[Discussion] PokeMon Go Magisk Discussion Thread

Search This thread

multimedias

Member
Apr 14, 2015
24
1
Hey there! I've done everything you said in past posts, but I still can't run the game for more than 20 sec "device is not compatible with pokemon go". However I can run the game, so can you help me to specifica the problem that prevents me to play the game for longer time. ( Lenovo k3 note / resurrection remix / magisk with safetynet pass / hidden magisk packages / no root, joystick or magisk files)

BTW, I did the same thing with my nexus 4 ( nitrogen 8.1 ) and everything works like a charm. I tried with nitrogen on my Lenovo too, but it does not work...

https://ibb.co/mE5Y6e
https://ibb.co/mRWvKz
https://ibb.co/je5cXK
https://ibb.co/kbiECK
https://ibb.co/mVXfme
 
Last edited:

Wetzel402

Senior Member
Jan 7, 2012
402
99
Running PoGo in a work container

I have Island working with Magisk and wanted to help explain the process...

  1. Uninstall PoGo
  2. Verify SafetyNet passes
  3. Install Island (or other work container app)
  4. Open the work container app and install PoGo from within the work container (this is important because you can mistakenly install outside of the container)
  5. Open PoGo and profit

So long as SafetyNet passes and PoGo is in the work container it should work as the work container will restrict what files/folder PoGo can read.
 
Last edited:

brqndon

Member
Jul 8, 2016
47
1
Upgraded to Pie and Magisk 17.1 on September release using the Essential PH-1, and now all of a sudden getting the incompatibility message. This is l already after hiding the Magic package and hiding the PoGo app.

Any tips would be super appreciated!
 

JD. A

Senior Member
  • Sep 9, 2013
    927
    260
    Upgraded to Pie and Magisk 17.1 on September release using the Essential PH-1, and now all of a sudden getting the incompatibility message. This is l already after hiding the Magic package and hiding the PoGo app.

    Any tips would be super appreciated!

    Did you hide both?
    Code:
    com.nianticlabs.pokemongo:pgp
    and
    Code:
    com.nianticlabs.pokemongo
     
    • Like
    Reactions: brqndon

    JD. A

    Senior Member
  • Sep 9, 2013
    927
    260
    Thanks for your response!

    I'm only seeing com.nianticlabs.pokemongo even after searching.

    Also, just wanted to mention I've already deleted the MagiskManager folder from storage. Still no luck.

    Yes you need to add the pgp one through the terminal. :good:

    Code:
    su
    magiskhide --add com.nianticlabs.pokemongo:pgp
     
    • Like
    Reactions: brqndon

    brqndon

    Member
    Jul 8, 2016
    47
    1
    Yes you need to add the pgp one through the terminal. :good:

    Thanks again for the prompt response.

    What am I doing wrong here?
     

    Attachments

    • Screenshot_20180919-141159.png
      Screenshot_20180919-141159.png
      127.5 KB · Views: 361

    brqndon

    Member
    Jul 8, 2016
    47
    1
    Thanks again for the prompt response.

    What am I doing wrong here?

    So it seems I was able to get PoGo working by uninstalling Magisk completely thus losing root, and then starting up PoGo once before rerooting again.

    Will report back if anything changes.

    Thanks for your prompt responses nonetheless!
     

    JD. A

    Senior Member
  • Sep 9, 2013
    927
    260
    So it seems I was able to get PoGo working by uninstalling Magisk completely thus losing root, and then starting up PoGo once before rerooting again.

    Will report back if anything changes.

    Thanks for your prompt responses nonetheless!

    I'm not sure what you did wrong. Whenever I flash a new rom I add pogo to magisk and then I add the pgp command through terminal.

    Oh did you hide the magisk app? In the settings menu you can hide the magisk app by scrambling the name.

    So first add pokemon go in magisk manger or the command prompt, including the pgp command also. (I'm on phone now can't be bothered with typing the code again)

    Second hide the magisk manager app like I explained above.

    Third remove any magisk folder.

    Fourth clear data on the pokemon app.

    Then you should be set and it should work. Sometimes you need to wipe the data when the app fails to authenticate when try to log in. I'm not sure if that's because of magisk though.

