• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[DISCONTINUED][KERNEL][PLK-L01][SABERMOD v4.9.4] DigiKernel v1.2

Search This thread

a.popat24

New member
Sep 18, 2016
2
3
Hey, I have had the honor 7 for nearly a year now and I love the phone, just not the software! If you guys are able to make a cm13 build compatible with the honor 7, i think you will make a lot of people happy! any idea how long it will take?
thanks for your efforts guys, once its released and working properly, i am happy to donate to you
 
  • Like
Reactions: DigiGoon

zinko_pt

Senior Member
Dec 26, 2006
1,271
206
Manchester
Hey, I have had the honor 7 for nearly a year now and I love the phone, just not the software! If you guys are able to make a cm13 build compatible with the honor 7, i think you will make a lot of people happy! any idea how long it will take?
thanks for your efforts guys, once its released and working properly, i am happy to donate to you
That request was already made and there's developers already working on that ;)
 

SkilesAwaRz

Senior Member
Jan 24, 2016
206
41
I'm sorry to inform all the DigiKernel users that DigiKernel v1.2 is the last kernel release from my side.
The development and support for DigiKernel is now stopped.
It was a good experience with Honor 7's development.
:)
Oh sad info... Do you also change your phone or just the development ? And what about cm, do you stop it too?

Envoyé de mon PLK-L01 en utilisant Tapatalk
 

HonorCasper

Senior Member
Apr 2, 2016
704
145
Gilleleje
Oh sad info... Do you also change your phone or just the development ? And what about cm, do you stop it too?

Envoyé de mon PLK-L01 en utilisant Tapatalk
Sad to hear mate, but understandable [emoji18] thanks for all your great work[emoji122]

Sent from my PLK-L01 using XDA-Developers mobile app

---------- Post added at 07:09 AM ---------- Previous post was at 06:34 AM ----------

Yes, I will be focusing on Honor 8, and CM is dropped from my side. :)
Not up yet?[emoji18]

Sent from my PLK-L01 using XDA-Developers mobile app
 
  • Like
Reactions: DigiGoon

holger80

New member
Aug 13, 2014
1
0
Can you give a short introduction how to compile your github sources with sabermod and how to create a boot.img? This would be great. Is your init.d script also on github?

Gesendet von meinem PLK-L01 mit Tapatalk
 

Top Liked Posts

  • There are no posts matching your filters.
  • 6
    @non-toxic : Thanks for your kind words, first of all please read the OP carefully, since you didn't let me show you a part of it.
    FEATURES

    • Updated to 3.10.101.
    • Ready for root.
    • SELinux set to permissive.
    • Compiled with SaberMod v4.9.4 toolchain.
    • Used config of B370.
    Do you see here if I have written that I have "modded" the kernel in any way? And If you are talking about the features of what changes when you update the kernel from 3.10.86 to 3.10.101 then you should check it yourself on https://www.kernel.org/ as everyone knows where the changelogs of Linux kernels lies, and they are pretty much large so the developers don't post it on a thread. And @paulobrien compiled MCK with Uber Toolchain, which is known for its battery optimized features, and I compiled DigiKernel with SaberMod toolchain which is known for it's snappiness and fast performance. But I think you misunderstood the name of the toolchain "SaberMod" as a "mod" feature in the kernel well, SaberMod 4.9.4 is a name of a toolchain which is used for compiling the whole Android ROMs or Kernels.
    And the description is quite similar to MCK because first developers doesn't load any kernel with high features, first they just try to compile it and edit the source with some added features only, if you want to know what I did in order to boot it in SELinux as Permissive mode, and how to make it ready for root then here it is (I hope you really understand all this stuff):

    To make it ready for root:
    • Decompile your kernel.
    • You'll find a folder called ramdisk.
    • Go in there and open file called default.prop.
    • And edit/add below lines:
      Code:
      ro.secure=0 [b](IMPORTANT!)[/b]
      ro.debuggable=1
      ro.adb.secure=0
      persist.service.adb.enable=1
      ro.allow.mock.location=1

    To boot in SELinux as Permissive mode
    • Put this line at the kernel command line(CMDLINE).
      Code:
      androidboot.selinux=permissive

    And once again, remember SaberMOD is a name of a toolchain and not a mod :D
    5
    DigiKernel

    H6vehEO.png


    FEATURES

    • Updated to 3.10.101.
    • Ready for root.
    • Full init.d support.
    • SELinux set to permissive.
    • Compiled with SaberMod v4.9.4 toolchain.
    • Used config of B371.
    • As reported by @Speedo.thc here AnTuTu Score of 56K+.

    INSTALLATION
    1. Download "DigiKernel" from the link.
    2. Put it in your External SDcard.
    3. Boot into latest TWRP recovery. (If you don't have, download it from here thanks to paulobrien)
    4. Go to Install, select "DigiKernelvx.zip" and flash.
    5. ENJOY!


    CHANGELOGS & BUGS
    v1.2 - 21 Sep 2016
    • Used patched boot.img of B380.

    v1.1 - 26 Aug 2016
    • ADB RSA dialog not popping up issue fixed.
    • Init.d support added, thanks to @Speedo.thc for his short & sweet script. :)

    v1 - 23 Aug 2016
    • Initial release.
    • BUG:ADB RSA dialog doesn't pop up on an unauthorized PC.


    DOWNLOADS


    YOU CAN COPY THIS THREAD TO ANY FORUM AND USE MY KERNEL ANYWHERE :), JUST GIVE PROPER CREDITS AND DON'T MIRROR THE DOWNLOADS.
    4
    So are you telling us that you are working on a cm13 build? You could be my hero!

    I'm not alone, there are other developers too, working with me, like @vardan1987777. :D :)
    3
    Hey Guys,
    Tested the battery of the latest DigiKernel 1.2 on B380(Stock) and compared it to the stock Kernel's battery drain. I charged my phone to 100% on both tests and used it before i went to sleep. I will also showcase the standby time while i was asleep(remember i used the phone for while after it was charged to 100% and watched a couple of videos that's what that big usage at the beginning is)
    Here were my results:
    *everyone's usage may differ due to different apps used and how you use the phone

    Stock Kernel: This was through pretty light use (hence the 17 hour 12minutes usage) (facebooking and browsing the web occasionally)

    As you can see the battery drain on standby was quite bad it drained around 12%.
    Only around 3 hours and 32 minutes which is pretty bad in my opinion.
    Once i started to use it more heavily the battery % dropped quite a lot.

    DigiKernel 1.2: Used the phone more on this day watched videos and went on social media for the most part (15 hour 21 minutes)

    Battery drain on standby was much better on the DigiKernel only lost around 6% to 7%.
    I managed a decent 4 hour 25 minutes of screen time compared to almost an hour less on the stock kernel

    Great Kernel @DigiGoon Loving the battery life and the performance
    3
    Hey, I have had the honor 7 for nearly a year now and I love the phone, just not the software! If you guys are able to make a cm13 build compatible with the honor 7, i think you will make a lot of people happy! any idea how long it will take?
    thanks for your efforts guys, once its released and working properly, i am happy to donate to you
    That request was already made and there's developers already working on that ;)