[DISCONTINUED][CWM/cLK] Revolution HD v2.6.2 & SL v1.4.2

what should i have in the next release wrt sd usability?

  • a2sd+

    Votes: 390 53.0%
  • data2sd

    Votes: 216 29.3%
  • none

    Votes: 130 17.7%

  • Total voters
    736
Search This thread

LoDIR

New member
Jul 25, 2008
3
0
Yeah.... We Love your Rom and the work you do. Otherwise we wouldn't complain ... Just taking another Rom would fix the Problem ;-)

So, just speaking for me: I have the Issue with a "Virgin Installation"
Nothing Else is installed. Previously i had the 2.3 mdj installed with Win6.5, working perfekt.
 
It was not supposed to a dig from me. it was my observation. Everyone uses their phones differently.

I will do further extensive tests, and see what I can find.

Did you have the same problem with earlier releases?

So, i use my phone as a....phone (just kidding :) )
Hm, with earlier releases i didn't have problems, i think...
And i install this rom three times with clean caches. So, like i say, the problem with the sound is sometimes there, sometimes not. When it is i do a restart and its ok. But the problem with the "self ending call before or during dial" is weird. Have no idea what that can be..
 

francescozanghetta

Senior Member
Nov 29, 2009
142
25
London
Problem with internal memory

Fist of all, your rom is great, but i have a small problem with the internal memory which is too small after installation (about 100M). I have sd card with 2 partition; fat32 and a 1g ext4. My config.txt is as follow:
ppp_mode=1
a2sd_mode=data.
And i even ran the script: adb shell a2sd datasd.
Nevertheless those things my internal memory still small.
Thanks in advance
 

arif-ali

Retired Recognized Developer
Nov 14, 2007
1,005
1,455
Sheffield
blog.arif-ali.co.uk
Fist of all, your rom is great, but i have a small problem with the internal memory which is too small after installation (about 100M). I have sd card with 2 partition; fat32 and a 1g ext4. My config.txt is as follow:
ppp_mode=1
a2sd_mode=data.
And i even ran the script: adb shell a2sd datasd.
Nevertheless those things my internal memory still small.
Thanks in advance

do you have a full-stop at the end of the data

you do not want a . at the end otherwise it won't work

if that is not the case, run: adb shell ls -l /data/
and get me the output.

Can you also attach your logcat from the phone
 

arif-ali

Retired Recognized Developer
Nov 14, 2007
1,005
1,455
Sheffield
blog.arif-ali.co.uk
Can you show a detail list what apps you´ve removed?

Are you trying to find the difference between 2.6.2 and 1.4.2, or are you trying to find in general in what I have removed

If it is the first case, then check the following link, which has already been mentioned in the thread earlier

http://gitorious.org/android-leo-revolution/revolution-hd/blobs/master/tools/SL_remove

wrt, what I have removed in respect to the original ROMs, then I don't have an answer to that, as I only took over from another person, and I do not know what he removed. His changelog is in the 3rd post as well.
 

francescozanghetta

Senior Member
Nov 29, 2009
142
25
London
internal memory low

do you have a full-stop at the end of the data

you do not want a . at the end otherwise it won't work

if that is not the case, run: adb shell ls -l /data/
and get me the output.

Can you also attach your logcat from the phone


This is the output of adb shell ls -l /data/
Code:
C:\USERS\PEPPONE adb shell ls -l /data/
drwxrwxr-x    1 1000     1000          2048 Mar 24 19:46 ←[1;34manr←[0m
lrwxrwxrwx    1 0        0               11 Mar 23 20:35 ←[1;36mapp←[0m -> ←[1;3
4m/sd-ext/app←[0m
lrwxrwxrwx    1 0        0               19 Mar 23 20:35 ←[1;36mapp-private←[0m
-> ←[1;34m/sd-ext/app-private←[0m
drwx------    1 1000     1000          2048 Mar 24 19:47 ←[1;34mbackup←[0m
drwxrwxrwx    1 0        0             2048 Mar 24 19:47 ←[1;34mcachemnt←[0m
lrwxrwxrwx    1 0        0               20 Mar 23 20:35 ←[1;36mdalvik-cache←[0m
 -> ←[1;34m/sd-ext/dalvik-cache←[0m
lrwxrwxrwx    1 0        0               12 Mar 24 08:44 ←[1;36mdata←[0m -> ←[1;
34m/sd-ext/data←[0m
drwxr-x---    1 0        1007          2048 Mar 23 20:36 ←[1;34mdontpanic←[0m
lrwxrwxrwx    1 0        0               11 Mar 23 20:36 ←[1;36mdrm←[0m -> ←[1;3
4m/data/local←[0m
-rw-r--r--    1 0        0             8832 Mar 24 19:45 ←[0;0mdta2sd.lg1←[0m
-rw-r--r--    1 0        0             8832 Mar 24 19:45 ←[0;0mdta2sd.lg2←[0m
-rw-r--r--    1 0        0             8832 Mar 24 19:45 ←[0;0mdta2sd.log←[0m
-rw-rw-rw-    1 0        0              453 Mar 23 20:35 ←[0;0mdtinstall.log←[0m

