Check if you have SM-T560 and not SM-T560NU. If you have SM-T560NU you can install LineageOS 18.1 Android 11.
[Discontinued] PORT ROM 7.1.2[T-560] & [T-561] ViperOS V5.1 for Galaxy tab E
- Thread starter gitanillo87
- Start date
1-2 hours have passed
But it is still stuck on this page
It is still being launched
It is still booting
(I am Have T561)
Video : https://s24.picofile.com/file/8451339034/MOV01456.mp4.html
In one word:
Finally, I tried to install Android 7.1.2, but I said above my problem
It seems that these 4 (LinaegeOS - ViperOS - AOKP - dotOS) ROMs are defective and have problems
But Android ROM 6.0.1. 5.1.1 was installed and booted without any problems
I think there is a problem with the kernel ROM
And it is possible that the kernel of 4 (LinaegeOS - ViperOS - AOKP - dotOS) ROMs is the same and it has a problem with the t561 model
But it is still stuck on this page
It is still being launched
It is still booting
(I am Have T561)
Video : https://s24.picofile.com/file/8451339034/MOV01456.mp4.html
In one word:
Finally, I tried to install Android 7.1.2, but I said above my problem
It seems that these 4 (LinaegeOS - ViperOS - AOKP - dotOS) ROMs are defective and have problems
But Android ROM 6.0.1. 5.1.1 was installed and booted without any problems
I think there is a problem with the kernel ROM
And it is possible that the kernel of 4 (LinaegeOS - ViperOS - AOKP - dotOS) ROMs is the same and it has a problem with the t561 model
Hello, I hope someone can help me out here.
I received a SM T-560.
The tablet stays on the logo screen with a red exclamation mark on the top left.
I can get in the custom os dowloading screen with holding the power, volume down, home button.
Cannot flash with Odin because my tablet is not recognized by my pc.
Cannot go in recovery mode with holding the power, volume up, home button.
Screen does not change. Stays on logo screen.
I do not know what to try next ...
Help ............
I received a SM T-560.
The tablet stays on the logo screen with a red exclamation mark on the top left.
I can get in the custom os dowloading screen with holding the power, volume down, home button.
Cannot flash with Odin because my tablet is not recognized by my pc.
Cannot go in recovery mode with holding the power, volume up, home button.
Screen does not change. Stays on logo screen.
I do not know what to try next ...
Help ............
First method, nothing. Power + volume down: goes out for 2 seconds and then the logo-screen comes back.
My main problem is to get the tablet recognized by the PC. Tried different drivers, other internet solutions, ... When I can get the device show up in Windows, then I can flash again.
My main problem is to get the tablet recognized by the PC. Tried different drivers, other internet solutions, ... When I can get the device show up in Windows, then I can flash again.
Try using a different USB port on your computer and make sure the device is connected directly to that USB port. Do not use a USB hub or a USB extension cable. Use another USB cable to make sure the cable is not damaged.
or or completely empty the battery of your tablet and recharge it and try holding the power, volume down home button again
or or completely empty the battery of your tablet and recharge it and try holding the power, volume down home button again
Last edited:
Good afternoon,
Samsung left this tablet stuck with kitkat. The problem is that some apps in the google playstore won't be available for install because of this. (in my case the "cafeyn" app, to read french press)
I've flashed this rom on my old T-560 following the instructions.
- Proper TWRP with Odin
- Rom
- Pico arm gapps 7.1
Everything is working flawlessly so far, thanks a lot!
Samsung left this tablet stuck with kitkat. The problem is that some apps in the google playstore won't be available for install because of this. (in my case the "cafeyn" app, to read french press)
I've flashed this rom on my old T-560 following the instructions.
- Proper TWRP with Odin
- Rom
- Pico arm gapps 7.1
Everything is working flawlessly so far, thanks a lot!
