[Discussion & Feedback] OxygenOS 10.3.7 OTA for the OnePlus 6

Search This thread

DoktorImEinsatz

Senior Member
May 19, 2012
52
20
I suspect many of us would already have updeted to 10.3.8, since it showed up as an OTA more than a month ago.
Yes your are right. I should have been more precise. I wanted to know if the instructions on the first page are also usable for the newest version. (I'm unsure because the thread is not updated.)
 

airtower

Senior Member
Sep 9, 2010
1,052
345
Denver, CO
Yes your are right. I should have been more precise. I wanted to know if the instructions on the first page are also usable for the newest version. (I'm unsure because the thread is not updated.)

they are. until OOS 11 these updates will be mostly just security patches and other O&M. There's so little that's noteworthy, few people even bother to come in here anymore.
 
  • Like
Reactions: DoktorImEinsatz

o-l-a-v

Senior Member
Jan 6, 2012
642
515
Oslo
10.3.9: Is it just me, or does it seem like WiFi signal strength is weaker on this firmware vs. 10.3.8 for instance/ earlier versions? At least the WiFi signal indicator in title bar, which is constantly 2-3 "bars"/ levels lower than it was prior to 10.3.9.

Running stock, no root, no mods, no magisk.

I'm sitting 2-3 meters from my Nest Wifi router (AC2200), clear sight, and measured WiFi signal according to indicator in titlebar AND Ubiquiti "WiFiMan" app jumps up and down constantly.

Edit: After a reboot it seems to be back in biz.
 

Attachments

  • Screenshot_20210323-183953.jpg
    Screenshot_20210323-183953.jpg
    136.1 KB · Views: 107
Last edited:

danieleb89

Senior Member
Nov 8, 2010
194
36
anyone can tell me what's the correct way to update with magisk 22?
flashing a patched boot image should be ok, but do I have to create it or search it every time I update rom?
is there another way?
 

iElvis

Senior Member
May 24, 2012
5,021
2,835
Modville
anyone can tell me what's the correct way to update with magisk 22?
flashing a patched boot image should be ok, but do I have to create it or search it every time I update rom?
is there another way?
The "recommended" method is broken for a lot of people on OP6. When I tried it, my phone would not even get past the loading screen.

I've been using the same approach as always, even though this is "not recommended" now. It works for me:

-change magisk.apk to magisk.zip (just change the extension, nothing else needed)
-Flash OOS in twrp
-Flash recovery
-reboot recovery
-Flash Magisk
-Flash kernel (if desired)
-Reboot system
 

danieleb89

Senior Member
Nov 8, 2010
194
36
The "recommended" method is broken for a lot of people on OP6. When I tried it, my phone would not even get past the loading screen.

I've been using the same approach as always, even though this is "not recommended" now. It works for me:

-change magisk.apk to magisk.zip (just change the extension, nothing else needed)
-Flash OOS in twrp
-Flash recovery
-reboot recovery
-Flash Magisk
-Flash kernel (if desired)
-Reboot system
ok I missed the apk to zip, I didn't know it was flashable thanks 😁
 

JW19

Senior Member
Jun 16, 2018
57
20
10.3.9 has me with a black screen after unlocking my phone. I can access the notification panel but can't open settings. I have magisk 22 installed and used the same method I do for every OOS update (restore images, install update, install magisk to other slot, reboot).

edit: after 2 reboots it's working fine now
 
Last edited:

baxtex

Senior Member
Oct 16, 2011
1,047
98
I dirty flashed from 0.8 to 0.9 but now my phone is stuck on boot screen, animation loops forever. I have dirty flashed 10 times already, never had any issue.

Edit: Nevermind, retried it and now it worked as usual.
 
Last edited:

djcsurf

Senior Member
Jan 9, 2011
1,968
421
Kent
I hope someone can help, im on 9.0.9 rooted with BlackTWRP v3.0 (3.3.1-2) & Magisk 22 and want to update to 10.3.9. I did follow a guide on another thread but wasn't successful, update failed so im still on 9.0.9. Can anyone provude instruction for my scenario. TIA
 

Top Liked Posts

  • There are no posts matching your filters.
  • 12
    Stable 10.3.10 is up - Link

    Mirror to AFH - AFH

    md5 - af4faf7fa6ed18437423f3776acc124d

    Stock boot image - Stock

    Magisk patched image - Patched

    Changelog
    System:
    • Updated Android Security Patch to 2021.04
    • Fixed known issues and improved system stability
    1
    New update 10.3.10 available now.
    Bug fixes & April patches
    1
    Hey i can't seem to boot up to OOS.

