[discontinued][ROM][10.0][UNOFFICIAL]Resurrection Remix v8.6.x [MotoZ2Play][Albus]

[HeltonMax]

Resurrection Remix Q

/*

* Your warranty is now void.

*

* I am not responsible for bricked devices, dead SD cards,

* thermonuclear war, or you getting fired because the alarm app failed. Please

* do some research if you have any concerns about features included in this ROM

* before flashing it! YOU are choosing to make these modifications, and if

* you point the finger at me for messing up your device, I will laugh at you.

*/

Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome

combination of performance, customization, power and the most new features, brought directly to your Device.



Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!

Special thanks to, the LineageOS team, Omni team , SlimRoms and of course to all the supporters.

Particularity to work the gestures in digital, thanks @kontemp

Do the same as in the video, in the initial setup
Make sure you have a custom recovery installed(TWRP is the preferred recovery)
Download the latest Resurrection Remix Rom & the latest GApps package
Boot into recovery
Perform a FULL factory wipe and wipe/system and dalvik cache as a precaution
Flash ResurrectionRemix Rom
Flash Google Apps package(Optional)
Flash Magisk Root(Optional)
First boot may take up to 10 minutes.

Stock ROM required
ROM Download
GApps

Resurrection Remix Source
Device Source
Kernel Source

XDA Developers
LineageOs Team
Omni Team
And Of Course To All The Supporters, Donators And Users

If you have a major bug to report that has not been reported already, please take the following steps to report it to us. It will save you, Team Resurrection Remix and me quite some time.

Download the Catlog app from the Play Store.
There is also a donate version which you can purchase to show appreciation.
After downloading the Catlog app, go to the app settings, and change the log level to Debug.
Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into Catlog and stop the log recording.
Copy and paste the entire log either to Hastebin or Pastebin
Save the log, and copy and paste the link into the thread with a brief description of the error.

​

You can also join our Telegram Channels:
Global: https://t.me/z2play
Moto Z2 Play Custom ROMs group: https://t.me/Z2PlayGSI

XDAevDB Information
ResurrectionRemix Q for Z2 Play, ROM for the Motorola Z2 Play

Contributors
HeltonMax , jeangraff30
Source Code: https://github.com/ResurrectionRemix

ROM OS Version: Android 10
ROM Kernel: Linux 3.18.xx
ROM Firmware Required: ALBUS_PPS29.133-30_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml

Version Information
Status: Stable


Created 2021-01-30
Last Updated 2021-02-08

​

 

[HeltonMax]

Script for instaling Stock ROM

 

[meelten]

Interesting. Any known issues?

 

[gatsu777]

I was also interested and would like to know if there are any bugs.

 

[HeltonMax]

I was also interested and would like to know if there are any bugs.

I posted it because I didn't see any bugs, but if you show up with something you can help me fix it

 

[gatsu777]

I posted it because I didn't see any bugs, but if you show up with something you can help me fix it

I will test soon! I will definitely report any bugs that I notice, friend. Thank you for sharing this rom with us!

 

[meelten]

So is flashing stock pie required before installing this? Will not work from oreo?

 

[marcost22]

So is flashing stock pie required before installing this? Will not work from oreo?

Yes, that's why it says "Firmware required: ALBUS_PPS29.133-30 " AKA stock pie

 

[gatsu777]

I'm testing the rom and I'm finding it incredible. The only problem I found is that the fingerprint sensor gestures are not working

 

[kontemp]

JBL Mod doesn't work, unfortunately...
Despite of that - rom is great, customization level incredible. Battery consumption low, SE Linux restrictive, security update 01.2021. Nicely done!

 

[Razemix]

This looks really promising, I'll probably try it out. But I have a few questions:
1) Does encryption work?
2) As @gatsu777 mentioned, is it possible to use one-button navigation? I mean, does it come with Moto Actions at all? I know Android 10 has gesture navigation, but I'm really used to one-button nav. Also the lack of Fast torch and Quick capture would be kinda bummer.
3) Does the Always on Display (Peek display) work?
4) Do battery mods work? Can I configure it to use the efficiency mode?
5) Not a deal-breaker, but what about FM radio?

