[Discontinued] Negalite HW+ Kernel | Performance/Battery | 6/7/17

[negamann303]

Welcome To NegaLite HW+ Kernel!!!
I AM NOT RESPONSIBLE FOR ANY DAMAGES! Use At Your Own Risk!
This Also Voids Your Warranty!

Features:
F2FS Support(Module) - Big Thanks To r3pwn
GCC Uber 4.9.4 Toolchain
-o3 Optimized
Turbo 4x Zram(Module)
msm_hotplug
All Governors Boosted
CPU OC Up To 1.3 Ghz
GPU OC Up To 533MHz
FSB UC To 320MHz
Undervolted - 25mv Lower
All Cores Active
init.d Support
Configurable Tweak Scripts
Sysctl Tweaks
Memory Tweaks
Build.prop Tweaks
Busybox 1.27.0 Included
ADB Debugging Auto Enabled
Auto-Root Included
Kernel Adiutor 4 Wear App Included
Scripts Included In Source For Simple Compiling(Build The Kernel Yourself If You Want)

Custom Governors:
Darkness, Intelliactive, Intellidemand, InteractiveX, PegasusQ, Smartmax, ThunderX

Custom Schedulers:
VR, SIO, FIOPS, FIFO And ZEN

------------------------------------------------------------------------------------------------------------------------------

​

Downloads:
Nothing Needs To Be Done Prior To Flashing!!!
Just Do This:
1. Push Zip To /sdcard/ Via ADB
2. Flash zip In Recovery
3. Done (Enjoy!)

WEAR 1.5(Marshmallow)
negalite_kernel_HW_7eca452-1.5.zip - 1/12/2017

WEAR 2.0(Nougat) - Official Release Compatible
negalite_kernel_HW_dffc4c0-2.0.zip - 6/7/2017

Commit Log:
https://github.com/Negamann303/Huawei-W-1.5-2.0/commits/master
------------------------------------------------------------------------------------------------------------------------------
Source: Huawei-W-1.5-2.0
​

 

[negamann303]

Boot Battery/Performance!!!

Advanced Users: (Optional)
You Can Have Pre-Configured Settings On Kernel Flash

Download One Of The Zips Below
Rename To bootperf.zip
Push To Your SDcard
Flash The Latest Kernel
Enjoy!

Nega's Tweaks:
battery_v6_bootperf.zip - Battery Save - 8/03/2016
performance_v6_bootperf.zip - Performance(See What This BadBoy Can Do!) - 8/03/2016

PablosMule_bootperf.zip - Pablo71 Has You Covered, Make Sure To Thank Him!

On The Fly Config Switching

Push bootperf.zip And The Flasher.zip Below To SDCard And Use Flasher In Recovery

BootPerf_Flasher.zip





​

 

[bmg1001]

Download link doesn't seem to be working...

 

[negamann303]

Download link doesn't seem to be working...

Fixed, thanks

 

[janjan]

Thanks for your efforts. Link is broken bro.
Huawei-Watch-3.10-mr1 is it lollipop-wear-release-1?

 

[negamann303]

Thanks for your efforts. Link is broken bro.
Huawei-Watch-3.10-mr1 is it lollipop-wear-release-1?

It should be fixed. This kernel is for Marshmallow

 

[Faspaiso]

This seems interesting. Could you explain how I move .zip files to and from Wear?

I'm rooted with TWRP on wear, but got no USB mount. How do I then move the files?

Thanks in advance

---------- Post added at 08:57 AM ---------- Previous post was at 08:32 AM ----------

Trying the pull command, but saying it's read only

 

[bmg1001]

This seems interesting. Could you explain how I move .zip files to and from Wear?

I'm rooted with TWRP on wear, but got no USB mount. How do I then move the files?

Thanks in advance

---------- Post added at 08:57 AM ---------- Previous post was at 08:32 AM ----------

Trying the pull command, but saying it's read only

Worked here. This is the exact command I used: adb push C:\Users\bmg10\Downloads\negalite_kernel_HW_r99c9f93.zip /sdcard/

Did you set TWRP to allow system modifications?