    Report back if you solve it. :good:

    EDIT: Did you type su and granted it root and then typed magiskhide --add com.nianticlabs.pokemongo:pgp? (the command above without the smiley). :silly:
     
    Last edited:

    brqndon

    Member
    Jul 8, 2016
    47
    1
    I'm not sure what you did wrong. Whenever I flash a new rom I add pogo to magisk and then I add the pgp command through terminal.

    Oh did you hide the magisk app? In the settings menu you can hide the magisk app by scrambling the name.

    So first add pokemon go in magisk manger or the command prompt, including the pgp command also. (I'm on phone now can't be bothered with typing the code again)

    Second hide the magisk manager app like I explained above.

    Third remove any magisk folder.

    Fourth clear data on the pokemon app.

    Then you should be set and it should work. Sometimes you need to wipe the data when the app fails to authenticate when try to log in. I'm not sure if that's because of magisk though.

    Report back if you solve it. :good:

    EDIT: Did you type su and granted it root and then typed magiskhide --add com.nianticlabs.pokemongo:pgp? (the command above without the smiley). :silly:

    I did indeed type su followed by the command, and I was greeted with the outcome as shown in the screenshot. So weird. And yes, I did all of the above mentioned steps. What got it working for me again was to uninstall Magisk completely, followed by starting up PoGo unrooted, and then reinstalling Magisk.
     

    negroxxx

    Senior Member
    Sep 12, 2016
    265
    42
    I have Island working and wanted to help explain the process...

    Uninstall PoGo
    Install Island (or other work container app)
    Open PoGo and profit


    So long as SafetyNet passes and PoGo is in the work container it should work as the work container will restrict what files/folder PoGo can read.
    are you a root user? would help me to configure island being root because I can not do it
     

    negroxxx

    Senior Member
    Sep 12, 2016
    265
    42
    Yes, I am a root user. I've updated my post to mention the instructions are for setting up Island with Magisk. If you follow the instructions PoGo should work for you.
    hi i am also a root user and i play pokemon using magisk. I wanted to use island but I always get the same error in the terminal
     

    Scolaro

    Senior Member
    May 8, 2011
    111
    29
    I have Island working with Magisk and wanted to help explain the process... [...]
    So long as SafetyNet passes and PoGo is in the work container it should work as the work container will restrict what files/folder PoGo can read.

    Thank you for your instructions!
    I tried Island, but even though the app installed without a problem Pogo still didn't work for me even from within the container. Someone explained in another thread that this was because Island didn't work as many users expected and that those users had their phones set up correctly already, so that's why it looked like Island was working for them. At least that was the gist - I tried, but couldn't find the posting of that person with the proper explanation, sorry about that.)

    Then I read about Secure Folder for Samsung and tried to install it on my Note 4. Of course the official version refused, as the Note 4 is not supposed to run Oreo, so I got the latest .apk. It wouldn't start though, not even after hiding root from it.

    However, after uninstalling Island, Secure Folder, Magisk, Magisk Manager and Pogo I tried again to get Pogo to run with root with the following steps:

    https://github.com/kantjer/MagiskFiles
    -> Install latest unofficial Magisk Manager (5.9.2.r12)
    -> Flash latest unofficial Magisk version (v17.2vr12) in TWRP
    Restart phone
    Magisk: Safety Check passes
    Hide/Repackage Magisk Manager
    Magisk: Safety Check passes
    Rename Magisk/root files ("Magisk..." into "M_gisk...", remove the word from "Magisk Manager" versions on SD card etc.)
    Install Pogo, don't run it afterwards
    Hide Pogo in Magisk Manager
    Start Pogo -> Pogo runs

    I'm a bit paranoid because in the past every time I thought I had the solution, the game would stop running 5 minutes later or upon restart, but I've started and restarted the game the whole afternoon and it seems to be running without a problem. OF COURSE I immediately created a NAND backup of my current setup and will only update the ROM and Magisk with trembling fingers from now on, but currently I'm carefully optimistic it may continue to work...good luck to anyone who still has problems. :D
     
    • Like
    Reactions: Wetzel402

    Wetzel402

    Senior Member
    Jan 7, 2012
    402
    99
    hi i am also a root user and i play pokemon using magisk. I wanted to use island but I always get the same error in the terminal


    Thank you for your instructions!
    I tried Island, but even though the app installed without a problem Pogo still didn't work for me even from within the container. Someone explained in another thread that this was because Island didn't work as many users expected and that those users had their phones set up correctly already, so that's why it looked like Island was working for them. At least that was the gist - I tried, but couldn't find the posting of that person with the proper explanation, sorry about that.)

    Then I read about Secure Folder for Samsung and tried to install it on my Note 4. Of course the official version refused, as the Note 4 is not supposed to run Oreo, so I got the latest .apk. It wouldn't start though, not even after hiding root from it.

    However, after uninstalling Island, Secure Folder, Magisk, Magisk Manager and Pogo I tried again to get Pogo to run with root with the following steps:

    https://github.com/kantjer/MagiskFiles
    -> Install latest unofficial Magisk Manager (5.9.2.r12)
    -> Flash latest unofficial Magisk version (v17.2vr12) in TWRP
    Restart phone
    Magisk: Safety Check passes
    Hide/Repackage Magisk Manager
    Magisk: Safety Check passes
    Rename Magisk/root files ("Magisk..." into "M_gisk...", remove the word from "Magisk Manager" versions on SD card etc.)
    Install Pogo, don't run it afterwards
    Hide Pogo in Magisk Manager
    Start Pogo -> Pogo runs

    I'm a bit paranoid because in the past every time I thought I had the solution, the game would stop running 5 minutes later or upon restart, but I've started and restarted the game the whole afternoon and it seems to be running without a problem. OF COURSE I immediately created a NAND backup of my current setup and will only update the ROM and Magisk with trembling fingers from now on, but currently I'm carefully optimistic it may continue to work...good luck to anyone who still has problems. :D

    If PoGo was installed correctly it should look like the attached screenshots. Your PoGo launcher shortcut should have the work container icon.

    If it still doesn't work for you then I'm not sure what the issue would be.
     

    Attachments

    • Screenshot_Island_20180920-125225.png
      Screenshot_Island_20180920-125225.png
      254.4 KB · Views: 452
    • Screenshot_Microsoft_Launcher_20180920-125207.jpg
      Screenshot_Microsoft_Launcher_20180920-125207.jpg
      179.8 KB · Views: 450
    • Like
    Reactions: Scolaro

    Scolaro

    Senior Member
    May 8, 2011
    111
    29
    If PoGo was installed correctly it should look like the attached screenshots. Your PoGo launcher shortcut should have the work container icon.
    If it still doesn't work for you then I'm not sure what the issue would be.

    That's exactly how it looked, but I still got the "device not compatible" error. Not to worry, though. It works now without Island, and even if it didn't I'd just remove Magisk again. Also, what works 100% for one phone doesn't necessarily work for another - this is not the only thread that clearly proves that. Most important is that everyone finds a solution that works for them (that's also why I posted my steps - they're not special, but they may still help someone).
    Still, thank you for taking the time to help out! :good:
     
    Last edited:
    • Like
    Reactions: Wetzel402

    PokemonTotalWar

    Senior Member
    Jan 29, 2014
    746
    202
    21
    1. Install strace binary if your system has not one (attached)
    2.
    Hey there, I'm trying to use strace to see what my Pokemon Go is detecting (I have two accounts, so I want one in Island and one not, like I used to), but every time I attach strace early enough to detect the file list, it crashes. If I connect it later, it doesn't crash, but obviously that's not useful. Is there any way to make strace work for this now?

    ---------- Post added at 05:04 AM ---------- Previous post was at 04:59 AM ----------

    I'm not sure what you did wrong. Whenever I flash a new rom I add pogo to magisk and then I add the pgp command through terminal.

    Oh did you hide the magisk app? In the settings menu you can hide the magisk app by scrambling the name.

    So first add pokemon go in magisk manger or the command prompt, including the pgp command also. (I'm on phone now can't be bothered with typing the code again)

    Second hide the magisk manager app like I explained above.

    Third remove any magisk folder.

    Fourth clear data on the pokemon app.

    Then you should be set and it should work. Sometimes you need to wipe the data when the app fails to authenticate when try to log in. I'm not sure if that's because of magisk though.

    Report back if you solve it. :good:

    EDIT: Did you type su and granted it root and then typed magiskhide --add com.nianticlabs.pokemongo:pgp? (the command above without the smiley). :silly:
    There's no reason to hide pgp anymore -- Magisk was updated a while ago to include subprocesses in MagiskHide. Add the main Pokemon Go through the Magisk interface and take a look at the log -- it adds pgp as well
     

    Top Liked Posts

    • There are no posts matching your filters.
    • 33
      01/11 INFO for Samsung Galaxy users searching for a Safetynet (SN) Green Response

      EDIT 18/11/16:

      It seems red CTS response in SN might not work with all phones, therefore I suggest you use an enforcing kernel to get a green screen response while using this tutorial.

      In case this method doesnt work in your phone, you might want to consider a new method using Magisk V9 and System Xposed + Root Switch (just to hide Xposed). This method will probably work in all phones and not just on Samsung phones.

      EDIT 07/11/16:

      1. It seems SN is now detecting if your SELinux Status is Permissive. This means 3 things, first, that you in fact can start the tutorial with a RED screen as long as Pokemon Go works fine (so even with red screen, open POK Go and see). Second, that only if you use a Enforcing kernel you wil get a green response (I guess this is important for users of other apps, not pokemon go at the moment. And thirdly, Arters Kernel (or any other SELinux permissive kernel) will show you a RED screen but it will let you play)
      2. Latest superSU SR3 works fine as well, and it doesn't take long to boot. So you might want to give it a try.

      -----
      Updated info for Samsung Galaxy users searching for a Safetynet (SN) Green Response after Oct. 31 update.

      First of all, I apologize for posting this here (because it doesn't involve Magisk) but I'll do it because I know it is mainly Magisk users who were affected by the update and because I didn't find another proper thread to post it (Suhide is not also used). So if anyone find a better/more proper thread to post it just let me know and I will move it. :good:

      [] Confirmed working until now on:
      - Galaxy S6/Galaxy S6 Edge running Alexis Rom 7.1.1 with Arter Kernel and version SR2 of SuperSU
      - Galaxy S7 with stock rom and kernel BUT using version SR1 of SuperSU instead of version SR2, also, using Custom Rom (Superman Rom 1.15.5 with superstock kernel)
      - Galaxy S7 Edge with stock rom and kernel using version SR2 of SuperSU
      - Sprint Note 5 with stock rom using version SR2 of SuperSU

      - S6 Edge + (European Version)

      * Galaxy S5 seems to need a different procedure, look for CM rom and for its proper method if you happen to have this phone.

      *What is working: Root (with SuperSU) + Custom Rom/Custom Kernel/Stock Kernel/PermissiveOrEnforcing SELinux status + Pokemon GO lastest version with GREEN/RED response in Safetynet Helper (depending on your SELinux state, which usually depends of your kernel) and working Xposed Modules related to Pokemon Go (Snorlax latest version)

      *What is not working: Other modules not related to Pokemon Go, like YouTube adaway or XtouchWiz are not working while Xposed is "disabled" (they won’t work while you play Pokemon Go, but if you "enable" Xposed Framework they will work just fine, so you can use your phone normal with all the modules and just disable Xposed when playing Pokemon Go).
      -----
      *Files you will need: ADB drivers for your specific Samsung model // RootPatch files (all the credits go to the original author Shakalaka) // SR2-SuperSU-v2.78-SR2-20161029143931.zip (all the credits go to the original author Chainfire) // RootSwitch-1.3.3.2.zip (Shakalaka again! I like his name :)) // Xposed Framework 86.1 or 86.2 (xposed-v86.1-sdk23-arm64-custom-build-by-wanam-20160904.zip or xposed-v86.2-sdk23-topjohnwu.zip (all the credits go to their respective authors) // Your Rom files and TWRP 3.0.2 (only if you decide to start from zero) // Proper uninstallers for Magisk/Xposed/Suhide/Root/etc // Arter Kernel (only if you want to change yours).

      * The first step is to have your phone working and communicating with your PC through ADB mode. A simple search will point you in the right direction of how to have your phone working properly in ADB mode. Different methods may be needed according to your model, but usually it’s just a matter of installing the proper drivers. Also, extract in one folder of your PC the files from the archive RootSwitch (RootPatch).

      * You need to start all the procedure with a GREEN SN response! OR WITH A RED RESPONSE (but only if Pokemon Go works fine even with the RED response, so open the app and try even if it is RED)
      -----
      1- Get your rom back to its initial Safetynet GREEN status (this obviously means that you need to uninstall root). You can do this in many different ways:

      The first one and most recommended is to fully uninstall Xposed + fully uninstall Magisk + uninstall previous related apks. ALSO, if you had suhide please uninstall it properly. You can do this by flashing their respective uninstall zip files in recovery and uninstalling the related apps normally in system mode. You can follow this steps to do so:
      a. Uninstall Makisk Manager apk and Root Switch apk: just through the normal uninstall procedure of any app you have in your phone.
      b. Uninstall Xposed: Flash in recovery xposed-uninstaller-20160211.zip (if you were using Wanams 86.1 version) or xposed-uninstaller-topjohnwu-20160820.zip (if you were using topjohnwu 86.2 version). Then wipe dalvik/cache.
      c. Uninstall Magisk V8: Flash in recovery Magisk-unistaller-20161004.zip. Then wipe dalvik/cache.
      d. Uninstall Suhide (only in case you were using it) by flashing suhide-rm-v0.51.zip
      e. Reboot into system
      f. Open Safetynet Helper App (you can download it from the Play Store) and check your response.

      If you are lucky you will have a GREEN response in Safetynet and, of course, you won't have root, and Xposed app will show a red screen saying framework is not installed. Consider yourself lucky! :)

      If after doing this steps you get a blue screen in Safetynet, then probably you may have the same case of my phone/Rom and you will need to do the following steps:

      a. If you use Arters kernel, then just reflash it and wipe dalvik/cache. Then SN should return a GREEN response.
      b. If you use another custom kernel, then try reflashing it. Keep in mind 2 things: Arters kernel doesn't include root by default, so that is why it always works fine just by reflashing it, with no further steps needed. BUT if your kernel auto roots your phone, then you will need to flash it, then reboot into system and unroot in the same way you usually do (probably with SuperSU app option or through recovery flashing the respective unroot zip file)

      The idea is to have your Rom with a GREEN Safetynet response, with no root and with no Xposed. This is needed to make things work properly, because only by starting with a GREEN response the rest of the guide will work.

      If none of the options until here worked, then I'm afraid this is your last option:

      a. Reflash a Stock Firmware from Sammobile. A stock kernel/rom should not triger Safetynet, it should be green and with Pokemon Go working. This will leave you with stock recovery/kernel (so you will need to flash TWRP 3.0.2 in Odin if you want to make nandroid backups) and you will have to use your Rom as Stock.

      ( ) AGAIN, supposing you are using a Custom Rom that uses SuperSU root. Reflash your kernel, unroot with SuperSU app, then check Safetynet, if it is green you don´t need to change your current kernel. If its blue, then you will probably need a different kernel for your phone. Those kernels that come with no root has better chances of helping you get a GREEN SN response.

      *Please BE SURE to use only kernels that are specific for your devices, don't 'break' your device unnecessarily.
      ** If you didn't Wipe Dalvik/Cache during the previous steps, please Wipe Dalvik/Cache before you continue, as some Xposed files only dissapear with this.
      ***Suggestion for S6 and S6 edge users: I use Alexis ROM and Arter Kernel on my Galaxy S6 Edge, if you have never tried a Custom Rom for your Galaxy S6, you can be sure this Custom ROM+Custom Kernel is one the best combinations available for our phone models. Latest version 7.1.1 works fine.

      ---- CHECKPOINT 1----: reboot/double check that SN is GREEN/PASSING and that POKGO works fine, if you did well on the previous steps your Safetynet Helper result should be GREEN. If you are with a different screen report and tell which kernels/roms you are using and which ones did you tried, because having a blue/red screen is probably related to your kernel/rom choice or with an unsuccessful uninstalling procedure of previous Xposed/Magisk. If you are GREEN in Safetynet Helper, I suggest you make a full nandroid backup (or at least of the boot.img part, it will save you some time and troubles later)
      ----
      2- Search for the folder were you extracted the RootSwitch patch files. You need 2 files: custom_ramdisk_patch.sh and dot.supersu. Then, supossing you already have your ADB drivers working, connect your device to your USB port and accept the connection in your device. Then inside the folder where you have your ADB files press Ctrl + Shift + Right click on a free space of the folder to open the right click menu to select the option "open a new command window here". A CMD window should open, type: adb devices , and if your drivers were installed correctly you will see your device listed. If you don't see your device listed then don't continue, just search for the proper way to have your phone working with ADB mode and try this step again.

      Now reboot your phone into TWRP recovery (leave the USB cable connected to your PC) and in the CMD (same black window from the last step type: adb push custom_ramdisk_patch.sh /data
      And press enter. You will see that a file was transfered/pushed to your phone. Then in the same window type: adb push dot.supersu /data/.supersu
      And press enter again. You will also see that another file was transferred.

      Then in your phone press the Install option and flash the SR2-SuperSU-v2.78-SR2-20161029143931.zip file in systemless mode.
      * In my phone/Rom in autoinstalls in Systemless mode by default. BUT If your phone/Rom doesn't do this then you will need to type the command: echo "SYSTEMLESS=true" > /data/.supersu in TWRP Terminal option before flashing the file (note that there will not be any confirmation, you just type the comand and press the big arrow/enter, a new line should begin with # symbol, that's all, there is no other confirmation.
      ----
      3- After flashing SR2-SuperSU-v2.78-SR2-20161029143931.zip reboot into system mode and open the superuser app once and then close it. Confirm that root is working in your phone (if booting takes longer than normal then you are probably rooted. If booting is very fast, then probably you didn’t install root properly). You can confirm that you have root by opening an app that uses root (like Adaway or TitaniumBackup), it will ask for root permissions. If root is working, then you can continue with the next steps.

      **If you find something saying that "binaries need to be updated" it is because root wasn't installed properly, reboot once and check again (sometimes rebooting makes root work properly). If it says the same then reflash again the SuperSu file doing the same procedure. If even like this it doesn't work, then try the same procedure BUT WITH VERSION SR1 of superuser (SR1-SuperSU-v2.78-SR1-20160915123031.zip). Some users have reported this fix the "update binaries" problem in some devices.

      * Please keep in mind that NO Suhide flash is needed! It will trigger SN. Don’t flash any Suhide.
      ----
      4- Install Root Switch 1.3.3.2 apk file. Open it once, it should ask for root permissions, accept them and then close the app and open it again. Now press the root “disable” switch. NO XPOSED OPTION SHOULD BE AVAILABLE AT THIS POINT OF THE GUIDE, if you have something saying “magisk is not supported” or “Systemless Xposed is not supported” then I suggest you read and redo the first steps of the guide again in order to uninstall all properly.
      ----
      5- Check your SN response. It should be green if you did everything well.

      ---- CHECKPOINT 2----: With SuperSU + Root Switch “disabling” root you should have root working properly and with a GREEN/PASS Safetynet response. Check that in fact it is working for you. If you have a blue/red screen, then reopen the Root Switch app and try enabling and disabling root again.
      If this doesn’t work, then probably you have a Samsung device were this method doesn’t work.
      If you do have everything in order, REENABLE ROOT IN THE APP!, then reboot into recovery and make a full nandroid backup!! Here is not optional. Just do it! :)…you don’t want to do all this steps again :).
      ----
      6- Flashing Xposed: my advice is to use Wanams Samsung Xposed file. Flash it in recovery mode and then reboot and install the latest Xposed apk (by topjohnwu). You could also use the old Xposed apk, it is up to you. You should now have a green screen saying you have framework installed and working properly.

      * Keep in mind some things when flashing Xposed files:
      a. If you had any different version of Xposed installed and you didn’t uninstall it properly, then it will probably cause problems. Uninstall Xposed with the proper zip file as mentioned in previous steps.
      b. Important fact! every time you uninstall Xposed you need to WIPE DALVIK/CACHE. Otherwise files will remain triggering Safetynet and messing with the installation of other Xposed versions.
      c. If you have a red screen on Xposed app reboot into recovery and flash again Xposed. Then only to options that would work are when you get a green screen or a yellow/orange screen (mentioning that the framework is installed)
      * If Wanams version doesn’t install properly, then you can try to install version 86.2 in SYSTEM mode. The installer has to mention it is installing in SYSTEM mode. Otherwise it won’t work/it won’t be hidden.
      Continue to the next steps when you have Xposed installed properly.
      ----
      7- Open Xposed app and grant root acces to Xposed (to do this press soft reboot option in the app and it will ask for root permissions). Install your Xposed modules, activate them and reboot.

      ----
      Safetynet should be Blue (failing now) up to this point because it detects Xposed. When you double check that Xposed is installed and your modules are working normally you can continue to the next steps (hidding Xposed so you can play Pokemon Go while Snorlax is doing its magic)

      ----CHECKPOINT 3----: Safetynet should fail and give you a blue screen but root and your xposed modules should be working. Try with other modules like Youtube Adaway or just make sure they are working. Only if Xposed modules are working, continue with the next steps.
      -----
      8- Open the RootSwitch-1.3.3.2 apk again and this time you should have a Switch for Xposed as well. Disable ONLY Xposed first (the second option/switch at the bottom) and it will soft reboot (it is normal and necessary to make the hide trick work)!
      ----
      9- Open the Xposed apk and if everything went well it will show a yellow screen BUT your Pokemon modules will be working (Snorlax).
      ----
      10- Open the RootSwitch-1.3.3.2 apk again and this time disable root. Both switches should be gray/disabled. Then go and open the Safetynet app and it the response should be GREEN. If you have made it this far go and try Pokemon GO and check that in fact Snorlax is working. If it is working…you already know what to do: make a full nandroid backup and keep it safe in your pc ;).
      * Keep in mind that TWRP full backups are usually big files and might take a lot of space from your storage. I usually only keep the last backup (where everything is working).
      -----
      11. Lastly, TO KEEP IN MIND: when you reboot your phone your Xposed modules (Snorlax) will probably not work anymore after reboot. To make things work properly after a reboot:
      a- Open Root Switch app
      b- Enable root and then Xposed (it will soft reboot)
      c- Do a normal reboot (Xposed screen should be green and safetynet should be failing)
      d- Open again root switch app and disabled Xposed again (it will soft reboot)
      e- Then disable root and you are good to go. Snorlax should be working fine again.
      I am sure that at least the latest version of Snorlax is working until the date of this post (01/11), but I haven´t tried other versions of it.
      ----
      12- Enjoy the game with the proper IV’s!!
      ----

      [ ] If this was helpful to you I would like to ask for 2 things:
      1- Press the thanks button ;)
      2- The most important. Please mention me (quote is to long:eek:) on your post specifying which phone model did you use, which rom, which kernel and if you did any other step to make it work. Only like this I can keep the post updated with the Samsung models that have been confirmed working.
      Also, if you have troubles, post your basic information so people can help you: phone, rom, kernel, your last working checkpoint of the guide :good:

      Thanks a lot!.:highfive:
      26
      [size=+2]
      This thread has been created to reduce the amount of clutter in the main Magisk thread, please discuss Magisk + PokeMon Go here.
      [/size]
      17
      Alright, this is nasty.

      I've updated to v0.115.2 on my _stock, unrooted_ Note 4 (it was rooted before, and has its Knox fuse blown,. but has been compoletely unrooted and reflashed to stock since then; system status is "Official"). It immediately gave me the unauthorized device error. I double-checked to make sure nothing was left behind from the former root - I even went as far as installing TWRP to check the data & cache partitions for any root residue, finding nothing, and then again reflashing a full stock ROM using Odin. I checked again for root-related apps, as well as anything Niantic may consider a cheating app (like Calcy IV), and get rid of everything that could even be remotely suspicious. No dice, still unauthorized device.

      What finally got it to work shocked me beyond belief. I went through the internal & external SD card, and deleted everything related to rooting (flashable-looking zips, APKs of root-related apps, logfiles, Titanium Backup, any folder with "root", "magisk" or "xposed" in its name, etc - many of them stuff I copied over from my previous phone, never installed on this one). And magically, Pokemon Go started working!

      Bottom line: Pokemon Go is abusing its storage read permissions to scan the storage for evidence of rooting. Magisk will need to redirect Pokemon Go's storage accesses to controlled "sandbox" directories, and prevent it from reading the real internal or external storage. (Simply blocking storage access won't work, as the game actually writes to internal storage.)
      17
      List of files, P-go trying to access before crash:
      In my case, problem caused by busybox installer and crashes happened on unrooted device too.
      Code:
      /system/xbin/su
      /data/app-lib/net.snclab.RootKeepSurvival-1
      /data/data/com.saurik.substrate
      /data/data/com.ramdroid.appquarantinepro
      *My case* /data/data/stericson.busybox
      /lib/libAndroidCydia.cy.so
      /system/bin/app_process64_original
      /data/app/net.snclab.RootKeepSurvival-1.apk
      /su/bin/su
      /system/bin/failsafe/su
      /system/usr/we-need-root/su
      /system/bin/su
      /data/local/su
      /data/local/bin/su
      /system/lib/libsupol.so
      /.subackup
      /data/app/stericson.busybox-2.apk
      /data/app/com.RootBackupKeeper13_3-1.apk
      /dev/com.koushikdutta.superuser.daemon/server
      /system/etc/.installed_su_daemon
      /data/data/com.devadvance.rootcloakplus
      /data/data/com.koushikdutta.superuser
      **Use MgiskHide**/magisk
      /lib/libsubstrate-dvm.so
      /data/app/org.projectvoodoo.otarootkeeper-1.apk
      /system/xbin/amphoras
      /dev/com.mypackagename.superuser.daemon
      /dev/com.koushikdutta.superuser.daemon
      /data/data/com.amphoras.hidemyrootadfree
      /data/app-lib/sa.root.toolkit-1
      /data/app-lib/com.troy1103.hideyourroot-1
      /data/app-lib/com.formyhm.hideroot-1
      /data/data/de.robv.android.xposed.installer
      /data/app-lib/com.jrummy.busybox.installer-1
      /dev/com.thirdparty.superuser.daemon
      /system/xbin/daemonsu
      /lib/libAndroidLoader.so
      /data/app-lib/com.RootBackupKeeper13_3-1
      /data/data/com.noshufou.android.su.elite
      *Not Issue*/system/bin/ls
      /data/data/com.amphoras.hidemyroot
      *Not issue*/system/bin/toolbox
      /system/etc/init.d/99SuperSUDaemon
      /lib/libSubstrateRun.so
      *Not Issue* /dev/null
      /data/dcata/com.jrummy.busybox.installer
      /system/lib64/libsupol.so
      /data/app-lib/org.projectvoodoo.otarootkeeper-1
      /system/app/Superuser.apk
      /data/local/xbin/su
      /data/data/com.noshufou.android.su
      /data/data/com.RootBackupKeeper13_3
      /server
      /data/data/com.mypackagename.superuser
      /sbinpolicy
      /vendor/lib/liblog!.so
      /data/data/net.snclab.RootKeepSurvival
      /data/app/sa.root.toolkit-1.apk
      /data/data/com.formyhm.hiderootPremium
      /dev/.su.d
      *Not Issue*/system/bin/cat
      *Not Issue*/system
      /data/data/com.chelpus.lackypatch
      /bin/sh
      /bin/app_process_init
      /data/data/com.zachspong.temprootremovejb
      *Not Issue*/proc/self/status
      *Use MagiskHide* /sbin/su
      /lib/libDalvikLoader.cy.so
      /data/data/sa.root.toolkit


      My remarks:
      *Use MagiskHide* - Magisk hide taking care of this file. See in the thread. You can also unroot device to remove this.
      *Not Issue* - Normal system file that the application need to work.
      *My case* - Application that causes P-go to crash even without root. This is non busybox. This is only Installer/updater. Uninstalling the application not removing bb, but, in my case, resolving the problem.
      Uncommented lines: Parts of another rooting applications (not Magisk) or Xposed or unwanted by Niantik apps, that you need to hide or remove to get P-go stable.
      16
      Anyone who would like to test adding pokemon go to magiskhide early.. you can do this without a updated manager.

      This seems to have fixed the crashing for me.

      Open a terminal emulator and punch in the following:
      Code:
      su magiskhide --add com.nianticlabs.pokemongo

      EDIT: Some users reporting issues with the one line, if this includes you try the following:

      Code:
      su
      magiskhide --add com.nianticlabs.pokemongo
    Our Apps
    Get our official app!
    The best way to access XDA on your phone
    Nav Gestures
    Add swipe gestures to any Android
    One Handed Mode
    Eases uses one hand with your phone