I assume basic features like bluetooth, dual SIM, USB connection, Turbo power etc. work just fine.

Thanks.

 

[kontemp]

@Razemix :

1) the option is present (Security options -> Use encryption), but I didn't use it. The system is decrypted after first boot - you will have to try it on your own;
2) yes (in Moto Actions), but it needs some additional configuration - for example when I set "swipe right" -> "last app" after swiping I got all last apps On the other hand "single tap" -> "screen on/off" works just fine. Fast torch and Quick capture are present and working - if you mean those two standard Moto Actions;
3) AoD works - after moving the phone or waving a hand over it;
4) haven't tried. JBL Snap unfortunately doesn't work, even tried two different players - the issue is somewhere in the system itself;
5) FM radio works- after plugging some cable headphones of course;
6) bluetooth OK, USB connection OK (setting default connection also), dual SIM haven't check - don't have second sim card.

It looks very, very good - for me only this JBL issue needs some correction.

Congratulations, @HeltonMax !

 

[gatsu777]

@kontemp, how did you get the gestures on the impression sensor? I called and configured the actions there in moto actions, basically: start, back and recent, but the sensor does not respond, I even disabled the fingerprint unlocking and even then it was not.

 

[kontemp]

Well, hard to say exactly how...

First of all I've used installer-pie.zip from second post above (option: "2-Installer-Complete.bat"), then formatted twice in twrp to remove encryption, then deleted everything in twrp (@marcost22, thanks for the advice!). This way I've achieved total whipe-out of old data and installed fresh stock Pie.

Second: during first startup I've disabled fingerprint at the very beginning (it can be done by choosing fingerprint+pin, then in second step choosing skip - and this way the procedure of setting fingerprint can be skipped without setting any initial data).

That's it... But this functionality acts a bit weird - like I wrote above not every "move" on fingeprint sensor is recognized correctly. Let's hope @HeltonMax will release another version with some corrections

Last thing - I use version XT1710-09, if it matters for the sake of firmware used in this rom...

Good luck!

 

[gatsu777]

@kontemp your explanation was very clear, friend! As you said it is not working perfectly, I will be satisfied with the gestures on the screen and use the unlock by fingerprint + pin. This rom is so perfect that I will really continue with it. Lots of configuration options, long battery life, and being able to them all with a black theme due to Android 10 is really cool. Thank you for your explanation and congratulations to @HeltonMax for the excellent work!

 

[HeltonMax]

Hello guys, I just saw that the post is very busy lol thanks for reporting these problems and if you can send me logs (adb logcat -b all> logcat.txt) it helps me a lot it can be right here in the post or if you prefer you can me mark in the global group @ z2play or @ Z2PlayGSI that I will try to correct these problems

 

[meelten]

System encryption doesn't work. Phone reboots and then gets stuck forever on "Encrypting" screen with "time remained 00:00". After forced restart system is unaccessible.

As for fingerprint gestures in order to set actions Back, Recent Apps and Home one need first disable Navigation bar in: Resurrection tools --> System --> Buttons. Otherwise these actions are not recognizable.

 

[Rocale]

hi guys,i've installed the rom, but no signal from network cell... some fix?

update: Fixed, i had to reinstall the android 9 and go back to RR.

SOMEONE KNOW HOW TO DISABLE THE PROXIMITY SENSOR??????

 

[Rocale]

hi guys,i've installed the rom, but no signal from network cell... some fix?

update: Fixed, i had to reinstall the android 9 and go back to RR.

SOMEONE KNOW HOW TO DISABLE THE PROXIMITY SENSOR??????

Another Problem guys, my battery dont want to charger anymore, it dont recognized the charger, i already try to reinstall the stock rom and nothing, the problem continues i think its soft brick, anyone can help? ty

 

[HeltonMax]

New build available
RROS-Q-8.6.6-20210208-albus-Unofficial.zip
Fixed most Moto Mods
Full TV motomod support will be added soon
As I have no motomod to know if it was fixed, so I need to be told if it worked or not