    Wipe data/factory reset

    I flashed 10.3.9 with twrp.zip rebooted to recovery.

    Flashed 10.3.9 again with tarp zip and again rebooted to recovery

    Reboot to system --> the phone boots back to Twrp. Using twrp 3.5.2_9-0.

    Any idea what I might be doing wrong? After flashing to both slots the phone doesn't boot back up to the system. But doing same process I am able to flash other AOSP ROMs on top of it
    since you don't provide all the needed information to properly debug your issue I'm going to make a guess:

    switching between aosp (or any custom) ROMs and official OOS requires a formated data partition instead of wiped data partition
    1
    since you don't provide all the needed information to properly debug your issue I'm going to make a guess:

    switching between aosp (or any custom) ROMs and official OOS requires a formated data partition instead of wiped data partition
    I guess you are right. I have previously flashed AOSP ROM and wanted to move to another AOSP ROM. But for that I had to flash Oos to both the slots but when I wanted to boot into OOS I couldn't boot it back up. I did wipe factory data reset and wipe data and dalvik cache but did not format data partition. Will give it a try soon.

    Thank you Again. Much appreciated
  • 174
    3a5uOVJ.png

    Hey everyone,

    We are starting to push the incremental rollout of OxygenOS 10.3.7 for OnePlus 6.

    Changelog
    Code:
    [B]System:[/B]
     • Newly added "Hide silent notifications in status bar" feature to filter unimportant notifications, making the app notification management easier( Route: Settings>Apps & Notifications> Notifications> Advanced> Hide silent notifications in status bar )
    • Fixed the small probability issue that Screenshot may fail
    • Updated Android Security Patch to 2020.11
    • Improved system stability and fixed general bugs
    [B]Game Space:[/B]
    • Newly added gaming tools box for convenient switches of Fnatic mode. You can now choose three ways of notifications: text-only, heads up and block, just for your immersive gaming experience
    • Newly added quick reply feature in a small window for WhatsApp and INS (Enable it by swiping down from upper right/left corners of the screen in gaming mode)
    • Newly added mis-touch prevention feature. Enable it, swipe down from the top of the screen, click and the notification bar will pop out

    Explore what's new on Android 10 here.

    This OTA will have a staged rollout. The OTA will be received by a limited number of users today and will have a broader rollout in a few days after making sure there are no critical bugs. Using VPN to download this build might not work as the rollout Is not based on regions and is randomly pushed out to a limited number of devices.

    For those who were on previous versions for OnePlus 6 and OnePlus 6T, we appreciate your active feedback and for reaching out to us. With your help, we have been able to better optimize and improve several key areas. Thank you for your patience and as always, we look forward to getting your continued feedback via the Community app.

    If you don't have the Community app installed on your device, feel free to download it HERE. You can check here for more information on the integrated Feedback tool. Make sure to let us know how you feel about the build here in the thread too, we look forward to reading your feedback.

    Downloads



    Full Update

    Stock Boot Image
    • 10.3.7 boot.img: Unofficial Link
    • MD5 Hash: b0c15983c4872b3ae622dc93693c4484

    Magisk Patched Boot Image
    • 10.3.7 boot.img: Unofficial Link
    • MD5 Hash: 4774a4a9eed732a837605ea9f5af4391

    Previous Updates along with boot images:

    Custom Recoveries

    Root

    Warning: Do not flash partial update OTAs (under 1 GB) on a modified/rooted device! If you want to use partial OTAs, you must first flash the full OxygenOS zip that it applies to, and then flash the partial OTA from stock recovery. Flashing partial OTAs from TWRP will either fail or soft brick your device. You can return to a usable state by flashing one of the above full zips in recovery.



    Installation Instructions

    Download the necessary files from the section above and follow the steps below:

    Note: Dirty flashing is fine if you are running an old OxygenOS version or a ROM based on OxygenOS. If you are, however, coming from a Custom ROM, you must clean flash.

    Caution: Please remove your existing screen lock/pin/pattern/password and set it to swipe before starting the update process.



