Yes I did the full ROM.
I didn't wipe or format anything prior to installing.
[Discussion & Feedback] OxygenOS Open Beta 6 for OnePlus 6T
- Thread starter Funk Wizard
- Start date
-
- Tags
- oneplus 6t open beta oxygenos
I didn't wipe or format anything prior to installing.
I don't know if you need to, but a full clean flash is usually recommended when moving to a new OS version.
TWRP 3.5.2
I did not not remove magisk.
I assumed I could just install it immediately after in TWRP.
TWRP 3.5.2
I did not not remove magisk.
I assumed I could just install it immediately after in TWRP.
No , you are correct uninstall magisk Is useful to prevent bootloop
Can't try to install android 11 cause i'm on holidays and can't risk to brick the phone
I can get in to Fastboot and I can get in to official recovery.
Anyway I can just flash the TWRP.img from fastboot?
Anyway I can just flash the TWRP.img from fastboot?
Yep. Sadly we're both learning the hard way that going from one OS release to another via OTA files can sometimes result in this risk.
I did not have time to wait so before bed I just reset everything.
I ended up using the MSM tool located here:
The Complete Guide to Unbrick OnePlus 6/6T from a Hard-Brick using MSMDownload Tool
Unlocked bootloader, installed TWRP & Magisk, installed A11 zip, everything is working again now.
I ended up using the MSM tool located here:
The Complete Guide to Unbrick OnePlus 6/6T from a Hard-Brick using MSMDownload Tool
Unlocked bootloader, installed TWRP & Magisk, installed A11 zip, everything is working again now.
Rooted 10.3.12 with TWRP and Magisk.
How I updated to Oxygen 11, which are the same steps as regular Oxygen 10 updates:
How I updated to Oxygen 11, which are the same steps as regular Oxygen 10 updates:
Download 11 ZIP to the root dir
Apply the 6T ROM update via: Settings > System > System Update > Local Upgrade
--> DON’T REBOOT <--
Open Magisk Manager - Touch the puzzle piece in the bottom right
Touch Install from Storage at the top
Select the TWRP mauronofrio installer zip twrp-3.4.0-11-fajita-installer-mauronofrio.zip
--> DON’T REBOOT <--
Click back to main Magisk screen
Click on the first ‘Install’, then select 'Direct Install (Recommended)'
--> DON’T REBOOT <--
Disable custom hosts or next step will fail
On main screen Magisk click on the first ‘Install’, then select 'Install to inactive slot (after OTA)'
--> DON’T REBOOT <--
On main screen Magisk, the second install is Magisk Manager - install it
--> Reboot <--
Verify Magisk and Magisk Manager
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
73
Hey everyone,
Here are the latest open beta builds for the OnePlus 6 and 6T.
Changelog
Code:[B]System:[/B] • Now unlock the LockBox without any problems in File Manager • No more crashes in the Launcher with apps in full-screen display • Got rid of blank screens while clearing up the background apps • Updated Android security patch to 2020.03
Note:
1. Please keep in mind that this is beta software. These builds are not as stable as our official OTAs. By installing this update, you accept the potential risks. As always, please share your feedback through https://forums.oneplus.com/feedback/. For more information on submitting bugs or suggestions please refer to How to report a bug and feel free to share your product suggestions via the Community app (please assign the category as OnePlus 6/6T with Android 10).
Please note:
- If you have already flashed an Open Beta (you are currently running the latest Open Beta), you will receive this new build as an OTA.
- If you are not running open beta software and would like to, please refer to the flashing instructions and the full ROM on the downloads page.
- Once you migrate to the beta path, you will continue to receive Open Beta OTAs. You will no longer receive the regular Official Stable OTAs.
- Moving back to the Official OTA path from the Beta path will require a full install and clean flash (full wipe of all data and cache).
Make sure to let us know how you feel about the beta builds here in the thread too, we are watching.
Click here to find out how to take logs on OxygenOS.
Downloads
Full Update
- OxygenOS: Official Link | Android File Host
- MD5 Hash: dbd4b426dfa9ff74f10f86cdb36d95eb
Stock Boot Image
- boot.img: UnOfficial
- MD5 Hash: da5040b05b10d894376bb7fd70dd45a5
- Android OTA payload dumper Tutorial: Link
Custom Recoveries
- Official/Unofficial TWRP by mauronofrio: Official Link
- blu_spark TWRP by eng.stk: Unified Official Link
- Black Out TWRP by acuicultor/Morphine1: Official Link
Root
- Magisk: Official Link
Warning: Do not flash partial update OTAs (under 1 GB) on a modified/rooted device! If you want to use partial OTAs, you must first flash the full OxygenOS zip that it applies to, and then flash the partial OTA from stock recovery. Flashing partial OTAs from TWRP will either fail or soft brick your device. You can return to a usable state by flashing one of the above full zips in recovery.