Last edited:
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
1
read this but I have my suspicion that you don't need it
What is Magisk | Everything you need to know - Magisk
A complete guide which explains what is magisk...
themagisk.com
1
Thanks and you are right, I dontread this but I have my suspicion that you don't need it
What is Magisk | Everything you need to know - Magisk
A complete guide which explains what is magisk...
themagisk.com
-
40clarification
this is a port rom, so it is likely that when you connect the device to the PC or via bluetooth it shows a different model, it is normal since it is a hybrid between the original rom and the port
the rom it on beta state so please report any problem
I'm not a developer, I only have some general knowledge, and experience porting rom, but I don't even have Linux installed
I leave the link of the original rom of the g360h that has almost the same hardware as the tab e, all the recognition for the creators of it
https://forum.xda-developers.com/ga...t/viperos-7-1-2-python-v2-0-sm-g360h-t3691972
DISCLAIMER:
We are not responsible for anything that may happen to your phone as a result of installing custom roms and/or kernels. you do so at your own risk and take the responsibility upon yourself.
"This is a user friendly thread. All feature requests will be heard and considered. I am not against anything that doesn't stray too far away from the original idea of the ROM! Helping one another is also encouraged! Please be respectful and you will always be treated the same way, we are all here for a good experience."
ABOUT:
We are a Brazilian team, ViperOS aims to bring stability and useful features. If you are looking for a stable ROM with true tested features, minimal bugs and no Lineage bloatwares, then this is the place to be.
Features:
STATUSBAR
LOCKSCREEN
MULTI TASKING
SYSTEM
Many other customizations, install and take a look
-INSTALLATION INSTRUCTIONS-
- Download the rom
V5.1 fot T560
https://drive.google.com/open?id=18wn_G8cLHwK5F2lXENtnO_pMrh4HV5N2
V5.1 for T561
https://drive.google.com/open?id=1N6KLx73rXoJRw3pD_dkCawOHfIlJKHY6
- Download Gapps
https://opengapps.org/
- Take a nandroid backup
- Full wipe factory reset
- Flash ROM
- Flash Gapps
- Flash Magisk(optional)
- Reboot.
- Enjoy!
BUGS
-Offline charge
-wifi hotspotFixed?
-screen mirror
-bluetooth conecting to speakersFixed?
FAQ
-My tab stuck on bootloop after flash rom why?
Be sure you are using T560 or T561 device,other tabs are not compatible
-brightness control dont work why?
Go to quick setting and in the screen of the edit toggles, add brightness toggle, and switch brightness from automatic to manual... Then can control manually the brightness And we need to remember to do not touch the icon "A" at the brightness toggle
-how to disable double tap to wake(dt2w)from better battery performance?
you need root,use magisk or supersu,later, download smartPack from play store grant permisions, go to Wake Gestures tap on disable and check apply on boot,and reboot
-When i connect bluetooth and wifi at the same time wifi runs slow why?
its a knowed bug,try to solve changing the wifi 2.4 channel,and conect fist the bluetooth device and after,turn on the wifi
-Offline charging seems not work why?
Its a knowed bug,offline charge works but not shows anything on screen(black screen)
OLDER VERSIONS
Changelog
v5
-Adjust dpi(all rom now sees like a tab)
-Some improvement on kernel to make more stable system(apps not crash)
-Added some binary stock 4.4.4 file to try to improve wifi and bluetooth problems
v5.1
-back to old kernel,seems more stable
-added tab s2 fingerprint,now safety net pass basic integrity check by default
-added some libs to adjust screen sensibility4Time to say bye, i sold tab e and now i am fighting with a huawei media pad m5 lite,thanks to all the comunity, good bye4I will stay with your rom in my Tab E until it says goodbye !
Thank you for great work !3Posible battery drain fix?
founded something interesting,the power_profile.xml under framework-res the file is that of the source ROM battery shows 2000 mha and not 5000mha maybe it is the reason for unestable battery i recompile framework with modded power_profile.xml just flash the zip an tell
https://drive.google.com/file/d/1DTVlLdl6di5CncnxJPN4xV5gQLFKlcPJ/view?usp=sharing3