 

[Faspaiso]

Worked here. This is the exact command I used: adb push C:\Users\bmg10\Downloads\negalite_kernel_HW_r99c9f93.zip /sdcard/

Did you set TWRP to allow system modifications?

Was just pushing from standard ADB. Not in TWRP. Suddenly it worked. But thanks

 

[pablo71]

I currently run skin1980's MM kernel ... can I just flash this over it out should I wipe everything? thanks this looks awesome

 

[negamann303]

I currently run skin1980's MM kernel ... can I just flash this over it out should I wipe everything? thanks this looks awesome

No prerequisites, just flash

Sent from my SM-G935P using Tapatalk

 

[pablo71]

No prerequisites, just flash

awesome ... zip file loaded to sdcard and rebooting to recovery to flash here we go ... thanks

 

[bmg1001]

So far so good! Watch is running really fast and smooth and battery seems to be a bit better than what I got on Skin's kernel, but that might also be cause I factory reset my device when I flashed the kernel (since I was running Skin's kernel before). No issues like random reboots or crashes either. I haven't modified any kernel settings yet though.

 

[yugendreams]

Holy sh!t

Thanks!

This is the smoothest experience I have had on this watch so far and I've used all of the things!

 

[pablo71]

loving this kernel to a high degree so far ... it was damn thoughtful of you to include kernel adiutor and make it flashable in recovery. the selection of governors, hotplug profiles and i/o schedulers is top notch (I'm no expert on these matters though I know just a small amount)

Early observations: on your stock settings both my watches don't like waking up on tilt to wake, they usually require a double-tilt to wake up and one watch even locked up and required a reboot BUT adjusting some settings fixed this instantly. I point out though that I did not do a factory reset or wipe any partitions or caches before installing this kernel. I just flashed and started having fun.

currently I'm getting VERY satisfactory performance with the cpu's frequency locked at 787mhz + interactiveX governor + intelliplug's eco-conservative profile + gpu freq max 320mhz with powersave governor + row i/o scheduler with 1024kb read ahead

so far this kernel is badass

 

[Pkt_Lnt]

loving this kernel to a high degree so far ...

I was wondering if all the Wear Shell and Tasker commands worked, sine I did not see that it was rooted. Thanks.

 

[pmgnet]

With the zram, should we see a reported higher amount of total ram available? What are others seeing?

Sent from my LG-D800 using Tapatalk

 

[eduardozeassesme]

Sweet kernel need this for Android Wear 2.0 please dev

 

[negamann303]

With the zram, should we see a reported higher amount of total ram available? What are others seeing?

Sent from my LG-D800 using Tapatalk

Thanks for making me realize zram wasn't enabled, will be in the next release tonight

Sweet kernel need this for Android Wear 2.0 please dev

Once wear 2.0 is released, I will move up

Sent from my SM-G935P using Tapatalk

 

[quantan]

loving this kernel to a high degree so far ... it was damn thoughtful of you to include kernel adiutor and make it flashable in recovery. the selection of governors, hotplug profiles and i/o schedulers is top notch (I'm no expert on these matters though I know just a small amount)

Early observations: on your stock settings both my watches don't like waking up on tilt to wake, they usually require a double-tilt to wake up and one watch even locked up and required a reboot BUT adjusting some settings fixed this instantly. I point out though that I did not do a factory reset or wipe any partitions or caches before installing this kernel. I just flashed and started having fun.

currently I'm getting VERY satisfactory performance with the cpu's frequency locked at 787mhz + interactiveX governor + intelliplug's eco-conservative profile + gpu freq max 320mhz with powersave governor + row i/o scheduler with 1024kb read ahead

so far this kernel is badass

How can you get your watch rooted? I tried flash some supersu for wear but I cannot start the kernel adiutor.