-rw-r--r--    1 0        0                0 Mar 23 20:36 ←[0;0mfix_permissions.l
og←[0m
drwxrwx--x    1 2000     2000          2048 Mar 23 20:36 ←[1;34mlocal←[0m
drwxrwx---    1 0        0             2048 Mar 23 20:36 ←[1;34mlost+found←[0m
drwxrwx--t    1 1000     9998          2048 Mar 24 20:18 ←[1;34mmisc←[0m
drwx------    1 0        0             2048 Mar 24 20:17 ←[1;34mproperty←[0m
drwxrwxr-x    1 1000     1000          2048 Mar 24 20:18 ←[1;34msystem←[0m
drwxr-xr-x    1 1000     1000          2048 Mar 24 19:44 ←[1;34mtombstones←[0m
Can you explain me how to do logcat? Thank in advance
 

M.F.

Member
Dec 1, 2008
21
2
Hannover
Update

Hello,

I have installed the Version 2.6.1 and i want update to the version 2.6.2.

I have installed over clkmod.

Wath must i do to install the new version without lost my apps, my data and my layout.

Is it possible to update without lost this?

M.F.
 

arif-ali

Retired Recognized Developer
Nov 14, 2007
1,005
1,455
Sheffield
blog.arif-ali.co.uk
Hello,

I have installed the Version 2.6.1 and i want update to the version 2.6.2.

I have installed over clkmod.

Wath must i do to install the new version without lost my apps, my data and my layout.

Is it possible to update without lost this?

M.F.

1. to make sure, make a nand backup
2. install the new zip
3. then restore the data partition (just to make sure)

and then that should do it

This is the output of adb shell ls -l /data/
Code:
C:\USERS\PEPPONE adb shell ls -l /data/
drwxrwxr-x    1 1000     1000          2048 Mar 24 19:46 ←[1;34manr←[0m
lrwxrwxrwx    1 0        0               11 Mar 23 20:35 ←[1;36mapp←[0m -> ←[1;3
4m/sd-ext/app←[0m
lrwxrwxrwx    1 0        0               19 Mar 23 20:35 ←[1;36mapp-private←[0m
-> ←[1;34m/sd-ext/app-private←[0m
drwx------    1 1000     1000          2048 Mar 24 19:47 ←[1;34mbackup←[0m
drwxrwxrwx    1 0        0             2048 Mar 24 19:47 ←[1;34mcachemnt←[0m
lrwxrwxrwx    1 0        0               20 Mar 23 20:35 ←[1;36mdalvik-cache←[0m
 -> ←[1;34m/sd-ext/dalvik-cache←[0m
lrwxrwxrwx    1 0        0               12 Mar 24 08:44 ←[1;36mdata←[0m -> ←[1;
34m/sd-ext/data←[0m
drwxr-x---    1 0        1007          2048 Mar 23 20:36 ←[1;34mdontpanic←[0m
lrwxrwxrwx    1 0        0               11 Mar 23 20:36 ←[1;36mdrm←[0m -> ←[1;3
4m/data/local←[0m
-rw-r--r--    1 0        0             8832 Mar 24 19:45 ←[0;0mdta2sd.lg1←[0m
-rw-r--r--    1 0        0             8832 Mar 24 19:45 ←[0;0mdta2sd.lg2←[0m
-rw-r--r--    1 0        0             8832 Mar 24 19:45 ←[0;0mdta2sd.log←[0m
-rw-rw-rw-    1 0        0              453 Mar 23 20:35 ←[0;0mdtinstall.log←[0m

