.


WRSPdM2.png


If you are experiencing any issues and have performed a dirty flash, please try a clean flash prior to posting your question. Thank you!
If you have an issue and want require help, please submit a kmsg log with the following information:

Note: Do not pull out battery or else no log; this log can be located at: /proc/last_kmsg

When Possible, Please Include:
- Instructions to recreate the error you encountered.
- Any other relevant information (i.e. Kernel version/Build, etc.).

Please read all of the OP before you post. Do not report issues on previous builds only on the latest.
 
Last edited:

fattymcdirty

Senior Member
Jan 6, 2010
822
85
I encounter a smoothness-issue with one specific animation. If you enter Settings and e.g. WLAN - and THEN press the back-button - that animation is not smooth somehow. Can you check that? Everything else is very smooth with V. 9.7 and Kernel 5.2. Thanks for this!
 

wkwk

Senior Member
Jan 11, 2007
270
42
Tried dirty flash over Temasek 9.6 and kernel 5.2, got system UI FC over and over again, not allowing boot to proceed.

Next I wiped device, installed rom, kernel and supersu. Booted device, after successful boot I flashed PA GAPPS, now there is no problem. Great work as always Arter.
Flashing 5.3 kernel now, will observe smart watch performance.
Also I'm on Philz recovery.

Sent from my SHV-E330S using XDA Free mobile app
 
Last edited:

Juhkimo

Senior Member
Mar 11, 2015
368
150
Nokia
ROM Firmware Required: arter97 kernel for Android 5.1 Touchwiz Lollipop?
I think you mean 5.1 aosp lollipop

Anyway downloading now and I will give it a try :)
 
Last edited:

Notfast

Senior Member
Nov 26, 2012
63
24
I encounter a smoothness-issue with one specific animation. If you enter Settings and e.g. WLAN - and THEN press the back-button - that animation is not smooth somehow. Can you check that? Everything else is very smooth with V. 9.7 and Kernel 5.2. Thanks for this!

I got the same.
If I got to settings and press back, then animation is smooth.
But if I got to settings and one level deeper (any level or sub menu), and press back then first animation is not smooth, but second is smooth as before.
 

Ryno101

Member
May 14, 2012
13
0
Everything works for me except video recording and playback.
Playback is particularly annoying. I have had this problem with 5.0.1 as well.

Please help!
 

og2345

Member
Dec 19, 2014
29
6
Helsinki
503 Service Temporarily Unavailable

nginx/1.4.6 (Ubuntu)

This happends to me when Im trying to download kernel and patch!
 

Genebaby

Senior Member
Dec 11, 2013
717
92
Tried dirty flash over Temasek 9.6 and kernel 5.2, got system UI FC over and over again, not allowing boot to proceed.

Next I wiped device, installed rom, kernel and supersu. Booted device, after successful boot I flashed PA GAPPS, now there is no problem. Great work as always Arter.
Flashing 5.3 kernel now, will observe smart watch performance.
Also I'm on Philz recovery.

Sent from my SHV-E330S using XDA Free mobile app
Very interested in smart watch performance, thanks.
 

Top Liked Posts