Installation Instructions
Download the necessary files from the section above and follow the steps below:
Note: Dirty flashing is fine if you are running an old OxygenOS version or a ROM based on OxygenOS. If you are, however, coming from a Custom ROM, you must clean flash.
Caution: Please remove your existing screen lock/pin/pattern/password and set it to swipe before starting the update process.
For Non-Rooted Users with a Locked Bootloader and Stock Recovery
- Download the full ROM zip from the downloads section above and place it in the root of your internal memory
- Reboot to Stock Recovery > Shutdown device > Press Volume Down + Power buttons together
- Select Language > Install menu > Install from internal > Select the full zip > Flash
- Reboot to System
[Dirty Flash] For Users with an Unlocked Bootloader and TWRP Recovery coming from Stable OxygenOS, OxygenOS Open Beta
- Download the full ROM zip and TWRP recovery from the downloads section above
- Transfer the full ROM zip and TWRP recovery to the root of your device's internal storage
- Reboot to TWRP recovery and take a nandroid backup of your existing ROM
- From the TWRP menu, Install > Select full ROM zip > Swipe to flash
- From the TWRP menu, Install > Select TWRP recovery zip > Swipe to flash
- Reboot to TWRP recovery
- Flash the latest stable Magisk in case you want to root
- Reboot to System
Warning: Dirty flashing (update) can be risky! Remember that if you face issues after dirty flashing, you will have to clean flash.
[Clean Flash] For Users with an Unlocked Bootloader and TWRP Recovery
- Download the full ROM zip and TWRP recovery from the downloads section above
- Transfer the full ROM zip and TWRP recovery to the root of your device's internal storage
- Reboot to TWRP recovery and take a nandroid backup of your existing ROM
- From the TWRP menu, Install > Select full ROM zip > Swipe to flash
- From the TWRP menu, Install > Select TWRP recovery zip > Swipe to flash
- Reboot to TWRP recovery
- From the TWRP menu, Wipe > Swipe to wipe
- Flash the latest stable Magisk in case you want to root
- Reboot to System
Never Settle.
XDA:DevDB Information
[Discussion & Feedback] OxygenOS Open Beta 6 for OnePlus 6T, ROM for the OnePlus 6T
Contributors
Funk Wizard, Akhil701
Source Code: https://forums.oneplus.com/threads/oxygenos-open-beta-6-for-the-oneplus-6-and-oneplus-6t.1209984/
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Beta
Current Beta Version: 6
Beta Release Date: 2020-04-08
Created 2019-01-30
Last Updated 2020-04-304037Thread cleaned.
Some posts were pointless, some were useless, most were complaints,
few were mature (but had to be removed since they were part of discussion )
Before posting in the thread , do the following steps.
1.)Read the thread title and first post.
2.) Check if the post you are going to make is relevant to thread
3.)If not , don't post.
In case you are not happy with a manufacturer/update/firmware/blah-blah-blah then make your decision with your wallets.
Don't go on complaining around random threads for the sake of complaining.
-XDA Staff34
No ETA due to release policy/non disclosure agreement but, both are close. You may have already received the play store update launcher/shelf addition of new features if you opted for beta along with some other updates. The team is working relentlessly on the launcher/shelf and there are many more features planned which i wont be able to disclose currently but all i can say it would turn up to your virtual assistant in the times to come and will give you a lot of information on the go.
Also some additional features/mode is under final testing on the alphas so it should trickle down soon along with other tweaks and welcome additions.
Pie build for 3/3T is all cooked and certified and ready to be delivered really shortly now so once that gets out of the way the focus will be more getting the builds out every 10-14 days on betas & 30-60 days on the stable path.
Also OnePlus OEF Developer conference in to take place in Goa where some of the top developers to come together on one platform early next month which will further step up third party development for the current and upcoming device.
Lots happening behind the scenes so i would thank the community for being patient so far and request for continued support as there is a lot to come in the next 3 months :good:
Stay Tuned :highfive:33