-rw-r--r--    1 0        0                0 Mar 23 20:36 ←[0;0mfix_permissions.l
og←[0m
drwxrwx--x    1 2000     2000          2048 Mar 23 20:36 ←[1;34mlocal←[0m
drwxrwx---    1 0        0             2048 Mar 23 20:36 ←[1;34mlost+found←[0m
drwxrwx--t    1 1000     9998          2048 Mar 24 20:18 ←[1;34mmisc←[0m
drwx------    1 0        0             2048 Mar 24 20:17 ←[1;34mproperty←[0m
drwxrwxr-x    1 1000     1000          2048 Mar 24 20:18 ←[1;34msystem←[0m
drwxr-xr-x    1 1000     1000          2048 Mar 24 19:44 ←[1;34mtombstones←[0m
Can you explain me how to do logcat? Thank in advance

OK, the output for logcat will be long, so add it as an attachment, or post it on pastebin

so, run the following 2 commands after you have rebooted the phone. so that I can see what is happening at the beginning

adb shell ls -la /data
adb shell df -h
adb logcat
 

francescozanghetta

Senior Member
Nov 29, 2009
142
25
London
Sorry but i haven't understood well. do i have to run the first two commands (1. adb shell ls -la /data 2. adb shell df -h) and after i restarted and run the third command (3. adb logcat)?:confused:
Thanks

Ps Does the logcat stop by itself or i must run any command????
 

arif-ali

Retired Recognized Developer
Nov 14, 2007
1,005
1,455
Sheffield
blog.arif-ali.co.uk
Sorry but i haven't understood well. do i have to run the first two commands (1. adb shell ls -la /data 2. adb shell df -h) and after i restarted and run the third command (3. adb logcat)?:confused:
Thanks

yes, you are right

before reboot:

* adb shell ls -la /data
* adb shell df -h
* adb shell cat /sdcard/config.txt

after reboot:

* adb logcat
 

arif-ali

Retired Recognized Developer
Nov 14, 2007
1,005
1,455
Sheffield
blog.arif-ali.co.uk
this is my log.
Thanks in advance.

OK, that is normal

Your phone is only reporting the space left in the /data folder, and the system settings that are reporting know nothing about the space on the sdcard that you configured for data2sd.

I'm not sure exactlt what tools you can use graphically to check

Your data2sd is in-fact working.

Don't worry about the 80M free space, that will hardly be touched, and will not reduce
 

Top Liked Posts

  • There are no posts matching your filters.
  • 50

    This build is a rework/continuation of MDJ Revolution series

    I started this thread, as there was some demand for this to get updated. If m-deejay decides to update his original build, I will discontinue this build

    Use this at your own risk. I will not be accountable if this causes you phone to fail, or you lose your data. The backup of your data is your responsibility.

    I am a newbie to the android development, so please be patient with fixes and releases; and your help and advice will be appreciated.

    Finally: If you cannot donate, then Click Thanks if you appreciate the build, and all works.


    The new thread for the kernel is HERE

    I have tested an upgrade myself to these releases myself, and have not encountered any problems. But everyones setup is different, the upgrade process may work for you. But would recommend to do a NAND backup before you do. FINALLY, I will not be held responsible if you lose any data.

    If you experience any boot loops, then expect at least 2, please report if you do get this, and what was your process, so that I can understand where the problem is happening.

    DFT releases have been only included for experimental purposes, I will not guarantee that this works.


    The build of this ROM is available here, If anyone wants to have play with this build, then feel free to checkout the repository by running the following command in Linux. This will grab the whole repository onto your machine.

    Code:
    git clone http://git.gitorious.org/android-leo-revolution/revolution-hd.git

    1. Revolution HD 1.4 Super Light NAND CWM MAGLDR, Click or scan the image


    2. Revolution HD 1.4 Super Light NAND CWM cLK, Click or scan the image


    3. Revolution HD v1.4 Super Light NAND DFT (flashable via MAGLDR) MAGLDR 1.13 required
    4. Revolution HD v1.4 Super Light NAND cLK (flashable via cLK using fastboot) cLK 1.3.1 required, attached in this post

    5. Revolution HD v2.6 NAND CWM MAGLDR, Click or scan the image


    6. Revolution HD v2.6 NAND CWM cLK, Click or scan the image


    7. Revolution HD v2.6 NAND DFT (flashable via MAGLDR) MAGLDR 1.13 required
    8. Revolution HD v2.6 NAND cLK (flashable via cLK using fastboot) cLK 1.3.1 required, attached in this post


    1. Revolution HD 1.4.2 Super Light NAND CWM MAGLDR, Click or scan the image


    2. Revolution HD 1.4.2 Super Light NAND CWM cLK, Click or scan the image


    3. Revolution HD 2.6.2 NAND CWM MAGLDR, Click or scan the image


    4. Revolution HD 2.6.2 NAND CWM cLK, Click or scan the image




    1. ClockworkMod HowTo
    2. cLK howto


    This file needs to go onto your FAT32/vfat partition of the SD card

    ppp_mode - set PPP or not, valid values 1 or 0 (not for cLK)
    gps_zone - zone from pool.ntp.org, values may be uk, us, europe etc... check pool.ntp.org, for all possible values
    a2sd_mode - set which a2sd mode you want, possible values, apps, dalvik, data (dalvik is default)
    - a2sd - app and app-private
    - dalvik - app, app-private and dalvik-cache
    - data - app, app-private, dalvik-cache and data
    - none - none of the above

    example config
    Code:
    ppp_mode=1
    gps_zone=uk
    a2sd_mode=data


    • Download the attached cLK1.3.3_system_300M_arif-ali.zip or cLK1.3.3_system_250M_arif-ali.zip for SL
    • turn phone on with volume down key, so that it is in SPL
    • install cLK by double-clicking CustomRUU.exe
    • To install recovery download the correct one from post #2 of cLK thread (link above)
    • reboot phone into fastboot by keeping the back key pressed
    • flash recovery by running "fastboot flash recovery recovery.img"

    How To SL1.4.2 & 2.6.2 (CWM - MAGLDR)

    1. Make sure you have partitioned the SD card correctly (ext partition, and a vfat partition)
    2. Make sure you have followed the ClockWorkMod Howto to add the recovery to the phone (see links in the thanks/credits section)
    3. Download the link above and put it into the vfat partition, maybe in a folder called ROMS
    4. Boot phone into MAGLDR by holding on the Red button/close call
    5. Select AD Recovery (Option 8)
    6. Select Install zip from sdcard
    7. Select choose zip from sdcard
    8. Select the ROM from the SD
    9. Select Yes to install the zip
    10. reboot the phone and enjoy

    How To SL1.4.2 & 2.6.2 (CWM - cLK)

    1. Make sure you have partitioned the SD card correctly (ext partition, and a vfat partition)
    2. Download the link above and put it into the vfat partition, maybe in a folder called ROMS
    3. Boot phone into fastboot by pressing the back key
    4. flash the recovery using "fastboot flash recovery recovery.img"
    5. reboot phone into cLK recovery by holding on the Home key
    6. Select Install zip from sdcard
    7. Select choose zip from sdcard
    8. Select the ROM from the SD
    9. Select Yes to install the zip
    10. reboot the phone and enjoy

    How To SL1.4 & 2.6 (DFT)

    MAGLDR 1.13 is now required

    1. Connect phone to computer
    2. Reboot phone and press hold the Red (on/off) button, until you get into the MAGLDR menu
    3. Select USB Flasher
    4. Start the DAF.exe application, and press Next until it tries to flash
    5. press green button (call) button on the phone
    6. This will now flash the phone and reboot

    How To SL1.4 & 2.6 (cLK - fastboot)

    1. Connect phone to computer
    2. Reboot phone and press hold the back key, until you get into fastboot
    3. Run "fastboot flash boot boot.img"
    4. Run "fastboot flash system system.img"
    5. Run "fastboot flash userdata data.img"
    6. Run "fastboot reboot"
    7. This will reboot phone, enjoy!!!

    By default app, app-private and dalvik-cache are on the SD card, if you need any other option, then follow the below instructions on what you want

    • data2sd
      Code:
      adb shell a2sd datasd
    • no dalvik on sd
      Code:
      adb shell a2sd nocache
    • remove a2sd completely
      Code:
      adb shell a2sd remove


    After booting into the phone, you need to create the following file on your sdcard, and reboot the phone. Hopefully after this, your phone should work.

    Code:
    /sdcard/clockworkmod/.settings

    with the following contents

    Code:
    {"is_clockworkmod":true,"current_recovery_version":"3.0.1.9","readonly_recovery":false,"recovery_timestamp":1300214577721,"flash_recovery":"flash_image recovery %s ; ","reboot_recovery":"","detected_device":"leo"}

    I will attempt to get this added in the next release


    1. make sure that any app that you do install move it back to the phone, and that will automatically reside on the SD card in the ext2/ext3/ext4 partition
    2. For the Revolution 2.6 you need at least 288 MB in /system, so for EU users you need to flash the CWM build with 300MB /system, you can change the flash.cfg from the ClockworkMod and the change it similar to
      Code:
      system ya 300M
      You can use the attached Recovery_300M.zip instead, which has the files changed, and flash using the attached file.

    • At first/second/maybe third boot You will get a message "Process system is not responding".
      FIX: press the volume up/down key wait 5 seconds, and it will continue to start
    • Occasional low volume

    To Do List / Work in-progress
    v2.7 & v1.5
    • Fix AudioFlinger Issue
    • re-do init process so that config.txt is read from SD card (only works with MAGLDR)
      • a2sd mode (apps, dalvik, data) - part 2
    • Add Stock Theme Option

    11
    Screenshots

    Screenshots in attachements
    5
    Changelog

    Common ChangeLog
    Code:
    [B]v1.4.2 and v2.6.2[/B] (22/03/2011)
    * new kernel AA 0.5 (see kernel thread for details)
    * support for ROM Manager if using cLK
    * Add latest ROM Manager to cLK build
    * Update to cLK 1.3.3
    * cache moved to mtd cache
    * Update gmail, youtube, ES Explorer apks
    
    [B]v1.4.1 and v2.6.1[/B] (11/03/2011)
    
    * fix config.txt default value for a2sd_mode to be dalvik (caused issues if no value in config.txt)
    * add config.txt support for cLK (excluding ppp_mode)
    
    [B]v1.4 and v2.6[/B] (6/03/2011)
    
    * fixed bug with upgrade and a2sd
    * upgrade kernel to 0.3 (see changelog below for details)
    * able to change settings dynamically using config.txt (MAGLDR only)
        * gps zone
        * ppp/rmnet
        * a2sd mode (apps, dalvik, data)
    * Add PPP support (to use with cLK)
    * fix bugs with PPP
    
    [B]v1.3 and v2.5[/B] (18/02/2011)
    
    * fixed a bug with a2sd+
      - now upgrade should work without any problems
      - switching between 2.5 and 1.3 shouldn't be a problem now
      - if data2sd is enabled, then this won't get ruined
    * update kernel so that it contains the latest patches from (http://gitorious.org/linux-on-wince-htc/linux_on_wince_htc)
      - merge MDJ kernel with current tree
      - kernel-aa-0.2
    
    [B]v1.2 and v2.4[/B] (06/02/2011)
    
    * Fixed root issue
    * reverted to dtapps2sd-2.7.5.3-beta04 (credit to tkirton)
      - app
      - app-private
      - dalvik-cache
    * added ES Explorer
    
    [B]v1.1 and 2.3 [/B](19/01/11)
    
    * S10.4 OC kernel included
    * Loading of the relevant modules correctly
    * Add apps2sd+
    * Fixed data network issue
    
    [B]v1.0 and 2.2[/B](16/01/11)
    
    * Unsquashed
    * Initial Release

    Revolution HD
    Code:
    [B]v2.4.1[/B] (09/02/2011)
    
    * Fixed apps2sd issue
    * removed bootanimation.zip
    
    [B]v2.4[/B] (07/02/2011)
    
    * added Talk

    Previous Changelogs (MDJ)

    Code:
    [b]v2.2[/b]
    - Squashed apps & framework for more userspace
    - Removed some media stuff
    
    [b]v2.1[/b]
    - Now for all Leo versions (LEO512 & LEO1024)
    - New method (only system.img)
    - Newest kernel MDJ S9.1 OC
    - Fixed root permissions (Superuser)
    - Fixed Market
    - Removed some gapps (Talk, Facebook, Twitter, Maps, etc) (you can install it from market)
    - Removed some wallpapers
    - Removed some themes
    - Others fixes/tweaks/changes
    
    [b]v2.0[/b]
    - Initial NAND release
    
    [b]v1.0 Super Light[/b]
    * Initial Release
    * Removed 80% HTC Sense
    * Newest kernel MDJ S9.2 OC
    5
    Rom Update

    The ROM has been updated

    check changelog for details, and read OP again for more details

    Any issues please report in this thread

    thanks for everyones support on this ROM, more than 4000 downloads in 10 days :)

    Finally, don't forget to click THANKS!!!

    Edit:

    Just so that you know,

    I do use this same ROM, it works really well for me, I have done as much testing as I can, but I still cannot test everything, as I don't use everything. If you have problems, it could be that I have not tested that particular feature, please report your problems
    2
    Talk.apk

    Dear arif-ali, :)

    Please attach this talk.apk on your the first post... I guess, somebody might need this...

    http://xdaforums.com/attachment.php?attachmentid=482517&d=1294361579

    Original thread...
    http://xdaforums.com/showthread.php?t=902609