[DISCUSSION] Possible Hard Brick Fix

[benzersizadam]

Ok guys i have heard lots of Qualcomm 9008 device bricks. I have an idea to fix it. Dont know if it is possible.

First of all refer to this thread : http://forum.xda-developers.com/lg-g3/general/fix-unbrick-lg-g3-stuck-qualcomm-hs-usb-t2933853

There is a possiblity to write all parts but board diag doesnt work with G4.

I also have Nubia Emmc Write tool. But when i tried to flash rom from exrracted it needs xml file. I think this XML files refers to rom parts on chipset addresses.

So if someone can post or send me kind a file like this or a board diag which is supported with G4 there will be huge possiblity to test.

Please let us know what you think.

 

[T-95]

gays said z3x easy jtag can repair it!

 

[Salik Iqbal]

gays said z3x easy jtag can repair it!

Have you found any working method for g4?

 

[TheMadScientist]

Ok guys i have heard lots of Qualcomm 9008 device bricks. I have an idea to fix it. Dont know if it is possible.

First of all refer to this thread : http://forum.xda-developers.com/lg-g3/general/fix-unbrick-lg-g3-stuck-qualcomm-hs-usb-t2933853

There is a possiblity to write all parts but board diag doesnt work with G4.

I also have Nubia Emmc Write tool. But when i tried to flash rom from exrracted it needs xml file. I think this XML files refers to rom parts on chipset addresses.

So if someone can post or send me kind a file like this or a board diag which is supported with G4 there will be huge possiblity to test.

Please let us know what you think.

I know both g 2 and g3 had hardbrick fixes by grounding a pin out now i do know thT when u go through eemc write board diag u need the tot or kdz of the firmware ure phone was bricked on so if u bricked zv6 u have to get ure boot table from a zv6 tot

 

[T-95]

for repair need dump from same phone, no i try to find lg g4 h810 dump, only after that can repair it via jtag

 

[Shabby The Dev]

for repair need dump from same phone, no i try to find lg g4 h810 dump, only after that can repair it via jtag

I think to find those files to repair via emmc pinouts you need octoplus jtag pro this box give new update for lg g4s dead boot repair
but we want this repair via usb cable as i heard that someone repair it via usb cable in my country but don't really know how
So this was our hope that it was repair by usb cable
I think we want to make some hard work for finding those files to repair this

With my opinion
We need following files to repair this phone
1st msm8992 emmc ddr.mbn
2nd msm8992loader.hex
3rd our phone's rawprogram.xml and some sbl1 files

1st file was shared by someone in xda forum this file is from another phone but same emmc


Br
Shahzaib Jahangir

 

[GiaiPhapAndroid]

I think only unbrick z3 easy ztag for now

 

[benzersizadam]

I think to find those files to repair via emmc pinouts you need octoplus jtag pro this box give new update for lg g4s dead boot repair
but we want this repair via usb cable as i heard that someone repair it via usb cable in my country but don't really know how
So this was our hope that it was repair by usb cable
I think we want to make some hard work for finding those files to repair this

With my opinion
We need following files to repair this phone
1st msm8992 emmc ddr.mbn
2nd msm8992loader.hex
3rd our phone's rawprogram.xml and some sbl1 files

1st file was shared by someone in xda forum this file is from another phone but same emmc


Br
Shahzaib Jahangir

Cant agree more. If we dump a G4 we can make same way. But we need to be sure that if it works as the same logic with g2 or g3

 

[Shabby The Dev]

Cant agree more. If we dump a G4 we can make same way. But we need to be sure that if it works as the same logic with g2 or g3

What you exactly mean dump as I see i have dump for ls996 zv6 and zv7 emmc img file which was taken by working phone but my phone is ls991 if you want so i will upload

Sorry for bad english


Br
Shahzaib Jahangir

 

[benzersizadam]

What you exactly mean dump as I see i have dump for ls996 zv6 and zv7 emmc img file which was taken by working phone but my phone is ls991 if you want so i will upload

Sorry for bad english


Br
Shahzaib Jahangir

we need a dump from EXACTLY same model.

 

[Shabby The Dev]

we need a dump from EXACTLY same model.

Ok when i get this phone so i make the dump from it and upload it
Can you please guide me what is the dd commands for backup whole emmc

And one more thing i have octoplus box in this software there is dump nand option but when i start dump nand on this software it was backup the phone on download mode but by backing up it take so long time and the backup file was .bin format if you want this dump backup .bin file or dump.img file


Br
Shahzaib Jahangir

 

[technoid1964]

Anyone have luck resurrecting an LG H810 from the Qualcomm 9008 mode yet? Or get the files for OCTOPLUS?

 

[Shabby The Dev]

Anyone have luck resurrecting an LG H810 from the Qualcomm 9008 mode yet? Or get the files for OCTOPLUS?

I think the only solution is jtag
some device supported it

 

[irbaaz]

Hi My phone got bricked LG G4 LS991.
I am about to buy octopus box LG with no-JTAG support will this help me to sort my issue or I need a JTAG one?

 

[irbaaz]

Here is the ZV6 LS991 Dump file.

http://www.gsm-file.com/index.php?route=download/confirm&dl_file_id=4035

 

[Noksucow1]

I have a US991. I am able to create the file system on SD card and the phone while turn on and say Secure Boot Error 1006 and OFFICIAL underneath. I messed around for a while and made it change to LGE AndroidNET USB which does not show boot looping screen, but I can't replicate that again yet on my SD card.. I can do this with the LS991 dump and the files from a KDZ as well. I'm not sure what else to do? The trick here is to create the phones boot loader/file system on an SD card then insert it into the phone so you can get into download mode and flash.

 

[ifhii]

I have a US991. I am able to create the file system on SD card and the phone while turn on and say Secure Boot Error 1006 and OFFICIAL underneath. I messed around for a while and made it change to LGE AndroidNET USB which does not show boot looping screen, but I can't replicate that again yet on my SD card.. I can do this with the LS991 dump and the files from a KDZ as well. I'm not sure what else to do? The trick here is to create the phones boot loader/file system on an SD card then insert it into the phone so you can get into download mode and flash.

how can i write booting files on sd card ?

 

[poog]

I have a US991. I am able to create the file system on SD card and the phone while turn on and say Secure Boot Error 1006 and OFFICIAL underneath. I messed around for a while and made it change to LGE AndroidNET USB which does not show boot looping screen, but I can't replicate that again yet on my SD card.. I can do this with the LS991 dump and the files from a KDZ as well. I'm not sure what else to do? The trick here is to create the phones boot loader/file system on an SD card then insert it into the phone so you can get into download mode and flash.

HI, they are working on this I think......in this thread......with some success.
http://forum.xda-developers.com/tmobile-g4/help/unbrick-lg-g4-h811-9008-qualcomm-t3456421

It seems like you have an idea of what is going on.. I guess the idea is to have the proper DUMPS from all the variants.

What do you think about their progress? I think about their progress? Is it related to your suggestions and problems with your LS991? I think they are suggesting to make available all variant dumps.

 

[blooddrunk1990]

Reply

Ok guys i have heard lots of Qualcomm 9008 device bricks. I have an idea to fix it. Dont know if it is possible.

First of all refer to this thread : http://forum.xda-developers.com/lg-g3/general/fix-unbrick-lg-g3-stuck-qualcomm-hs-usb-t2933853

There is a possiblity to write all parts but board diag doesnt work with G4.

I also have Nubia Emmc Write tool. But when i tried to flash rom from exrracted it needs xml file. I think this XML files refers to rom parts on chipset addresses.

So if someone can post or send me kind a file like this or a board diag which is supported with G4 there will be huge possiblity to test.

Please let us know what you think.

got a single image file for the lg g4 h811 with the xml files can you send me a copy of the nubia eemc dump tools?????????????? [email protected]

 

[gdeepp]

hello dear is these file are unbrick g4 .....can buy it or its fake

---------- Post added at 10:05 PM ---------- Previous post was at 10:04 PM ----------

http://www.easy-firmware.com/index.php?a=browse&b=category&id=17384