    For Non-Rooted Users with a Locked Bootloader and Stock Recovery

    1. Download the full ROM zip from the downloads section above and place it in the root of your internal memory
    2. Reboot to Stock Recovery > Shutdown device > Press Volume Down + Power buttons together
    3. Select Language > Install menu > Install from internal > Select the full zip > Flash
    4. Reboot to System
    Note: First boot may take some time, so please be patient and wait for it to boot.



    [Dirty Flash] For Users with an Unlocked Bootloader and TWRP Recovery coming from Stable OxygenOS, OxygenOS Open Beta

    1. Download the full ROM zip and TWRP recovery from the downloads section above
    2. Transfer the full ROM zip and TWRP recovery to the root of your device's internal storage
    3. Reboot to TWRP recovery and take a nandroid backup of your existing ROM
    4. From the TWRP menu, Install > Select full ROM zip > Swipe to flash
    5. From the TWRP menu, Install > Select TWRP recovery zip > Swipe to flash
    6. Reboot to TWRP recovery
    7. Flash the latest stable Magisk in case you want to root
    8. Reboot to System
    Note: First boot may take some time, so please be patient and wait for it to boot.

    Warning: Dirty flashing (update) can be risky! Remember that if you face issues after dirty flashing, you will have to clean flash.



    [Clean Flash] For Users with an Unlocked Bootloader and TWRP Recovery

    1. Download the full ROM zip and TWRP recovery from the downloads section above
    2. Transfer the full ROM zip and TWRP recovery to the root of your device's internal storage
    3. Reboot to TWRP recovery and take a nandroid backup of your existing ROM
    4. From the TWRP menu, Install > Select full ROM zip > Swipe to flash
    5. From the TWRP menu, Install > Select TWRP recovery zip > Swipe to flash
    6. Reboot to TWRP recovery
    7. From the TWRP menu, Wipe > Swipe to wipe
    8. Flash the latest stable Magisk in case you want to root
    9. Reboot to System
    Note: First boot may take some time, so please be patient and wait for it to boot.

    Never Settle.

    XDA:DevDB Information
    [Discussion & Feedback] OxygenOS 10.3.7 OTA for the OnePlus 6, ROM for the OnePlus 6

    Contributors
    Funk Wizard, Akhil701
    ROM OS Version: Android 10
    ROM Kernel: Linux 4.x

    Version Information
    Status: Stable
    Current Stable Version: 10.3.7
    Stable Release Date: 2020-11-29

    Created 2019-02-11
    Last Updated 2020-11-28
    127
    Downloads moved to post 1

    Thread Maintainer: @jslawler & @Akhil701
    68
    Flashing instructions moved to post 1

    Thread Maintainer: @jslawler & @Akhil701
    43
    Hi All,

    It's been long since I posted here and I hope everyone is safe and sound with the current situation on nCoV. I was busy with lot of work, travel and real-life situations and this will continue for some more time.

    I have assigned @jslawler as a maintainer for now and hopefully, he will keep the thread up to date.

    There is another slot empty and will also do the same for Beta and 6T threads if things go ok from here.

    Once again I regret any inconvenience that I may have caused due to being inactive maintaining the threads here and I look forward to the new guys doing the cleaning.

    Thank you all once again for your support over these difficult times.

    Be Safe

    Funk
    39
    Heads Up: The ROM Team has worked really hard in the last few months and as you all know, the First H2OS Pie Open Beta for OnePlus 6 was released today in China.
    If all goes well in initial testing we should soon have a global update :fingers-crossed:

    Hopefully stable users would have a option to dirty flash the P beta without any data loss however DP3 users might have to do a factory reset so please backup your data before hand.

    As always once on beta path you will receive beta updates only unless you fall back to stable build which will be a separate roll back build and which may require data wipe.

    I would do a separate thread as and when we get a beta release with instructions on how to update, so stay tuned for the official announcement.

    I would once again like to say that all the devices
    6/5/T/3/T are being worked upon when it comes to updates so would request the users with older devices to be patient in the meantime.

    Thank you once again for your continued support and stay tuned for more updates :good:

    Never Settle :fingers-crossed:

    PS: If you are one of those who can't wait to test P on your device and even ready to flash H2OS to do that here is the official link for you to test it.

    http://download.h2os.com/OnePlus6/O...2_OTA_002_all_1808141821_e23956624a874e16.zip

    MD5: 1767868E6D6730D9C895AD09EA1F23C3

    Source: https://www.h2os.com/download

    Sent from my CPH1871 using XDA Labs
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone