[CLOSED][DISCONTINUED][RECOVERY][OFFICIAL] TWRP for Galaxy Tab S6 Lite
- Thread starter Linux4
- Start date
- Status
You made the automatic reboot?
Make this out
After the flash press power and volume down ; when the display is off, immediately power and volume up
---------- Post added at 10:24 AM ---------- Previous post was at 10:22 AM ----------
Have you used Wipe?
Flash lineage os
Could I have help please?
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 67 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Yes, the bootloader is unlocked.
Are you sure???
After the "unlock" did you restart the system and went into the developer settings?
I fixed it. Download mode said “prenormal”. I remember from the Tab A from 2019, you had to set the tablet as new and look for a software update to be able to flash custom files.
hey guys i have trouble installing the twrp
samsung driver are installed
odin lated downloaded
the twrp named to recovery.img and 7z --> to recovery.img.tar
then it stuck at
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 67 M
<ID:0/004> SetupConnection..
can someone help
samsung driver are installed
odin lated downloaded
the twrp named to recovery.img and 7z --> to recovery.img.tar
then it stuck at
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 67 M
<ID:0/004> SetupConnection..
can someone help
I cannot boot into TWRP through adb, is it normal according to the above statement?
I do not know why the device is detected in adb ("fastboot devices") but I cannot boot into TWRP or even reboot through commands "fastboot reboot", is something wrong with my Tab S6 Lite Wifi?
Thank you in advance
Fastboot doesn't work on Samsung devices (I know there's a very limited fastboot in bootloader on new samsung devices but it doesn't accept any commands!)
Use Odin or Heimdall like described in FAQ
Also fastboot and adb are completely different things ... seems like you mixed it up (I believe you meant fastboot and not adb, right?)
I did all stuff until step 2, this to a galaxy tab s6 lite SM-P610, but I had a problem at the moment of flash TWRP using odin. The process ended in error:
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1303)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 67 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and the tablet says: 'Only official released binaries are allowed to be flashed(RECOVERY)'.
I searched for other versions, but I didnt succeed.
Please help me, I'll be very greatful.
Last edited:
Your bootloader is still locked,
follow the instructions to unlock it (looks like you didn't exactly follow them, probably you skipped the step with checking if OEM unlock is still enabled but it's required).
It is a shame that Samsung removes the fastboot commands, it is very useful through adb.
Is there any way to boot into TWRP without flashing TWRP? I was trying to launch TWRP on my Tab S6 Lite.
Thank you!
You need to flash it, there's no equivalent to 'fastboot boot' with Odin/Heimdall.
I already unlocked the bootloader. I went to the 'download mode' and press 'up volume' for long time until tablet restarts, that erased all data. And at the 'download mode' , the label 'OEM Iock' says Off.
by the way, when I tried without unlocking the OEM, the tablet would not let me install the TWRP and it said: 'installation blocked by OEM'. But now just says what I put in the lost post
do I need to do unlock of bootloader another time or something else? and thank you thank you for reply.
Last edited:
Check the instructions ... You aren't done after unlocking using volume up, it's actually still locked!
At the developer options the 'OEM unlock' option is enabled and won't let me disable it.
Doesn't that mean it's unlocked?
- Status
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
9
Code:/* * Your warranty is now void. * * We are not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at us for messing up your device, we will laugh at you. */
FEATURES
- MTP and ADB support
- EXT4 support
- F2FS support
- EXFAT support
KNOWN ISSUES
- Data decryption unsupported
- adb sideload does not work
DOWNLOAD
- Not available anymore
Contributors
Linux4
Source Code: https://github.com/TeamWin2FAQ
How to boot into Download mode
- Turn off the tablet
- Press and hold volume down and volume up
- Connect the tablet to a computer via USB cable
How to boot in recovery mode
- Turn off the tablet
- Press and hold volume up and power until bootloader logo appears
How to flash TWRP
- Unlock the tablet's bootloader
- Backup all your data as unlocking will factory reset your tablet!
- Enable developer options and enable OEM unlock option there
- Boot into download mode (you have to do it like described above, with adb reboot download the unlock option won't be available!)
- Long press volume up to unlock your device
- Go through initial setup again after unlock. You must connect to WiFi but can skip everything else.
- Confirm that bootloader is actually unlocked (OEM unlock option grayed out and telling you it's already unlocked in developer options)
- Boot into download mode
- Flash twrp.img.tar (or twrp.img if you use heimdall) from TWRP download page using Odin/Heimdall.
2
You have to rename the twrp.img to recovery.img and add it to a .tar archive using e.g 7zip, I'll also add that to the FAQ2
I'd like to add that (though only for AOSP FBE, not Samsung's encryption on stock) and already experimented a bit with it but it's still not working correctly.
